DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김성훈 | ko |
dc.contributor.author | 김원경 | ko |
dc.contributor.author | 박윤식 | ko |
dc.date.accessioned | 2013-02-27T04:14:12Z | - |
dc.date.available | 2013-02-27T04:14:12Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1992-11 | - |
dc.identifier.citation | 대한기계학회논문집 A , v.16, no.11, pp.2049 - 2058 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/66379 | - |
dc.description.abstract | In this work, a 6 degree of freedom lumped mass model is constructed for an OHC-type cam valve train anylysis and the model is verified experimentally. Using the verified model an optimal cam profile is designed to minimize the maximum contact force between cam and follower under the constraints such as cam lift and cam event angle. The designed cam was carefully machined and tested experimentally. As operating the designed cam shaft on the testrig, the valve motion was precisely measured with laser displacement meter and the contact force was indirectly monitored by measuring strain at a certain point of the finger follower. Judging from the model simulation and experiment results, the maximum contact force can be reduced as much more then 20 percent under maintaining the original valve flow area by adopting the optimum cam profile. | - |
dc.language | Korean | - |
dc.publisher | 대한기계학회 | - |
dc.title | OHC형 캠-밸브 기구의 최적 캠 형상설계 및 실험적 검증 | - |
dc.title.alternative | Optimum Cam Profile Design and Experimental Verification on an OHC Type Cam-valve System | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 16 | - |
dc.citation.issue | 11 | - |
dc.citation.beginningpage | 2049 | - |
dc.citation.endingpage | 2058 | - |
dc.citation.publicationname | 대한기계학회논문집 A | - |
dc.contributor.localauthor | 박윤식 | - |
dc.contributor.nonIdAuthor | 김성훈 | - |
dc.contributor.nonIdAuthor | 김원경 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.