Browse "ME-Journal Papers(저널논문)" by Subject COMBUSTION
Showing results 1 to 57 of 57
| A catalytic burner using propane and toluene alternately for the drying of textile coatings Seo, YS; Kang, SK; Shin, Hyun Dong, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.23, no.6, pp.543 - 556, 1999-05 |
| A numerical study on propagation of premixed flames in small tubes KIM, NAM IL; Maruta, K, COMBUSTION AND FLAME, v.146, no.1-2, pp.283 - 301, 2006-07 |
| A numerical study on the effect of flow distribution on reactor performance Cho, HC; Shin, Hyun Dong, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.23, no.15, pp.1313 - 1324, 1999-12 |
| A single n-heptane droplet behavior in rapid compression machine Kim, Hyemin; Baek, Seung-Wook; Chang, Daejun, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.69, pp.247 - 255, 2014-02 |
| A VISUAL STUDY OF THE STRUCTURE OF TURBULENT NONPREMIXED FLAMES NEAR JET EXIT Kim, SJ; Shin, Hyun Dong, COMBUSTION SCIENCE AND TECHNOLOGY, v.99, no.1-3, pp.37 - 37, 1994 |
| Application of double-injection strategy on gasoline compression ignition engine under low load condition Kim, Dong Hoon; Bae, Choongsik, FUEL, v.203, pp.792 - 801, 2017-09 |
| AUTO-IGNITION CHARACTERISTICS OF SINGLE n-HEPTANE DROPLET IN A RAPID COMPRESSION MACHINE Kim, Hyemin; Baek, Seung-Wook; Chang, Daejun, COMBUSTION SCIENCE AND TECHNOLOGY, v.186, no.7, pp.912 - 927, 2014-02 |
| Behavior of hydrogen hollow-cone spray depending on the ambient pressure Lee, Sanguk; Kim, Gyeonggon; Bae, Choongsik, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.46, no.5, pp.4538 - 4554, 2021-01 |
| Breakup characteristics of a single-droplet of water-in-oil emulsion impinging on a hot surface Jang, Gyu Min; Kim, Nam Il, FUEL, v.291, 2021-05 |
| Characteristics of a Multi-jet Burner in Oxy-Liquefied Petroleum Gas (LPG) Flames Kim, Hyeon Jun; Choi, Wonyoung; Bae, Soo Ho; Shin, Hyun Dong, ENERGY & FUELS, v.23, pp.1456 - 1463, 2009-03 |
| Characteristics of opposed flow partially premixed flames in mesoscale channels at low strain rates Lee, Min-Jung; Cho, Moon Soo; KIM, NAM IL, PROCEEDINGS OF THE COMBUSTION INSTITUTE, v.35, no.3, pp.3439 - 3446, 2015-01 |
| Dynamic simulation of the circulating fluidized bed loop performance under the various operating conditions Kim, Seongil; Choi, Sangmin; Lappalainen, Jari; Song, Tae-Ho, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, v.233, no.7, pp.901 - 913, 2019-11 |
| Effect of an inlet temperature disturbance on the propagation of methane-air premixed flames in small tubes KIM, NAM IL, COMBUSTION AND FLAME, v.156, no.7, pp.1332 - 1338, 2009-07 |
| Effect of coal type on gasification in pressurized drop tube furnace Cho, HC; Cho, KW; Lee, YK; Shin, Hyun Dong; Ahn, DH, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.25, no.5, pp.427 - 438, 2001-04 |
| Effect of exhaust gas recirculation (EGR) and multiple injections on diesel soot nano-structure and reactivity Rohani, Behzad; Bae, Choongsik, APPLIED THERMAL ENGINEERING, v.116, pp.160 - 169, 2017-04 |
| Effect of fuel characteristics on the thermal processes in an iron ore sintering bed Yang, W; Yang, KK; Choi, Sangmin, JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, v.48, no.2, pp.316 - 321, 2005-05 |
| Effect of injection strategy on smoothness, emissions and soot characteristics of PCCI-conventional diesel mode transition Rohani, Behzad; Park, Stephen Sungsan; Bae, Choongsik, APPLIED THERMAL ENGINEERING, v.93, pp.1033 - 1042, 2016-01 |
| Effective utilization of operating condition in production of sintered ore Kang, Hee Jin; Choi, Sangmin; Yang, W.; Cho, B., PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, v.226, no.A1, pp.37 - 48, 2012 |
| Effects of a split injection in a spray-guided direct-injection spark ignition engine under lean stratified operation Oh, Hee Chang; Bae, Choongsik, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, v.228, no.10, pp.1232 - 1244, 2014-09 |
| Effects of diesel fuel temperature on fuel flow and spray characteristics Park, Youngsoo; Hwang, Joonsik; Bae, Choongsik; Kim, Kihyun; Lee, Jinwoo; Pyo, Soonchan, FUEL, v.162, pp.1 - 7, 2015-12 |
| Effects of Multi-Stage Split Injection on Efficiency and Emissions of Light-Duty Diesel Engine Kang, Seungwoo; Lee, Sanguk; Bae, Choongsik, ENERGIES, v.15, no.6, 2022-03 |
| Emission reduction through internal and low-pressure loop exhaust gas recirculation configuration with negative valve overlap and late intake valve closing strategy in a compression ignition engine Kim, Jaeheun; Bae, Choongsik, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.18, no.10, pp.973 - 990, 2017-12 |
| Evaluation of polychlorinated dibenzo-p-dioxin/dibenzofuran (PCDD/F) emission in municipal solid waste incinerators Shin, DH; Choi, Sangmin; Oh, JE; Chang, YS, ENVIRONMENTAL SCIENCE TECHNOLOGY, v.33, no.15, pp.2657 - 2666, 1999-08 |
| Exhaust gas fuel reforming for hydrogen production with CGO-based precious metal catalysts Choi, Seunghyeon; Bae, Joongmyeon; Lee, Juhun; Cha, Jeonghwa, CHEMICAL ENGINEERING SCIENCE, v.163, pp.206 - 214, 2017-05 |
| Experimental and numerical study on the laminar premixed flame stabilized inside a honeycomb ceramic Lee, YI; Shin, Hyun Dong; Baek, Seung-Wook, COMBUSTION SCIENCE AND TECHNOLOGY, v.112, pp.75 - 75, 1996 |
| Experimental investigation of the developing process of an unsteady diffusion flame Park, J; Shin, Hyun Dong, COMBUSTION AND FLAME, v.110, no.1-2, pp.67 - 77, 1997-07 |
| Experimental study on the effects of high/low pressure EGR proportion in a passenger car diesel engine Park, Youngsoo; Bae, Choongsik, APPLIED ENERGY, v.133, pp.308 - 316, 2014-11 |
| Extinction of an evolving jet flame under a linearly-varying flow field Lee, EJ; Shin, Hyun Dong, COMBUSTION THEORY AND MODELLING, v.8, no.1, pp.85 - 95, 2004-03 |
| Flame structures and behaviors of opposed flow non-premixed flames in mesoscale channels Lee, Min Jung; KIM, NAM IL, COMBUSTION AND FLAME, v.161, no.9, pp.2361 - 2370, 2014-09 |
| Highly active and stable catalyst with exsolved PtRu alloy nanoparticles for hydrogen production via commercial diesel reforming Lee, Jaemyung; Yeon, Changho; Oh, Jiwoo; Han, Gwangwoo; Do Yoo, Jeong; Yun, Hyung Joong; Lee, Chan-Woo; et al, APPLIED CATALYSIS B-ENVIRONMENTAL, v.316, 2022-11 |
| Improved distribution of fuel particles in iron ore sintering process Hou, P.; Choi, Sangmin; Choi, E.; Kang, H., IRONMAKING STEELMAKING, v.38, no.5, pp.379 - 385, 2011-07 |
| Improvement of operating conditions in waste incinerators using engineering tools Yang, Won; Nam, Hyung-sik; Choi, Sangmin, WASTE MANAGEMENT, v.27, no.5, pp.604 - 613, 2007 |
| Inhibition effect of carbon dioxide on the oxidation of hydrogen over a platinum foil catalyst Nam, CH; Shin, Hyun Dong, CATALYSIS TODAY, v.83, pp.257 - 264, 2003-08 |
| Intake air strategy for low HC and CO emissions in dual-fuel (CNG-diesel) premixed charge compression ignition engine Shim, Euijoon; Park, Hyunwook; Bae, Choongsik, APPLIED ENERGY, v.225, pp.1068 - 1077, 2018-09 |
| Investigation of gas-phase reactions in the mixing region for hydrocarbon autothermal reforming applications Kim, Sun-Young; Carstensen, Hans-Heinrich; Dean, Anthony M.; Bae, Joong-Myeon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.37, no.9, pp.7545 - 7553, 2012-05 |
| Knock Characteristics in Liquefied Petroleum Gas (LPG)-Dimethyl Ether (DME) and Gasoline-DME Homogeneous Charge Compression Ignition Engines Yeom, Kitae; Bae, Choongsik, ENERGY FUELS, v.23 , no.SI, pp.1956 - 1964, 2009 |
| Laminar burning velocity predictions by meso-scale flames in an annular diverging tube Kim, Go Tae; KIM, NAM IL, FUEL, v.90, no.6, pp.2217 - 2223, 2011-06 |
| Mathematical model of thermal processes in an iron ore sintering bed Yang, W; Ryu, C; Choi, Sangmin; Choi, ES; Ri, DW; Huh, W, METALS AND MATERIALS INTERNATIONAL, v.10, no.5, pp.493 - 500, 2004-10 |
| Microscopic Spray Characteristics of Biodiesels Derived From Karanja, Jatropha, and Waste Cooking Oils Patel, Chetankumar; Hwang, Joonsik; Bae, Choongsik; Agarwal, Rashmi A.; Agarwal, Avinash Kumar, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, v.142, no.12, 2020-12 |
| Morphology and nano-structure of soot in diesel spray and in engine exhaust Rohani, Behzad; Bae, Choongsik, FUEL, v.203, pp.47 - 56, 2017-09 |
| Motion of single pulverized coal particles in a hot gas flow field Lee, Hoo Kyung; Choi, Sangmin, COMBUSTION AND FLAME, v.169, pp.63 - 71, 2016-07 |
| Numerical analysis of magnetic effect on human breathing Lee, CH; Lu, SS; Tagawa, T; Ozoe, H; Hyun, Jae Min, JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, v.46, no.2, pp.572 - 582, 2003-06 |
| Numerical simulation of the fuel trapped in the crevice during a pilot injection in a homogeneous charge compression ignition engine Shabgard, Hojjat; Kheradmand, Saeid; Bae, Choongsik, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, v.228, no.12, pp.1415 - 1423, 2014-10 |
| OBSERVATION OF SINGLE COAL PARTICLE FLAMES Choi, Sangmin; SEONG, EH; JAE, SK; JONG, JK, COMBUSTION SCIENCE AND TECHNOLOGY, v.78, no.1-3, pp.117 - 126, 1991 |
| Performance and emission evaluation of a small-bore biodiesel compression-ignition engine Hirner, Felix Sebastian; Hwang, Joonsik; Bae, Choongsik; Patel, Chetankumar; Gupta, Tarun; Agarwal, Avinash Kumar, ENERGY, v.183, pp.971 - 982, 2019-09 |
| Prediction of NO in turbulent diffusion flames using Eulerian particle flamelet model Lee, K. W.; Choi, Do Hyung, COMBUSTION THEORY AND MODELLING, v.12, no.5, pp.905 - 927, 2008 |
| Process simulation of iron ore sintering bed with flue gas recirculation Part 1 - Modelling approach Ahn, H.; Choi, Sangmin; Cho, B., IRONMAKING & STEELMAKING, v.40, no.2, pp.120 - 127, 2013-02 |
| Propagation and quenching of premixed flames in a concentration-length-velocity diagram Jung, Yongjin; Lee, Min-Jung; Kim, Nam Il, PROCEEDINGS OF THE COMBUSTION INSTITUTE, v.36, no.3, pp.4243 - 4251, 2017 |
| Regulated, Unregulated, and Particulate Emissions From Biodiesel Blend Fueled Transportation Engine Patel, Chetankumar; Hwang, Joonsik; Bae, Choongsik; Agarwal, Avinash Kumar, JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, v.143, no.8, 2021-08 |
| Synthesis of ceria nanoparticles by flame electrospray pyrolysis Oh, Hyuncheol; Kim, Sang Soo, JOURNAL OF AEROSOL SCIENCE, v.38, pp.1185 - 1196, 2007-12 |
| The behavior of flame front with heating mechanisms in two entrained-bed coal reactors Cho, HC; Park, JK; Shin, Hyun Dong, FUEL, v.78, no.8, pp.953 - 961, 1999-06 |
| The effect of oxygen enrichment on incipient soot particles in inverse diffusion flames Jung, Yong-Jin; Oh, Kwang-Chul; Bae, Choong-Sik; Shin, Hyun-Dong, FUEL, v.102, pp.199 - 207, 2012-12 |
| The operation characteristics of a liquefied petroleum gas (LPG) spark-ignition free piston engine Kim, Jaeheun; Bae, Choongsik; Kim, Gangchul, FUEL, v.183, pp.304 - 313, 2016-11 |
| The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review Arcounianis, Constantine; Bae, Choongsik; Crookes, Roy; Kinoshita, Eiji, FUEL, v.87, no.7, pp.1014 - 1030, 2008-06 |
| Understanding hydrogen jet dynamics for direct injection hydrogen engines Lee, Sanguk; Hwang, Joonsik; Bae, Choongsik, INTERNATIONAL JOURNAL OF ENGINE RESEARCH, v.24, no.10, pp.4433 - 4444, 2023-10 |
| Unsteady thermal flow analysis in a heat regenerator with spherical particles Park, PM; Cho, HC; Shin, Hyun Dong, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.27, pp.161 - 172, 2003-02 |
| 산업용 고체처리공정 - 입자반응 및 고정층 반응기 모델링 Ahn, Hyungjun; Choi, Sangmin, 한국연소학회지, v.22, no.2, pp.27 - 35, 2017-06 |
Discover
Type
- 12,192 Article
Open Access
- 407 OA Article
Date issued
- 1,610 2020 - 2024
- 3,971 2010 - 2019
- 3,679 2000 - 2009
- 2,269 1990 - 1999
- 600 1980 - 1989