Browse "ME-Journal Papers(저널논문)" by Subject ALUMINUM
Showing results 1 to 43 of 43
| A novel checker-patterned AlN MEMS resonator as gravimetric sensor Heidari, Amir; Yoon, Yong-Jin; Lee, Man I.; Khine, Lynn; Park, Mi Kyoung; Tsai, Julius Ming Lin, SENSORS AND ACTUATORS A-PHYSICAL, v.189, pp.298 - 306, 2013-01 |
| A pressure-sensitive yield criterion under a non-associated flow rule for sheet metal forming Stoughton, Thomas B; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF PLASTICITY, v.20, no.4-5, pp.705 - 731, 2004 |
| A study on the lap shear strength of a co-cured single lap joint Shin, KC; Lee, Jungju; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.14, no.1, pp.123 - 139, 2000 |
| Adhesion characteristics of plasma-surface-treated carbon fiber-epoxy composite with respect to release films used during demolding Kim, JK; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.18, no.4, pp.473 - 494, 2004 |
| Adhesive joining of composite journal bearings to back-up metals Kim, Seong Su; Yu, HN; Lee, Dai Gil, COMPOSITES SCIENCE AND TECHNOLOGY, v.67, no.15-16, pp.3417 - 3424, 2007-12 |
| Anisotropic Thermal Boundary Resistance across 2D Black Phosphorus: Experiment and Atomistic Modeling of Interfacial Energy Transport Li, Man; Kang, Joon Sang; Nguyen, Huu Duy; Wu, Huan; Aoki, Toshihiro; Hu, Yongjie, ADVANCED MATERIALS, v.31, no.33, 2019-08 |
| Bond parameters to improve tensile load bearing capacities of co-cured single and double lap joints with steel and carbon fiber-epoxy composite adherends Shin, KC; Lee, Jungju, JOURNAL OF COMPOSITE MATERIALS, v.37, no.5, pp.401 - 420, 2003 |
| Buckling analysis for an integrally stiffened panel structure with a friction stir weld Yoon, Jeong Whan; Bray, G. H.; Valente, R. A. F.; Childs, T. E. R., THIN-WALLED STRUCTURES, v.47, no.12, pp.1608 - 1622, 2009-12 |
| Characteristics analysis of the developed surface modification technologies to improve the anti-corrosion performances for offshore equipments Oh, Jae-Won; Jung, Jung-Yeul; Song, Kyounghwan; Nam, Youngsuk; Sung, Ki-Young; Oh, Seungtae; Shim, Jaehwan, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.33, no.8, pp.3971 - 3979, 2019-08 |
| Coarse-graining of cohesive zone at interface of amorphous material Park, Jae Shin; Han, Jihoon; Im, Seyoung, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.28, no.7, pp.2787 - 2796, 2014-07 |
| Combinatorial experiments for discovering Al-C thin films with high strength and ductility Oh, Injong; Kim, Hojang; Son, Hansol; Nam, Seungjin; Choi, Hyunjoo; Sim, Gi-Dong, INTERNATIONAL JOURNAL OF PLASTICITY, v.161, 2023-02 |
| Contact angle and wettability of hybrid surface-treated metal adherends Kim, Jin-Gyu; Choi, Il-Beom; Lee, Dai-Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.27, no.7, pp.794 - 810, 2013-04 |
| Correlation of microscopic structures to the strain rate hardening of SPCC steel Huh, Hoon; Yoon, JH; Park, CG; Kang, JS; Huh, MY; Kang, HG, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.52, no.5, pp.745 - 753, 2010-05 |
| Design and manufacture of an automotive hybrid aluminum/composite drive shaft Lee, Dai Gil; Kim, HS; Kim, JW; Kim, JK, COMPOSITE STRUCTURES, v.63, no.1, pp.87 - 99, 2004-01 |
| Effects of bond parameters on fatigue characteristics of a cocured double lap joint subjected to cyclic tensile loads Shin, KC; Lee, Jungju, JOURNAL OF ADHESION, v.79, no.6, pp.581 - 596, 2003-06 |
| Effects of thermal residual stresses on failure of co-cured lap joints with steel and carbon fiber-epoxy composite adherends under static and fatigue tensile loads Shin, KC; Lee, Jungju, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, v.37, no.3, pp.476 - 487, 2006 |
| Endowing antifouling properties on metal substrata by creating an artificial barrier layer based on scalable metal oxide nanostructures Song, Kyounghwan; Shim, Jaehwan; Jung, Jung-Yeul; Lee, Choongyeop; Nam, Youngsuk, BIOFOULING, v.36, no.7, pp.766 - 782, 2020-08 |
| Exponential promotion and suppression of bubble nucleation in carbonated liquid by modification of surface wettability Lee, Jeong-Won; Kim, Seongmin; Lee, Seungchul; Hwang, Woonbong, APPLIED SURFACE SCIENCE, v.512, 2020-05 |
| Fatigue characteristics of a co-cured single lap joint subjected to cyclic tensile loads Shin, KC; Lee, Jungju, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.16, no.4, pp.347 - 359, 2002 |
| Fatigue crack growth behavior of Al7050-T7451 attachment lugs under flight spectrum variation Kim, JH; Lee, Soon-Bok; Hong, SG, THEORETICAL AND APPLIED FRACTURE MECHANICS, v.40, no.2, pp.135 - 144, 2003-09 |
| Finite element analysis of plastic deformation of CP-Ti by multi-pass equal channel angular extrusion at medium hot-working temperature Zhang, ZJ; Son, IH; Im, Yong-Taek; Park, Joong Keun, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.447, no.1-2, pp.134 - 141, 2007-02 |
| Flow characteristics of continuous shear drawing of high carbon steel Hwang, SK; Jin, YG; Son, IH; Rhee, KH; Lee, DL; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.53, no.6, pp.479 - 484, 2011-06 |
| Frictional wear evaluation of WC-Co alloy tool in friction stir spot welding of low carbon steel plates Choi, DH; Lee, CY; Ahn, BW; Choi, JH; Yeon, YM; Song, K; Park, HS; et al, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, v.27, no.6, pp.931 - 936, 2009-11 |
| HIGH SPEED TENSILE TEST OF STEEL SHEETS FOR THE STRESS-STRAIN CURVE AT THE INTERMEDIATE STRAIN RATE Huh, Hoon; Lim, JH; Park, SH, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.10, no.2, pp.195 - 204, 2009-04 |
| Investigation of adhesively bonded joints for composite propeller shafts Kim, JK; Lee, Dai Gil; Cho, DH, JOURNAL OF COMPOSITE MATERIALS, v.35, no.11, pp.999 - 1021, 2001 |
Large-Area Grain-Boundary-Free Copper Films for Plasmonics Chew, Soo Hoon; Gliserin, Alexander; Choi, Sungho; Geng, Xiao Tao; KIM, Sujae; Hwang, Wooseup; Baek, Kangkyun; et al, APPLIED SURFACE SCIENCE, v.521, pp.146377, 2020-08 |
| Mechanical Robustness of Metal Nanocomposites Rendered by Graphene Functionalization Zhao, Lei; Lee, Taegu; Ryu, Seunghwa; Oshima, Yoshifumi; Guo, Qiang; Zhang, Di, NANO LETTERS, v.21, no.13, pp.5706 - 5713, 2021-07 |
| Mesoscopic Modeling of Primary Recrystallization of AA1050 with Curvature-Driven Interface Migration Effect Kim, Dong-Kyu; Lee, Ho Won; Jung, Kyung-Hwan; Im, Yong-Taek, MATERIALS TRANSACTIONS, v.54, no.1, pp.81 - 89, 2013-01 |
| Metal thin film ablation with femtosecond pulsed laser Kim, J; Na, Suck-Joo, OPTICS AND LASER TECHNOLOGY, v.39, pp.1443 - 1448, 2007-10 |
| Modeling the Effect of Asymmetric Rolling on Mechanical Properties of Al-Mg Alloys de Almeida Gracio, Jose Joaquim; Vincze, Gabriela; Yoon, Jeong Whan; Ramos Cardoso, Rui Pedro; Rauch, Edgar Fernand; Barlat, Frederic Gerard, STEEL RESEARCH INTERNATIONAL, v.86, no.8, pp.922 - 931, 2015-08 |
| Novel applications of composite structures to robots, machine tools and automobiles Lee, Dai Gil; Lee, CS; Lee, HG; Hwang, HY; Kim, JW, COMPOSITE STRUCTURES, v.66, no.1-4, pp.17 - 39, 2004-10 |
| On the existence of indeterminate solutions to the equations of motion under non-associated flow Stoughton, Thomas B.; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF PLASTICITY, v.24, no.4, pp.583 - 613, 2008 |
| Optimum design of co-cured steel-composite tubular single lap joints under axial load Cho, DH; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.14, no.7, pp.939 - 963, 2000 |
| Prediction of the tensile load capability of co-cured steel-composite tubular single lap joints considering thermal degradation Lee, Dai Gil; Cho, DH, JOURNAL OF COMPOSITE MATERIALS, v.34, no.8, pp.689 - 722, 2000 |
| Review of Drucker's postulate and the issue of plastic stability in metal forming Stoughton, Thomas B; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF PLASTICITY, v.22, no.3, pp.391 - 433, 2006 |
| Self-Heating-Induced Deterioration of Electromechanical Performance in Polymer-Supported Metal Films for Flexible Electronics Jang, Dong-Won; Lee, Jeong-Hwan; Kim, Ansoon; Lee, Soon-Bok; Hong, Seong-Gu, SCIENTIFIC REPORTS, v.7, 2017-10 |
| Simulation of earing behaviors in bake hardening steel exhibiting a strong off-gamma-fiber component Kim, Eun-Young; Choi, Shi-Hoon; Shin, Eun-Joo; Yoon, JeongWhan, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.49, no.25, pp.3573 - 3581, 2012-12 |
| Superstrength through Nanotwinning An, Qi; Goddard, William A., III; Xie, Kelvin Y.; Sim, Gi-dong; Hemker, Kevin J.; Munhollon, Tyler; Toksoy, M. Fatih; et al, NANO LETTERS, v.16, no.12, pp.7573 - 7579, 2016-12 |
| Tensile load-bearing capacity of co-cured double lap joints Shin, KC; Lee, Jungju, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.14, no.12, pp.1539 - 1556, 2000 |
| Tension/compression hardening behaviors of auto-body steel sheets at intermediate strain rates Joo, Geunsu; Huh, Hoon; Choi, Min Kuk, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.108, pp.174 - 187, 2016-04 |
| The effect of microstructure and texture evolution on mechanical properties of low carbon steel in a non-circular drawing sequence Hwang, Sun Kwang; Baek, Hyun Moo; Lee, Jung Wan; Son, Il-Heon; Im, Yong-Taek; Bae, Chul Min, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.214, no.2, pp.318 - 325, 2014-02 |
| The manufacturing process of co-cured single and double lap joints and evaluation of the load-bearing capacities of co-cured joints Shin, KC; Lim, JO; Lee, Jungju, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.138, no.1, pp.89 - 96, 2003-07 |
| Three-dimensional crystal plasticity finite element analysis of microstructure and texture evolution during channel die compression of IF steel Kim, Dong-Kyu; Kim, Jaemin; Park, Wonwoong; Lee, Ho Won; Im, Yong-Taek; Lee, Yong-Shin, COMPUTATIONAL MATERIALS SCIENCE, v.100, pp.52 - 60, 2015-04 |
Discover
Type
- 12,297 Article
Open Access
- 407 OA Article
Date issued
- 1,712 2020 - 2024
- 3,974 2010 - 2019
- 3,679 2000 - 2009
- 2,269 1990 - 1999
- 600 1980 - 1989