1 | A channel layout of a micro pulsating heat pipe for an excessively localized heating condition Lim, Jonghyun; Kim, Sung Jin, APPLIED THERMAL ENGINEERING, v.196, 2021-09 |
2 | A deep-learning approach for predicting oscillating motion of liquid slugs in a closed-loop pulsating heat pipe Yoon, Aejung; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.181, 2021-12 |
3 | A mechanistic model for nucleate pool boiling including the effect of bubble coalescence on area fractions Kim, Minchang; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.163, pp.120453, 2020-12 |
4 | A mechanistic model of critical heat flux for pool boiling based on supply failure mechanisms depending on the contact angle Kim, Minchang; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.209, 2023-08 |
5 | Analysis of the electroviscous effects on pressure-driven flow in nanochannels using effective ionic concentrations Kim, Sung Il; Kim, Sung Jin, MICROFLUIDICS AND NANOFLUIDICS, v.22, no.1, 2018-01 |
6 | Analytic approach to thermal optimization of horizontally oriented radial plate-fin heat sinks in natural convection Kwon, Hyeokmin; Joo, Younghwan; Kim, Sung Jin, ENERGY CONVERSION AND MANAGEMENT, v.156, pp.555 - 567, 2018-01 |
7 | Analytic solutions of the friction factor and the Nusselt number for the low-Reynolds number flow between two wavy plate fins Yu, Dahm; Jeon, Wonju; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.115, pp.307 - 316, 2017-12 |
8 | Analytic study on pressure drop and heat transfer characteristics for low reynolds number flow in spirally finned tubes Yu, Dahm; Jeon, Wonju; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.158, 2020-09 |
9 | Comparison of the thermal performances and flow characteristics between closed-loop and closed-end micro pulsating heat pipes Jun, Soohwan; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.95, pp.890 - 901, 2016-04 |
10 | Conjugate heat transfer by oscillating flow in a parallel-plate channel subject to a sinusoidal wall temperature distribution Jo, Jaeyeong; Kim, Sung Jin, APPLIED THERMAL ENGINEERING, v.123, pp.1462 - 1472, 2017-08 |
11 | Development of a helium flow sensor based on dielectric barrier discharge at atmospheric pressure Kim, Tae Hoon; Kim, Sung Jin, SENSORS AND ACTUATORS A-PHYSICAL, v.167, pp.297 - 303, 2011-06 |
12 | Effect of a channel layout on the thermal performance of a flat plate micro pulsating heat pipe under the local heating condition Lim, Jonghyun; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.137, pp.1232 - 1240, 2019-07 |
13 | Effect of initial cooling on heat and mass transfer at the cryogenic surface under natural convective condition Choi, Sangho; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.112, pp.850 - 861, 2017-09 |
14 | Effect of reentrant cavities on the thermal performance of a pulsating heat pipe Kim, Woo Kyoung; Kim, Sung Jin, APPLIED THERMAL ENGINEERING, v.133, pp.61 - 69, 2018-03 |
15 | Effects of oscillation amplitudes on heat transfer mechanisms of pulsating heat pipes Jung, Chuljae; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.165, pp.120642, 2021-02 |
16 | Effects of the micro-post array on the maximum allowable input power for a micro pulsating heat pipe Lee, Young Jong; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.193, 2022-09 |
17 | Effects of the number of turns and the inclination angle on the operating limit of micro pulsating heat pipes Lee, Jungseok; Joo, Younghwan; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.124, pp.1172 - 1180, 2018-09 |
18 | Efficient three-dimensional topology optimization of heat sinks in natural convection using the shape-dependent convection model Joo, Younghwan; Lee, Ikjin; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.127, pp.32 - 40, 2018-12 |
19 | Experimental and theoretical studies on oscillation frequencies of liquid slugs in micro pulsating heat pipes Yoon, Aejung; Kim, Sung Jin, ENERGY CONVERSION AND MANAGEMENT, v.181, pp.48 - 58, 2019-02 |
20 | Experimental investigation on the effect of the condenser length on the thermal performance of a micro pulsating heat pipe Kim, Juno; Kim, Sung Jin, APPLIED THERMAL ENGINEERING, v.130, pp.439 - 448, 2018-02 |
21 | Experimental investigation on the effect of transverse grooves in a channel on the thermal performance of a flat-plate pulsating heat pipe Lee, Young Jong; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.218, 2024-01 |
22 | Experimental investigation on the thermodynamic state of vapor plugs in pulsating heat pipes Jun, Soohwan; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.134, pp.321 - 328, 2019-05 |
23 | Experimental investigations of heat transfer mechanisms of a pulsating heat pipe Jo, Jaeyeong; Kim, Jungho; Kim, Sung Jin, ENERGY CONVERSION AND MANAGEMENT, v.181, pp.331 - 341, 2019-02 |
24 | Experimental study on a criterion for normal operation of pulsating heat pipes in a horizontal orientation Jun, Soohwan; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.137, pp.1064 - 1075, 2019-07 |
25 | Fundamental Issues and Technical Problems About Pulsating Heat Pipes Kim, Wookyoung; Kim, Sung Jin, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, v.143, no.10, 2021-10 |
26 | Investigation into the effect of transverse condudction on the thermal performance of a flat-plate pulsating heat pipe Noh, Hyung Yun; Yoon, Aejung; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.181, 2021-12 |
27 | Investigation into the effects of passive check valves on the thermal performance of pulsating heat pipes Jung, Chuljae; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.204, 2023-05 |
28 | Observations of the Critical Heat Flux Process During Pool Boiling of FC-72 Jung, Jaehoon; Kim, Sung Jin; Kim, Jungho, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, v.136, no.4, 2014-04 |
29 | On the Objective Function for Topology Optimization of Heat Sinks Lee, Gilho; Joo, Younghwan; Kim, Sung Jin, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.11, no.11, pp.1776 - 1782, 2021-11 |
30 | Thermal characterization and optimization of pulsating heat pipes operating in a circulation mode Noh, Hyung Yun; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.115, pp.1234 - 1246, 2017-12 |
31 | Thermal optimization of radial plate fin heat sinks under an L-shaped flow Lee, Gilho; Kim, Sung Jin, APPLIED THERMAL ENGINEERING, v.133, pp.580 - 587, 2018-03 |
32 | Thermal optimization of the pin-fin heat sink with variable fin density cooled by natural convection Lee, Young Jin; Kim, Sung Jin, APPLIED THERMAL ENGINEERING, v.190, 2021-05 |
33 | Thermal optimization of vertically oriented, internally finned tubes in natural convection Joo, Younghwan; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.93, pp.991 - 999, 2016-02 |
34 | Topology optimization of a heat sink with an axially uniform cross-section cooled by forced convection Lee, Gilho; Lee, Ikjin; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.168, pp.120732, 2021-04 |
35 | Understanding of the thermo-hydrodynamic coupling in a micro pulsating heat pipe Yoon, Aejung; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.127, pp.1004 - 1013, 2018-12 |