DC Field | Value | Language |
---|---|---|
dc.contributor.author | 오준호 | ko |
dc.contributor.author | 정충영 | ko |
dc.date.accessioned | 2013-02-24T11:09:32Z | - |
dc.date.available | 2013-02-24T11:09:32Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1988-01 | - |
dc.identifier.citation | 대한기계학회논문집 A, v.12, no.5, pp.206 - 214 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/56723 | - |
dc.description.abstract | To improve the surface waviness in the peripheral milling, the feedrate is controlled so that the cutting force measured in the normal direction to the workpiece is constant. A discrete time first order model between the feedrate and the tool deflection is derived for the control. It has been shown by the analysis that the tool deflection is directly related to the feedrate and largely affects the surface waviness during cutting. The experimental results shown that the surface waviness is drastically improved by the proposed methods. | - |
dc.language | Korean | - |
dc.publisher | 대한기계학회 | - |
dc.title | 밀링머신의 절삭력 제어를 통한 표면굴곡도 향상에 관한 연구 | - |
dc.title.alternative | A Study on the Improvement of Surface Waviness by Cutting Force Control | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 12 | - |
dc.citation.issue | 5 | - |
dc.citation.beginningpage | 206 | - |
dc.citation.endingpage | 214 | - |
dc.citation.publicationname | 대한기계학회논문집 A | - |
dc.contributor.localauthor | 오준호 | - |
dc.contributor.nonIdAuthor | 정충영 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.