Browse "MS-Theses_Ph.D.(박사논문) " by Subject Creep

Showing results 1 to 7 of 7

1
Advanced 9-12% Cr 강의 크리프 파단강도에 미치는 합금원소의 영향 = Effects of alloying elements on the creep rupture strength of advanced 9-12% Cr steelslink

류석현; Ryu, Seog-Hyeon; et al, 한국과학기술원, 1998

2
Lamellar 구조 TiAl합금의 primary 크리프 변형기구에 대한 연구 = A study on the primary creep deformation mechanism of the lamellar TiAl alloyslink

조한서; Cho, Han-Seo; et al, 한국과학기술원, 1999

3
SiC/2124Al 금속복합재료의 제조공정과 고온 Creep 특성 = Fabrication process and high temperature creep behavior of SiC/2124Al metal matrix compositelink

정경현; Chung, Kyung-Hyun; et al, 한국과학기술원, 1996

4
Ti-1100 및 IMI834 합금에서 최적 크리프-피로 특성을 위한 최적의 미세조직 제어에 관한 연구 = A study on the microstructural control for the optimum creep-fatigue characteristics in the Ti-1100 and IMI834 alloyslink

이덕희; Lee, Duck-Hee; et al, 한국과학기술원, 2000

5
TiAl계 금속간화합물의 고온변형특성과 가공열처리에 의한 미세조직제어 = High temperature deformation behavior and microstructure control by thermomechanical treatment of the TiAl-base intermetallic compoundslink

김희영; Kim, Hee-Young; et al, 한국과학기술원, 1998

6
무연솔더의 크리프에 미세구조와 솔더볼 형상이 미치는 영향에 관한 연구 = Effects of microstructure and solder ball geometry on creep deformation of lead-free solderlink

김성범; Kim, Sung-Bum; et al, 한국과학기술원, 2011

7
스퍼터링으로 증착된 (NiFe)-Ag 및 Fe-Ag 미세입상합금 박막의 증착 특성, 미세 구조 및 거대자기저항 현상에 관한 연구 = Study on the deposition characteristic, microstructures and ginat-magnetoresistance of (NiFe)-Ag and Fe-Ag granular thin films prepared by DC magnetron sputteringlink

오태석; Oh, Tae-Seok; et al, 한국과학기술원, 1999

rss_1.0 rss_2.0 atom_1.0