Browse "MS-Theses_Ph.D.(박사논문) " by Author 이혁모

Showing results 29 to 34 of 34

29
무연 및 저연 Sn 계 솔더의 열역학적 합금설계 및 특성평가 = Thermodynamics-aided alloy design and evaluation of Pb-free and low Pb-bearing Sn solder alloy systemslink

윤승욱; Yoon, Seung-Wook; et al, 한국과학기술원, 1998

30
에피택시 구조의 하부강자성전극을 갖는 자기터널접합의 특성 = Properties of magnetic tunnel junctions with epitaxial ferromagnetic bottom electrodeslink

유지형; Yu, Ji-Hyung; et al, 한국과학기술원, 2004

31
전자부품 실장용 Sn-Ag-X 계 솔더 합금의 계면 현상과 특성 평가 = Interfacial phenomena and characterization of Sn-Ag-based solder alloy systems for electronic packaginglink

최원경; Choi, Won-Kyoung; et al, 한국과학기술원, 2001

32
전자패키지용 Sn-Ag-Cu계 무연 솔더 접합부의 금속간 화합물 성장과 전단강도에 미치는 냉각속도의 영향 = Effect of cooling rate on growth of IMC and shear strength of near eutectic Sn-Ag-Cu solder jointlink

정상원; Jeong, Sang-Won; et al, 한국과학기술원, 2004

33
전자패키징용 복합 솔더에서 Cu/Ni 비율에 따른 금속간 화합물의 형성과 특성 평가에 관한 연구 = A Study of the effect of the Cu/Ni ratio on formation of intermetallic compounds and evaluation of reliability in the Cu-Ni-bearing composite solderslink

이주원; Lee, Joo-Won; et al, 한국과학기술원, 2006

34
클러스터 변분법을 이용한 열역학 고찰과 상태도 계산 및 응용에 관한 연구 = On thermodynamic analysis and phase diagram calculation using cluster variation method and its applicationlink

서정룡; Soh, Jeong-Ryong; et al, 한국과학기술원, 1998

rss_1.0 rss_2.0 atom_1.0