Browse "MS-Theses_Ph.D.(박사논문) " by Type Thesis(Ph.D)

Showing results 141 to 160 of 1344

141
(A) transmission electron microscopy study on the crystallization of low pressure chemical vapor deposition amorphous silicon thin films = 저압화학증착된 비정질 실리콘 박막의 결정화에 관한 투과전자현미경 연구link

Kim, Jin-Hyeok; 김진혁; et al, 한국과학기술원, 1996

142
$AB_5$, $AB_2$ 형 금속간화합물의 수소 흡수-방출 싸이클링에 의한 intrinsic degradation에 관한 연구 = A study on the intrinsic degradation of $AB_5$, $AB_2$ type intermetallic compounds upon hydrogen absorption-desorption cyclinglink

안효준; Ahn, Hyo-Jun; et al, 한국과학기술원, 1991

143
Acoustic Emission 기법에 의한 (Pb,La)$TiO_3$ 강유전체 세라믹스의 광여기 분역 반전에 관한 연구 = Study on photoinduced domain switching in (Pb,La)$TiO_3$ ferroelectric ceramics by acoustic emission techniquelink

최동구; Choi, Dong-Gu; et al, 한국과학기술원, 1999

144
Advanced 9-12% Cr 강의 크리프 파단강도에 미치는 합금원소의 영향 = Effects of alloying elements on the creep rupture strength of advanced 9-12% Cr steelslink

류석현; Ryu, Seog-Hyeon; et al, 한국과학기술원, 1998

145
Ag, Ag-Sn, Ag-Sn-Cu 계의 아말감반응에 관한 연구 = A study on the amalgamation reaction un Ag, Ag-Sn, andAg-Sn-Cu systemlink

이규환; Lee, Kyu-Hwan; 이재영; 신명철; et al, 한국과학기술원, 1986

146
Ag, Cu) 삼원계 단결정에서 강화기구에 관한 연구 = Al-Li-X(Xlink

이병찬; Lee, Byeong-Chan; et al, 한국과학기술원, 1997

147
Ag-Pd-In 합금의 미세구조 및 기계적 성질에 미치는 첨가원소의 영향 = The effects of addition elements on the microstructures and mechanical properties of Ag-Pd-In alloyslink

서용찬; Suh, Yong-Chan; et al, 한국과학기술원, 1998

148
AIAI 304 및 304L 스테인리스강의 입계 석출물이 크립-피로 상호작용에 미치는 영향 = Effects of grain boundary ppt on creep-fatigue interaction in AISI 304 and 304L stainless steellink

이제민; Lee, Je-Min; et al, 한국과학기술원, 1991

149
AISI 304L 스탠레스 상의고온 저주파 피로시험시 피로 거동에 미치는 동적 변형 시효의 영향 = The effects of dynamic strain ageing on the low-cycle fatigue behaviors at high temperature for the AISI 304L stainless steellink

김동제; Kim, Dong-Jee; et al, 한국과학기술원, 1988

150
AISI 316 스테인리스강에서 발생하는 입계 serration에 영향을 미치는 인자 고찰 및 발생 기구 규명 = An investigation of the factors affecting the occurrence of the grain boundary serration and the grain boundary serration mechanism in AISI 316 stainless steellink

김기재; Kim, Ki-Jae; et al, 한국과학기술원, 2004

151
AISI 321 스테인리스강의 입계 탄화물 석출 기구 규명 및 크리프-피로 특성 향상에 관한 연구 = An investigation of the precipitation mechanism of grain boundary carbides and the improvement of the creep-fatigue properties in AISI 321 stainless steellink

민경선; Min, Kyung-Seon; et al, 한국과학기술원, 2003

152
Al - Li - Cu(- Mg) 합금의 석출 현상과 강화 기구에 관한 연구 = Study of the precipitation behavior and strengthening mechanisms in Al - Li - Cu(- Mg) alloyslink

정우상; Jung, Woo-Sang; et al, 한국과학기술원, 1992

153
Al - Zn 합금의 불연속 석출에 미치는 연속 석출및 제3원소의 영향 = The effects of continuous precipitation and third elementon the kinetics of discontinuous precipitation in Al - Zn alloyslink

이호기; Yi, Ho-Gi; et al, 한국과학기술원, 1992

154
Al 하지막이 자기 기록용 CoCr(Pt)Ta/Cr 박막의 자기적 특성과 미세 구조에 미치는 영향에 관한 연구 = Study on the effect of an Al underlayer on the magnetic and microstructural properties of CoCr(Pt)Ta/Cr thin films for magnetic recording medialink

장한성; Chang, Han-Sung; et al, 한국과학기술원, 1998

155
Al-Fe-V-Si/SiC 복합재료의 크??거동을 주관하는 전위 detachment의 온도의존성 = Temperature dependence of the dislocation detachment controlled creep behavior of an Al-Fe-V-Si/SiC compositelink

김인수; Kim, In-Soo; et al, 한국과학기술원, 1995

156
Al-Li-Cu-Mg(-Ag)합금의 석출현상과 δ'상의 강화기구에 관한 연구 = Study of the precipitation behaviors and of the strengthening mechanism of δ' phase in Al-Li-Cu-Mg(-Ag) alloyslink

김제덕; Kim, Je-Deok; et al, 한국과학기술원, 1993

157
Al-Mg 고용체 합금에서 고온 반복크리ㅍ시 응력진폭이 입계변형거동에 미치는 영향에 관한 연구 = A study of effect of stress amplitude on the grain boundary deformation behavior during high temperature cyclic creep in an Al-Mg solid solution alloylink

나상호; Na, Sang-Ho; et al, 한국과학기술원, 1995

158
Al-Mg 고용체 합금에서 고온 정적 및 반복응력 크립 변형시 발생되는 입계 변형 및 입계파괴 거동에 관한 연구 = An investigation of the grain boundary deformation and intergranular fracture during high temperature static and cyclic creep in an Al-Mg solid solution alloylink

이동헌; Lee, Dong-Heon; et al, 한국과학기술원, 1991

159
Al-Zn-Mg 계 합금에서 Mn-Dispersoid 가 기계적 변형에 미치는 영향과 무석출물대가 저주기 피로특성에 미치는 영향 = Effects of Mn-dispersoid on the deformation mechanism and precipitate free zone on the low cycle fatigue of and Al-Zn-Mg alloylink

박동석; Park, Dong-Seok; et al, 한국과학기술원, 1991

160
Al-Zn-Mg 합금에서 응력부식파괴와 부식피로의 기구와 속도론에 대한 연구 = A study on the mechanism and kinetics of stress-corrosion cracking and corrsion-fatigueprodesses of Al-Zn-Mg alloyslink

김홍표; Kim, Hong-Pyo; et al, 한국과학기술원, 1988

rss_1.0 rss_2.0 atom_1.0