(A) study on implementation of dynamic safety system in programmable logic controller for pressurized water reactor

Abstract

The dynamic safety system (DSS) is a computer based reactor protection system that has dynamic self-testing feature and fail-safe nature inherently. The inherent dynamic self-testing feature and fail-safe design provide a high level of reliability and low spurious trip rate. We can also reduce the time and human efforts to maintain the system by virtue of those features. Therefore, the application of the DSS to PWR has many advantages. The DSS has been applied only to advanced gas-cooled reactor (AGR) in the UK. In order to apply the DSS for PWR, the DSS has to be modified because there exist many differences between PWR and AGR for which the DSS was tested and installed. These differences are trip algorithms, monitored parameters, trip logics, and other conditions. In this study, the DSS algorithm is modified for PWR first. The modified DSS has several new features : 1) The modified DSS tests and processes time-dependent parameters, while the original DSS does not. 2) It has flexibility for handling several types of voting logic but the original DSS handles the only one type of voting - 2 out of 4 coincidence logic. Then, in this study, the modified DSS is implemented in programmable logic controller (PLC) using the ladder logic. Finally, the modified DSS is tested in two ways in this work : 1) The manual test is performed using direct input through the human computer interface (HCI) system. 2) The scenario based test is performed using input from the FISA-2/WS simulator. From the test results, it is shown that the modified DSS operates correctly in all conditions.