Development of a fixed Langmuir probe system for newly installed tungsten monoblock lower divertors in KSTAR

Abstract

A fixed Langmuir probe system for newly installed tungsten monoblock lower divertors in KSTAR is developed. The probe structure is designed to effectively cooled via divertor coolant using inclined contact surfaces between the probe components. The probe body is tapered, narrowing up towards the divertor surface to enhance thermal contact conductance through mechanical forces exerted by the probe-divertor assembly. The probe structure is designed for easy replacement of a probe tip in the event of its damage and to accommodate different shapes of the tip. Currently, all the installed probe tips have 16 degrees of inclination, i.e., one-sided rooftop shape, with respect to the surrounding divertor surface protruding 1.0 mm from the divertor surface. An individual probe system occupies two mono-blocks along the direction of the coolant channel. A single divertor cassette can accommodate 52 probes having a nominal poloidal spatial resolution of 12 mm. In the newly installed KSTAR divertor system, a total of 104 probes are installed at two toroidal locations. Thermal analysis on the probe structure indicates that the one-sided rooftop-shaped probe tips can withstand a localized heat flux of 10 MW/m(2) for 2 s and 5 MW/m(2) for steady-state operation. Experiments with a probe-divertor mockup are conducted in a linear plasma device under a magnetic field (|B|<360 G) and steady-state plasmas of a density of the order of 10(11) cm(-3). Possible analysis models for the I-V characteristics are discussed with practical applications to the measured data from KSTAR.