3121 | 저가의 머신 비전 카메라를 이용한 2차원 미소 진동 측정 = Measurement of two-dimensional, small-amplitude vbration using the low-end machine vision cameralink 김서우; Kim, Seowu; et al, 한국과학기술원, 2015 |
3122 | 저감적분 탄소성 유한요소해석에 의한 평면변형문제에서의 응력계산 = Stress evaluation in plane strain problems by elasto-plastic finite element analysis with reduced integrationlink 김세호; Kim, Se-Ho; et al, 한국과학기술원, 1995 |
3123 | 저강성 저감쇄계의 정밀 위치 제어 = Precision position control of a low stiffness and low damping mechanismlink 이창우; Lee, Chang-Woo; et al, 한국과학기술원, 1992 |
3124 | 저누유 저마찰 회전형 유압 구동기 개발 = Design of low leakage and low friction hydraulic rotary actuatorlink 신승훈; 오준호; et al, 한국과학기술원, 2019 |
3125 | 저부하에서 Dimethyl Ether 압축착화 엔진연소 특성 = Compression ignition combustion of dimethyl ether in a single cylinder engine at low load conditionslink 백철우; Baek, Cheul-Woo; 배충식; 신현동; et al, 한국과학기술원, 2006 |
3126 | 저속 저부하에서 연료 분사기 분공수 증가가 디젤 엔진 성능에 미치는 영향 = The effect of increased hole number of injector at low speed and load in a diesel enginelink 이승원; Lee, Seung-Won; et al, 한국과학기술원, 2005 |
3127 | 저어널 베어링에서의 Toms 효과에 관한 연구 = A study on Toms effect in journal bearingslink 이득우; Lee, Deug-Woo; et al, 한국과학기술원, 1985 |
3128 | 저어널 베어링에서의 와류 영역에 대한 실험적 연구 = An experimental study on the vortex flow regime in a journal bearinglink 정연민; Cheong, Yeon-Min; et al, 한국과학기술원, 1984 |
3129 | 저어널 베어링의 온도 특성에 관한 연구 = A study on temperature characteristics of plain journal bearingslink 서태설; Seo, Tae-Sul; et al, 한국과학기술원, 1986 |
3130 | 저어널 베어링의 정특성 및 동특성에 미치는 급유 조건의 영향 = The effects of oil supply conditions on the static and dynamic characteristics of plain journal bearingslink 정경민; Jeong, Kyung-Min; et al, 한국과학기술원, 1990 |
3131 | 저어널 베어링의 좀머펠트 수 변화에 따른 마모 특성에 관한 연구 = A study on wear properties of journal bearings with sommerfeld number variationlink 김철우; Kim, Cheol-Woo; et al, 한국과학기술원, 1997 |
3132 | 저어널 베어링의 회전정밀도에 미치는 형상오차의 영향에 관한 연구 = A study on the effect of errors of form of journal bearings on the running accuracylink 노병후; Rho, Byoung-Hoo; et al, 한국과학기술원, 1991 |
3133 | 저어널베어링의 압력 및 온도분포에 관한 실험적 연구 = An experimental study on the pressure and temperature distribution in a plain journal bearinglink 신영재; Shin, Young-Jae; et al, 한국과학기술원, 1987 |
3134 | 저온 압축기를 이용한 맥동관 냉동기의 설계와 실험적 검증 = Design and experimental investigation on pulse tube refrigerator using cold compressorlink 김보금; 정상권; et al, 한국과학기술원, 2020 |
3135 | 저온 액조의 온도제어를 위한 디지탈 제어기의 설계에 관한 연구 = Design of a digital temperature controller for the liquid containerlink 오기태; Oh, Ki-Tae; et al, 한국과학기술원, 1985 |
3136 | 저온공정에 기반한 고전도 고안정 은 나노와이어 투명전극 제작에 관한 연구 = A study on fabrication of ag nanowire transparent electrode at low temperature for high conductivity and stabilitylink 백승아; Back, Seung-A; et al, 한국과학기술원, 2014 |
3137 | 저온디젤연소를 적용한 병렬형 하이브리드 전기자동차의 주행 전략 최적화 = Optimization of control strategy of parallel diesel HEV with low temperature diesel combustionlink 김준호; Kim, Jun-Ho; et al, 한국과학기술원, 2009 |
3138 | 저온영역에서 초미립자의 열영동현상에 관한 연구 = Thermophoresis in cryogenic temperature rangelink 이병욱; Lee, Byung-Uk; et al, 한국과학기술원, 1999 |
3139 | 저주파 범위에서 인체 머리부 6 자유도 운동 측정에 관한 연구 = A study on measurement of 6 degree of freedom head motion in low frequency rangelink 이정훈; Lee, Jeung-Hoon; et al, 한국과학기술원, 2002 |
3140 | 저주파수 배기소음 저감을 위한 차량 배기계의 최적화 = Optimization of the car exhaust system for the reduction of the low-frequency discharge noiselink 최충영; Choi, Choong-Young; et al, 한국과학기술원, 2009 |
3141 | 저주파수 영역 응용을 위한 배열형 공명기 패널의 흡음 특성 = Absorption characteristics of resonator array panel for low frequency applicationslink 김명섭; Kim, Myeong-Sub; 김양한; 김광준; et al, 한국과학기술원, 2003 |
3142 | 저주파에서 방사되는 음향 파워의 최대화를 위한 접힌 혼의 형상 최적 설계 = Optimal shape design of the folded horn for maximizing the radiated sound power at low frequencieslink 임형준; 이정권; Ih, Jeong Guon; 장인권; et al, 한국과학기술원, 2017 |
3143 | 저항 용접을 이용한 금속 샌드위치 패널 접합에 관한 연구 = A study on the resistance joining of metallic sandwich panellink 이상민; Lee, Sang-Min; et al, 한국과학기술원, 2005 |
3144 | 저항 점 용접 공정에서 shunt전류 간접 측정에 관한 연구 = A study on the measurement of shunt current in resistance spot welding processlink 김영선; Kim, Young-Sun; et al, 한국과학기술원, 1993 |
3145 | 저항 점 용접 공정에서 품질향상을 위한 가압력 제어 = Force control for the improvement of weld qualities in resistance spot welding processlink 박지환; Park, Jie-Hwan; et al, 한국과학기술원, 1999 |
3146 | 저항 점 용접과정에서 마이크로프로세서를 이용한 제어 시스템 = A microprocessor-based control system for resistance spot welding processlink 원윤재; Won, Yun-Jae; et al, 한국과학기술원, 1983 |
3147 | 저항 점 용접에서 shunt effect 에 관한 연구 = A study on the shunt effect in resistance spot weldinglink 연제세; Yeon, Jae-Sae; 나석주; 조형석; et al, 한국과학기술원, 1986 |
3148 | 저항 점 용접에서 용융부의 성장에 관한 단순화된 모델 = A simplified model of the nugget growth in the resistance spot weldinglink 부광석; Boo, Kwang-Sug; 조형석; 나석주; et al, 한국과학기술원, 1985 |
3149 | 저항 점 용접에서 용접물의 온도분포와 전위장 형성에 관한 연구 = A study on thermal behavior and voltage potential field formation of weldment in resistance spot weldinglink 김재웅; Kim, Jae-Woong; et al, 한국과학기술원, 1984 |
3150 | 저항 점 용접에서의 전극 변형 현상에 관한 연구 = The electrode wear phenomenon in resistance spot weldinglink 이철규; Lee, Cheol-Gyou; et al, 한국과학기술원, 1985 |
3151 | 저항 점(点) 용접에서 용접 변수가 용접질에 미치는 영향 = Effects of welding process variables on qualities of resistance spot weldinglink 송기남; Song, Kee-Nam; et al, 한국과학기술원, 1982 |
3152 | 저항 점용접에서 Adhesive가 존재 할 때에 용접공정에 관한 연구 = A study on resistance spot welding process with adhesivelink 박상운; Park, Sang-Woon; et al, 한국과학기술원, 2000 |
3153 | 저항 점용접에서 용접변수가 용접전극 분리현상에 미치는 영향 = Effects of welding parameters on electrode separation in resistance spot weldinglink 오병철; Oh, Byung-Cheol; et al, 한국과학기술원, 1982 |
3154 | 저항점 용접과정에서 다이나믹리지턴스 제어에의 마이크로컴퓨터의 응용 = Microcomputer application to the control of dynamic resistance during resistance spot welding processlink 장희석; Chang, Hee-Seok; et al, 한국과학기술원, 1982 |
3155 | 적대적 가중 손실 함수를 이용한 반 지도학습 세그멘테이션과 지하 공동구에서의 구조적 변화 측정을 위한 방법 = Semi-supervised semantic segmentation with adversarial weighted loss and methods for measuring structural change in underground utility tunnelslink 서은교; 김수현; Kim, Soohyun; 김경수; et al, 한국과학기술원, 2020 |
3156 | 적분형 강건성 기준과 극미세 전자 기계 시스템 구조물 강건 최적 설계에의 응용 = An integral form robustness measure and its application to optimal robust design of MEMS structureslink 정재우; Jeong, Jae-Woo; et al, 한국과학기술원, 2003 |
3157 | 적외선 광학계의 수동형 자동초점법을 이용한 굴절율 변화 보상 = Compensation for the refractive index change of IR optic systems by passive autofocusinglink 정문식; Jeong, Moon-Sik; et al, 한국과학기술원, 1997 |
3158 | 적외선 온도센서를 이용한 GMA용접 품질 모니터링에 관한 연구 = A study on the monitoring of weld quality using IR temperature sensor in GMA welding processlink 김병만; Kim, Byung-Man; 조형석; 양동열; et al, 한국과학기술원, 1996 |
3159 | 적외선 카메라를 이용한 마이크로 디바이스 온도 분포 측정 = Measurement of the temperature distribution of a microdevice using an infrared cameralink 남정민; 이봉재; et al, 한국과학기술원, 2023 |
3160 | 적응 가변형 동흡진기 = Adaptively tunable dynamic absorberlink 김태현; Kim, Tae-Hyun; et al, 한국과학기술원, 2001 |
3161 | 적응 구성형 캠 가공 시스템의 개발에 관한 연구 = A study on the development of the reconfigurable machining system for various types of camslink 허인국; Heo, In-Guk; et al, 한국과학기술원, 2000 |
3162 | 적응 모델 추종 제어기를 이용한 일정 선속도제어의 개선에 관한 연구 = A study of improvement of constant linear velocity control using adaptive model following controllerlink 손동수; Son, Dong-Soo; et al, 한국과학기술원, 1996 |
3163 | 적응광학 시스템의 파면 측정 알고리즘 개발 및 전산모사를 이용한 성능 검증 = The development of new centroid finding algorithm for a SHWFS and performance verification using AO simulationlink 유재은; Yoo, Jae-Eun; et al, 한국과학기술원, 2008 |
3164 | 적응광학계 변형거울의 구동기 최적 배열에 관한 연구 = A study on the optimal actuator array of a deformable mirror for adaptive opticslink 엄태경; Uhm, Tae-Kyoung; et al, 한국과학기술원, 2002 |
3165 | 적응다변형모델을 이용한 가공경로 생성에 관한 연구 = A study on the toolpath generation using adaptive polygon modellink 이언수; Lee, Un-Su; et al, 한국과학기술원, 1996 |
3166 | 적응제어기법을 이용한 1자유도 현가장치의 능동 진동 제어 = Active vibration control of a single D.O.F. suspension system using an adaptive filterlink 박기효; Park, Kee-Hyo; et al, 한국과학기술원, 1992 |
3167 | 적층 그래핀과 하이퍼볼릭 메타물질을 이용한 열광전지의 성능 향상 = Enhancement of thermophotovoltaic system by using multilayered graphene and hyperbolic metamateriallink 김지훈; 이봉재; et al, 한국과학기술원, 2017 |
3168 | 적층 오일팬의 소음 및 진동 특성 해석 = Noise and vibration analysis of laminated oil panlink 우상우; Woo, Sang-Woo; et al, 한국과학기술원, 1990 |
3169 | 전 군속도 분산값 양성 광섬유 레이저를 통한 고안정, 및 초정밀 펨토초 광원 개발 = Filtered all normal dispersion fiber laser as a robust, and low noise femtosecond sourcelink 신준호; Shin, Junho; et al, 한국과학기술원, 2015 |
3170 | 전-광 샘플링 기반 타이밍 검출기를 이용한 절대 거리 측정 = Absolute distance measurement using electro-optic sampling-based timing detectorlink 안창민; 김정원; et al, 한국과학기술원, 2021 |
3171 | 전·후륜 브레이크 마찰계수 개별 추정 및 승차감 향상을 위한 제동 제어 = Individual estimation of front and rear brake friction coefficients, and braking control for improving ride comfortlink 이종협; 최세범; et al, 한국과학기술원, 2017 |
3172 | 전개하는 유연보의 횡방향 진동 해석에 관한 연구 = Transverse vibration analysis of a deploying flexible beamlink 김상현; Kim, Sang-Hyeon; et al, 한국과학기술원, 1992 |
3173 | 전광섬유 펨토초 어븀 레이저 = All-fiber femtosecond Erbium laserlink 김도현; Kim, Dohyun; et al, 한국과학기술원, 2016 |
3174 | 전극 분리현상을 모니터링 파라미터로 하는 제어시스템 = On line feedback control of electrode movement for resistance spot weldinglink 전동휘; Chun, Dong-Whee; et al, 한국과학기술원, 1984 |
3175 | 전기 유압식 서어보 인덱싱 시스템의 위치 제어및 관성 부하 시뮬레이터에 관한 연구 = A study on the position control of electrohydraulic servo indexing system and inertia load simulatorlink 안경관; Ahn, Kyoung-Kwan; et al, 한국과학기술원, 1992 |
3176 | 전기 유압식 서어보 인덱싱 시스템의 적응제어에 관한 연구 = A study on the adaptive control of electro-hydraulic servo indexing systemlink 홍성철; Hong, Seong-Cheol; et al, 한국과학기술원, 1991 |
3177 | 전기 접촉저항과 접촉부의 전류밀도분포에 대한 기계적 접촉조건의 영향에 관한 연구 = A study on the influence of mechanical contact condition on contact resistance and current density distribution in the electrical contact arealink 박수웅; Park, Soo-Woong; et al, 한국과학기술원, 1987 |
3178 | 전기 조향 장치를 위한 조향휠 개발 = Development of steering wheel for steer by wire systemlink 정인용; Jung, In-Yong; et al, 한국과학기술원, 2001 |
3179 | 전기 화학 반응을 고려한 고체 산화물 연료 전지의 성능 해석 = The analysis of heat and fluid flow in solid oxide fuel cell with electrochemical reactionlink 김영진; Kim, Young-Jin; et al, 한국과학기술원, 2005 |
3180 | 전기 화학 반응을 포함한 3차원 열·유동 해석을 이용한 용융탄산염 연료전지의 성능예측 = Prediction of MCFC performance using three dimensional heat and fluid flow analysis with electrochemical reactionlink 조황묵; Cho, Hwang-Mook; et al, 한국과학기술원, 2003 |