Characterization of Pb(Zr, Ti)O-3 thin films fabricated by plasma enhanced chemical vapor deposition on Ir-based electrodes

Abstract

Structural and electrical characteristics of Pb(Zr, Ti)O-3 (PZT) ferroelectric thin films deposited on various Ir-based electrodes (Ir, IrO2, and Pt/IrO2,) using electron cyclotron resonance plasma enhanced chemical vapor deposition were investigated. On the Ir electrode, stoichiometric PZT films with pure perovskite phase could be obtained over a very wide range of processing conditions. However, PZT films prepared on the IrO2 electrode contain a large amount of PbOx phases and exhibited high Pb-excess composition. The deposition characteristics were dependent on the behavior of PbO molecules on the electrode surface. The PZT thin film capacitors prepared on the Ir bottom electrode showed different electrical properties depending on top electrode materials. The PZT capacitors with Ir, IrO2, and Pt top electrodes showed good leakage current characteristics, whereas those with the Ru top electrode showed a very high leakage current density. The PZT capacitor exhibited the best fatigue endurance with an IrO2 top electrode. An Ir top electrode provided better fatigue endurance than a Pt top electrode. The PZT capacitor with an Ir-based electrode is thought to be attractive for the application to ferroelectric random access memory devices because of its wide processing window for a high-quality ferroelectric film and good polarization, fatigue, and leakage current characteristics. (C) 2002 American Vacuum Society.