Polyethylene terephthalate (PET) was depolymerized to monomer bis(2-hydroxyethyl) terephthalate (BHET) using excess ethylene glycol (EG) in the presence of metal oxides that were impregnated on different forms of silica support [silica nanoparticles (SNPs) or silica microparticles (SMPs)] as glycolysis catalysts. The reactions were carried out at 300 degrees C and 1.1 MPa at an EG-to-PET molar ratio of 11:1 and a catalyst-to-PET-weight ratio of 1.0% for 40-80 min. Among the four prepared catalysts (Mn(3)O(4)/SNP5, ZnO/SNPs, Mn(3)O(4)/SMPs, and ZnO/SMPs), the Mn(3)O(4)/SNPs nanocomposite had the highest monomer yield (>90%). This high yield may be explained by the high surface area, amorphous and porous structure, and existence of numerous active sites on the nanocomposite catalyst. The BHET yield increased with time and reached the highest level where equilibrium was established between BHET and its dimer. The catalysts were characterized by their SEM, TEM, and BET surface areas, and via XRD, whereas the monomer BHET was characterized by HPLC and FT-IR. The glycolysis with the Mn(3)O(4)/SNPs nanocomposite as the glycolysis catalyst produced a maximum BHET in a short reaction time.