DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김홍석 | ko |
dc.contributor.author | 주은덕 | ko |
dc.contributor.author | 임용택 | ko |
dc.contributor.author | 이성호 | ko |
dc.contributor.author | 이종수 | ko |
dc.date.accessioned | 2011-03-24T05:23:54Z | - |
dc.date.available | 2011-03-24T05:23:54Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1993-01 | - |
dc.identifier.citation | 소성가공, v.2, no.3, pp.27 - 36 | - |
dc.identifier.issn | 1225-696X | - |
dc.identifier.uri | http://hdl.handle.net/10203/22982 | - |
dc.description.abstract | Forging experiments for axi-symmetric cup-type of AISI4130 have been made using physical modeling in the present study. Because of limit of the machine capacity available in industry, the heavy-forging product cannot be formed by one blow. Thus, forging process has been divided into several stages, The process design becomes the most important procedure for this case. In order to reduce die manufacturing cost, physical modeling technique using plasticine and lead was adopted in checking the forging process to make defect-free product. The forging load was predicted by slab analysis for its convenience. Comparison of the predicted loads by the slab analysis and the experimentation shows good agreement. The process design of cup-type heavy forging products was successfully achieved by combining physical modeling and slab analysis in the present investigation. As a result, it was found out that slab analysis and physical modeling are the appropriate and practical approach for process design in small forging industry. | - |
dc.language | Korean | - |
dc.language.iso | ko | en |
dc.publisher | 한국소성가공학회 | - |
dc.title | 모델실험을 이용한 컵형 대형단조품 단조에 관한 실험적 연구 | - |
dc.type | Article | - |
dc.subject.alternative | Process Design | en |
dc.subject.alternative | Slab Analysis | en |
dc.subject.alternative | Physical Modeling | en |
dc.type.rims | ART | - |
dc.citation.volume | 2 | - |
dc.citation.issue | 3 | - |
dc.citation.beginningpage | 27 | - |
dc.citation.endingpage | 36 | - |
dc.citation.publicationname | 소성가공 | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | 임용택 | - |
dc.contributor.nonIdAuthor | 김홍석 | - |
dc.contributor.nonIdAuthor | 주은덕 | - |
dc.contributor.nonIdAuthor | 이성호 | - |
dc.contributor.nonIdAuthor | 이종수 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.