DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, Ha Eun | ko |
dc.contributor.author | Chung, Yong Sik | ko |
dc.contributor.author | Kim, Seong Su | ko |
dc.date.accessioned | 2017-10-23T01:54:28Z | - |
dc.date.available | 2017-10-23T01:54:28Z | - |
dc.date.created | 2017-10-10 | - |
dc.date.created | 2017-10-10 | - |
dc.date.issued | 2017-11 | - |
dc.identifier.citation | COMPOSITE STRUCTURES, v.180, pp.378 - 385 | - |
dc.identifier.issn | 0263-8223 | - |
dc.identifier.uri | http://hdl.handle.net/10203/226384 | - |
dc.description.abstract | Polymer electrolyte membrane fuel cells ( PEMFCs) have high efficiency, a low operating temperature, and nearly zero environmental emissions. The bipolar plate is one of the main components of the PEMFC because it accounts for a large part of the weight, volume, and cost. Recently, carbon-fiber-reinforced thermoplastic composite bipolar plates for PEMFCs have attracted interest owing to their simple fabrication method, high flexibility, excellent corrosion resistance, and damage resistance. The efficiency of PEMFCs depends primarily on the performance of the bipolar plates; however, composite bipolar plates have a high surface electrical contact resistance because of their resin-rich area. In this study, carbon felt was used to fabricate bipolar plates for PEMFCs. In addition, a solution impregnation method and the double percolation effect on the electrical conduction were introduced to improve the impregnation state of the thermoplastic polymer and the electrical conductivity of the composite plates simultaneously. The area specific resistance, double percolation morphology, and impregnation state of the composite plates were analyzed using the four-point probe method, transmission electron microscopy analysis, and scanning electron microscopy analysis, respectively. The results of the experiments were compared with the United States Department of Energy's technical targets for bipolar plates. (C) 2017 Elsevier Ltd. All rights reserved. | - |
dc.language | English | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.subject | FIBER EPOXY COMPOSITE | - |
dc.subject | LAMINATE SKIN LAYER | - |
dc.subject | MEMBRANE FUEL-CELLS | - |
dc.subject | BLACK | - |
dc.title | Feasibility study on carbon-felt-reinforced thermoplastic composite materials for PEMFC bipolar plates | - |
dc.type | Article | - |
dc.identifier.wosid | 000410632800029 | - |
dc.identifier.scopusid | 2-s2.0-85028770443 | - |
dc.type.rims | ART | - |
dc.citation.volume | 180 | - |
dc.citation.beginningpage | 378 | - |
dc.citation.endingpage | 385 | - |
dc.citation.publicationname | COMPOSITE STRUCTURES | - |
dc.identifier.doi | 10.1016/j.compstruct.2017.08.037 | - |
dc.contributor.localauthor | Kim, Seong Su | - |
dc.contributor.nonIdAuthor | Lee, Ha Eun | - |
dc.contributor.nonIdAuthor | Chung, Yong Sik | - |
dc.description.isOpenAccess | N | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | Bipolar plates | - |
dc.subject.keywordAuthor | Carbon felt | - |
dc.subject.keywordAuthor | Thermoplastic composite | - |
dc.subject.keywordAuthor | Double percolation effect | - |
dc.subject.keywordAuthor | Sol gel | - |
dc.subject.keywordAuthor | Polymer electrolyte membrane fuel cells (PEMFCs) | - |
dc.subject.keywordPlus | FIBER EPOXY COMPOSITE | - |
dc.subject.keywordPlus | LAMINATE SKIN LAYER | - |
dc.subject.keywordPlus | MEMBRANE FUEL-CELLS | - |
dc.subject.keywordPlus | BLACK | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.