A 19-mW 2.6-mm(2) L1/L2 dual-band CMOS GPS receiver

Abstract

This paper presents the design and implementation of an L1/L2 dual-band global positioning system (GPS) receiver. Dual-conversion with a low-IF architecture was used for dual-band operation. The receiver is composed of an RF pream-plifier, down-conversion mixers, a variable-gain channel filter, a 2-bit analog-to-digital converter, and the full phase-locked-loop synthesizer including an on-chip voltage controlled oscillator. Fabricated in a 0.18-mu m CMOS technology, the receiver exhibits maximum gain of 95 dB and noise figures of 8.5 and 7.5 dB for L1 and L2, respectively. An on-chip variable-gain channel filter provides IF image rejection of 20 dB and gain control range over 60 dB. The receiver consumes 19 mW from a 1.8-V supply while occupying a 2.6-mm(2) die area including the ESD I/O pads.