Dynamic strain aging studied at the atomic scale

Abstract

Dynamic strain aging arises from the interaction between solute atoms and matrix dislocations in strained metallic alloy. It initiates jerky dislocation motion and abrupt softening, causing negative strain rate sensitivity. This effect leads to instable flow phenomena at the macroscopic scale, appearing as a serrated stress-strain response and deformation banding. These macroscopic features are referred to as the Portevin-Le Chateher effect (PLC). Here we study the atomistic origin of dynamic strain aging in an Al-4.8 at.% Mg alloy using atom probe tomography (APT) and transmission electron microscopy (TEM). Samples were prepared from as-cold rolled (90% thickness reduction), stabilized (120 degrees C, 20 h) and recrystallized sheets (400 degrees C, 10 min), respectively. In the stabilized state, Mg was found to decorate <1 10> aligned dislocations with up to similar to 12.5 at.%. Tensile tests in combination with thermographic and laser speckle observations were used to map the deformation bands for the site-specific extraction of APT samples from regions inside the PLC bands. We observed an asymmetrical Mg distribution along some of the dislocations, matching model predictions for high dislocation speeds at peak drag stress by Zhang and Curtin. In this case, the Mg distribution is characterized by depletion in the compressive regime above the dislocation slip plane and enrichment in the dilatation region below the slip plane. Mg also depletes in a tail-like form behind fast-moving dislocations, further promoting slip localization. (C) 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved