Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Author Ih, Jeong-Guon

Showing results 395 to 454 of 581

395
The Acoustic Characteristics of Cylindrical Chamber Silencers

Ih, Jeong-Guon, Inter-Noise 2003, pp.0 - 0, 2003-08-01

396
The acoustic impedance of a circular orifice in grazing mean flow: Comparison with theory

Peat, KS; Ih, Jeong-Guon; Lee, SH, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.114, no.6, pp.3076 - 3086, 2003-12

397
The acoustic performance measurement of silencers in reflective field

Ih, Jeong-Guon; Lee, SH; Choi, WY, Spring Meeting of the KSNVE, 2005

398
THE REACTIVE ATTENUATION OF RECTANGULAR PLENUM CHAMBERS

Ih, Jeong-Guon, JOURNAL OF SOUND AND VIBRATION, v.157, no.1, pp.93 - 122, 1992-08

399
The Selection of Measurement Positions for BEM-Based NAH Using a Non-Conforal Hologram to Reduce The Reconstruction Error

Ih, Jeong-Guon, KSNVE, 2007-11-15

400
The use of partially measured source data in near-field acoustical holography based on the BEM

Kang, SC; Ih, Jeong-Guon, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.107, no.5, pp.2472 - 2479, 2000-05

401
Theoretical analysis of higher order mode sound distribution with uniform mean flow in expansion chamber mufflers

Ih, Jeong-Guon; Lee, BH, 2nd Japan-Korea Symposium on Acoustics, pp.173 - 178, 1983

402
Theoretical analysis of higher order mode sound distribution with uniform mean flow in expansion chamber mufflers

Ih, Jeong-Guon; Lee, BH, ASK Meeting, pp.14 - 19, 1984

403
THEORETICAL PREDICTION OF THE TRANSMISSION LOSS OF CIRCULAR REVERSING CHAMBER MUFFLERS

Ih, Jeong-Guon; LEE, BH, JOURNAL OF SOUND AND VIBRATION, v.112, no.2, pp.261 - 272, 1987-01

404
Theoretical prediction of transmission loss for expansion chamber type mufflers with arbitrarily shaped geometries

Ih, Jeong-Guon; Lee, BH, ASK Meeting, pp.11 - 14, 1984

405
Three-dimensional acoustic analysis of lined rectangular ducts and plenum chambers = 흡음형 덕트 및 상자의 3차원 음향 해석link

Kim, Hoi-Jeon; 김회전; et al, 한국과학기술원, 2006

406
Transfer matrix of curved duct bends and sound attenuation in curved expansion chambers

Kim, JT; Ih, Jeong-Guon, APPLIED ACOUSTICS, v.56, no.4, pp.297 - 309, 1999-04

407
Traveling-wave control of the bending wave in a beam for high quality sound radiation

Lee, Ki-Ho; Ih, Jeong-Guon; Jung, Donghyun, Inter-Noise 2021, The International Institute of Noise Control Engineering, 2021-08-04

408
Use of Additional Scattering Bodies in the NAH

Ih, Jeong-Guon, Inter-Noise 2003, pp.0 - 0, 2003-08

409
Use of an Additional Scattering Body in the NAH Based on the Inverse BEM

Kim, SI; Jeong, JH; Ih, Jeong-Guon, ICSV, pp.0 - 0, 2002-07

410
Use of nonsingular boundary integral formulation for reducing errors due to near-field measurements in the boundary element method based near-field acoustic holography

Kang, SC; Ih, Jeong-Guon, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.109, no.4, pp.1320 - 1328, 2001-04

411
Use of rigid reflectors for the virtual increase of field data in the near-field acoustical holography

Kim, SI; Ih, Jeong-Guon; Jeong, JH, v.15, no.1, pp.49 - 61, 2007

412
Use of rigid reflectors for the virtual increase of field data in the near-field acoustical holography

Kim, Sung-Il; Ih, Jeong-Guon; Jeong, Ji-Hoon, JOURNAL OF COMPUTATIONAL ACOUSTICS, v.15, no.1, pp.49 - 61, 2007-03

413
Use of Spherical Radiation Function for Data Interpolation in the Conformal BEM-based NAH

Ih, Jeong-Guon, ASK, pp.0 - 0, 2010-06-04

414
Use of the Normalized Design Parameters for Designing a Strip Speaker Operated by the Traveling-Wave Control Method

Lee, Ki-Ho; Ih, Jeong-Guon, IEEE ACCESS, v.10, pp.22941 - 22951, 2022-03

415
Use of the Ray Tracing Method for Predicting the Vibration Energy Distribution in Two-Dimensional Structures at High Frequencies

Ih, Jeong-Guon, NOVEM, pp.0 - 0, 2000-08

416
Verfahren zur optimalen Bestimmung von Sensorpositionen für Schallpyrometrie

Ih, Jeong-Guon; Park, Chul Min

417
Vibration field rendering for a poin-excited, rectangular panel speaker

Lee, KiHo; Ih, Jeong-Guon, Inter-Noise 2018, INCE, 2018-08-29

418
Vibration field rendering for a point-excited rectangular panel speaker

Lee, KiHo; Ih, Jeong-Guon, 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering, INTER-NOISE 2018, Institute of Noise Control Engineering, 2018-08

419
Vibration rendering for generating double radiators and baffle on a plate

Woo, Jung-Han; Ih, Jeong-Guon, NOVEM 2018, La Salle, Universitat Ramon Llull, 2018-05-08

420
Vibration rendering on a thin plate by actuator array on the boundary

Woo, JH; Ih, Jeong-Guon, INTERNOISE 2014, InterNoise, 2014-11-17

421
Vibration rendering on a thin plate with actuator array at the periphery

Woo, Jung-Han; Ih, Jeong-Guon, JOURNAL OF SOUND AND VIBRATION, v.349, no.4, pp.150 - 162, 2015-08

422
Vibration transmission through a junction connecting periodically stiffened thin plates = 주기적으로 강화된 얇은 판을 연결하는 접합부에의 진동 전파link

Jeon, Jisu; Ih, Jeong-Guon; et al, 한국과학기술원, 2018

423
Vibrational power flow in the moving belt passing through a tensioner

Kwon, YI; Ih, Jeong-Guon, JOURNAL OF SOUND AND VIBRATION, v.229, no.2, pp.329 - 353, 2000-01

424
Vibro-acoustic rendering methods to radiate a uniform sound field from a panel speaker

Woo, Jung-Han; Ih, Jeong-Guon, The 23rd International Congress on Acoustics, International Commission for Acoustics (ICA), 2019-09-12

425
Vibro-Acoustic Source Characterization of the Tub in a Washing Machine

Ih, Jeong-Guon; Heo, Yong-Ho; Agustinus Oey; Hong, Kyung-Seop, the Noise-Con 2013, the Noise-Con, 2013-08-26

426
Vibro-Acoustic Source Identification by Using Statist-ical Energy Analysis

Ih, Jeong-Guon, 94 Sprin Annual Meeting of KSME, pp.537 - 540, 1994

427
Virtual Formation of a Woofer at the Roof Panel of a Vehicle by Using Array Actuators

Woo, Jung-Han; Kim, Da-Young; Ih, Jeong-Guon, SAE INTERNATIONAL JOURNAL OF PASSENGER CARS - MECHANICAL SYSTEMS, v.9, no.3, pp.1086 - 1090, 2016-06

428
Virtual Formation of a Woofer at the Roof Panel of a Vehicle by Using Array Actuators

Woo, Jung-Han; Kim, Da-Young; Ih, Jeong-Guon, SAE INTERNATIONAL JOURNAL OF PASSENGER CARS - MECHANICAL SYSTEMS, v.9, no.3, 2016

429
Virtual Herschel-Quincke tube using the multiple small resonators and acoustic metamaterials

Kim, Da-Young; Ih, Jeong-Guon; Abom, Mats, JOURNAL OF SOUND AND VIBRATION, v.466, pp.115045, 2020-02

430
Viscothermal Transmission Loss of Monolithic Catalytic Converters

Ih, Jeong-Guon; Kim, HJ, 3rd Int'l Congress on Air and Structure-borne Sound and Vibration, pp.685 - 692, 1994

431
Visocthermal transmission Loss of Monolithic Catalytic Converters

Ih, Jeong-Guon, Proc. of the 3rd Inter. Congress on Air- and Structure, pp.685 - 692, 1994

432
Visualization of Transient Response of Acoustic Source Field Using the BEM-Based NAH

Ih, Jeong-Guon, ICSV15, pp.0 - 0, 2008-07

433
Visualization of Transient Wave Fields Using BEM-based NAH and Fourier Analysis

Ih, Jeong-Guon, ASK, 2009-05

434
Wave Propagation in Swaged panel

Ih, Jeong-Guon; Lee, JH, KSNVE-Spring, pp.253 - 256, 1996

435
Wave Propagation in Swaged panels

Ih, Jeong-Guon; Lee, JH, Inter Noise 96 Conference, pp.1459 - 1462, 1996

436
Wave transmission and vibration response in periodically stiffened plates using a free wave approach

Jeon, Jisu; Ih, Jeong-Guon; Brunskog, Jonas, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.149, no.6, pp.3694 - 3702, 2021-06

437
Wave Vector Filtering for the Regularization in Using the Near-Field Acoustic Holography

Ih, Jeong-Guon; Kim, BK, Inter Noise 98 Conference, 1998

438
Wideband reduction of in-duct noise using acoustic metamaterial with serially connected resonators made with MPP and cavities

Kim, Da-Young; Ih, Jeong-Guon, APPLIED PHYSICS LETTERS, v.116, no.25, 2020-06

439
가진기 어레이를 이용한 판구조물에서의 가상 스피커 형성

Woo, Junghan; Ih, Jeong-Guon, 2016 한국음향학회 추계학술발표대회, 한국음향학회, 2016-11-03

440
간접 경계요소법을 이용한 연결된 공간의 음향해석 = Analysis of acoustic coupling between connected cavities using indirect boun dary element methodlink

정지훈; Jeong, Ji-Hoon; et al, 한국과학기술원, 1996

441
경계 요소법을 이용한 3차원 능동 소음 제어의 최적화에 대한 연구 = A study on the optimal active noisecontrol for three-dimensional space by using BEMlink

권오상; Kwon, Oh-Sang; et al, 한국과학기술원, 1993

442
고효율, 저공해 에너지 이용 차량의 음질 이슈

Ih, Jeong-Guon, 2014년도 춘계 소음진동 학술대회, 한국소음진동공학회, 2014-04-25

443
곡관부를 포함하는 반사형 음향 요소계에 관한 연구 = A study on the reactive acoustic elements including curved ductslink

김준태; Kim, Jun-Tai; et al, 한국과학기술원, 1998

444
공기 청정기의 음질 평가 모델에 관한 연구 = A study on the sound quality evaluation model for an air cleanerlink

장수원; Jang, Su-Won; et al, 한국과학기술원, 2007

445
공동주택의 바닥에서 발생하는 중량 충격 소음의 예측 = Prediction of the heavy-weight floor impact noise in the multiple dwellingslink

박수호; Park, Su-Ho; et al, 한국과학기술원, 2009

446
공회전 시 저소음화를 위한 자동차 배기계 위치 결정

Ih, Jeong-Guon, KSNVE, pp.0 - 0, 2009-10-29

447
과도 음향 신호의 음질 해석 = Sound quality analysis of nonstationary acoustic signalslink

정혁; Jeong, Hyuk; et al, 한국과학기술원, 1999

448
국소 진동장 형성에 의한 얇은 평판에서의 촉감 구현 = Generation of localized vibration on a thin plate for haptic sensationlink

우정한; Woo, Jung-Han; et al, 한국과학기술원, 2014

449
국악 음원의 음향 방사 특성에 관한 연구

Ih, Jeong-Guon, ASK, pp.0 - 0, 2003-07

450
근접장 음향 부상에 있어서 피부양체의 거동에 대한 실험적 고찰

Ih, Jeong-Guon, ASK, pp.0 - 0, 2003-07

451
근접장 음향부상에 관한 연구 = A study on the near-field acoustic levitationlink

고영갑; Ko, Young-Kap; et al, 한국과학기술원, 2003

452
노면과 타이어의 접촉부 충격력을 고려한 패턴 소음 예측에 관한 연구 = A study on the prediction of tire pattern noise considering the impact force at contact edgeslink

김은배; Kim, Eun-Bae; et al, 한국과학기술원, 2002

453
다공질형 흡/차음재료의 음향 물성치 측정 및 흡음율 예측 = Measurement of acoustic parameters and prediction of absorption coefficient of porous soundproofing materialslink

김정태; Kim, Jeong-Tae; et al, 한국과학기술원, 1997

454
다이코틱 조건에서의 라우드니스 모델에 관한 연구

Ih, Jeong-Guon, KSNVE, pp.0 - 0, 2003-05

rss_1.0 rss_2.0 atom_1.0