| 184 | Fan noise reduction by using periodic resonator array Heo, Yong-Ho; Yim, Eun-Ok; Ih, Jeong-Guon, ICSV19, ICSV, 2012-07-09 |
| 185 | Filtered-x LMS 알고리즘을 응용한 덕트내 전파 소음의 능동 제어 = Active noise control in a duct using filtered -x LMS algorithmlink 우재학; Woo, Jae-Hak; et al, 한국과학기술원, 1992 |
| 186 | Generation of a Virtual Speaker and Baffle on a Thin Plate Controlled by an Actuator Array at the Boundary Woo, Junghan; Ih, Jeong-Guon, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.24, no.3, pp.1197 - 1207, 2019-06 |
| 187 | Handling of Uncertainties in Inverse Rendering of Sound Field Cho, Wan-Ho; Ih, Jeong-Guon; Takeshi, Toi, Inter-Noise 2012, InterNoise, 2012-08-20 |
| 188 | Harmonic balance method for estimating the nonlinear parameters of electrodynamic direct-radiator loudspeakers Jeong, H; Ih, Jeong-Guon, JOURNAL OF THE AUDIO ENGINEERING SOCIETY, v.44, no.4, pp.245 - 257, 1996-04 |
| 189 | HiFi panel speaker by controlling the vibration field using array actuators Lee, KiHo; Ih, Jeong-Guon, The 23rd International Congress on Acoustics, International Commission for Acoustics (ICA), 2019-09-12 |
| 190 | High Frequency Vibration Analysis of Beams and Plates by Using the Ray Tracing Method Chae, KS; Ih, Jeong-Guon; Jeon, JJ, ASK, pp.83 - 88, 1997 |
| 191 | High frequency vibration analysis of beams and plates using ray tracing method = 레이추적기법을 이용한 보와 평판의 고주파수 진동 해석link Chae, Ki-Sang; 채기상; et al, 한국과학기술원, 2000 |
| 192 | High Frequency Vibration Analysis of Curved Beam Structures by Using the Ray Tracing Method Ih, Jeong-Guon, RASD, pp.0 - 0, 2003-07 |
| 193 | High frequency vibration analysis of single curved beam using the ray tracing method Ih, Jeong-Guon; Jeong, CH, 한국소음진동공학회 추계학술대회, pp.90 - 95, 2001 |
| 194 | High Frequency vibration in Structures: Comparison of SEA, Energy, Conduction, Ray Tracing Models Ih, Jeong-Guon; Chae, KS; Jeon, JJ, Inter Noise 97 Conference, pp.647 - 650, 1997 |
| 195 | Holographic Design of a Source Array Achieving a Desired Sound Field Wan-Ho, C.; Ih, Jeong-Guon; Boone, M.M., JOURNAL OF THE AUDIO ENGINEERING SOCIETY, v.58, no.4, pp.282 - 298, 2010 |
| 196 | Holographic design of a source array for achieving a desired sound field Ih, Jeong-Guon, AES, pp.0 - 0, 2008-05 |
| 197 | Holographic Reconstruction in the Interior Space Using the Boundary Element Method Ih, Jeong-Guon; Kim, BK, 3rd Joint Meeting : Acoustical Society of America and Japan(132nd ASA Meeting), pp.2654 - 2654, 1996 |
| 198 | Holographic Reconstruction of the Vibro-Acoustic Field of an Engine Using the Inverse BEM and Equivalent Sources Ih, Jeong-Guon, ICSV13, pp.0 - 0, 2006-07 |
| 199 | Holographoc Imaging of Surface Vibro-Acoustic Field in Interior/Exterior Acoustic Problems Ih, Jeong-Guon; Kim, BK; Kang, SC, Visualization and Auralization for Acoustic Research and Education (ASVA 97), pp.715 - 722, 1997 |
| 200 | Identification of a rotating sound source in a duct with high spatial resolution Heo, Yong-Ho; Ih, Jeong-Guon; Bodén, Hans, 10th European Congress and Exposition on Noise Control Engineering, Euronoise 2015, pp.2273 - 2278, DC/ConfOrg, 2015-06 |
| 201 | Identification of a rotating sound source using the acoustical holography based on inverse BEM Ih, Jeong-Guon; Agustinus, Oey, ICSV19, ICSV, 2012-07-09 |
| 202 | Identification of a Rotating Source Using the NAH Based On the BEM Ih, Jeong-Guon, ICSV17, pp.0, 123, 2010-07-01 |
| 203 | Identification of rotating sound source in a duct with high spatial resolution Heo, Yong-Ho; Ih, Jeong-Guon; Hans Boden, Euro Noise 2015, The Belgian Acoustical Association (ABAV) and Acoustical Society of the Netherlands (NAG), 2015-06-03 |
| 204 | Identification of Vibration Transmission through Belt-Pulley Systems by Using the Structural Intensity Method Ih, Jeong-Guon; Kwon, YI, Inter Noise 98 Conference, 1998 |
| 205 | Identification of Vibro-Acoustic Sources in the Highly Reverberant Field Using the Inverse Frequency Response Function Jeon, IY; Ih, Jeong-Guon; Kim, J, 한국음향학회 하계학술회의, pp.281 - 284, 1999 |
| 206 | Impedance tube measurements of sound absorbing materials: sensitivity analysis on backing conditions Lee, JH; Ih, Jeong-Guon; Park, BH; Kim, BH, 한국소음진동공학회 추계학술대회, pp.888 - 891, 한국소음진동공학회, 2001 |
| 207 | Implementation of a new algorithm using the STFT with variable frequency resolution for the time-frequency auditory model Jeong, H; Ih, Jeong-Guon, JOURNAL OF THE AUDIO ENGINEERING SOCIETY, v.47, no.4, pp.240 - 251, 1999-04 |
| 208 | Implementation of SVD and Its Vibro-acoustic Meanings in the Near-field Acoustical Holography Based on the Inverse BEM Ih, Jeong-Guon, Korea-Japan Symposium of Frontiers in Vibration Science and Technology, pp.0 - 0, 2001-08 |
| 209 | Implementation of the uniform theory of diffraction in the phased beam tracing method Ih, Jeong-Guon, ICSV14, pp.0 - 0, 2007-07 |
| 210 | Implication of geometric factors of simple expansion chambers for their acoustic performance Ih, Jeong-Guon; Lee, BH, International Noise and Vibration Control Conference (Noise '93), pp.155 - 160, 1993 |
| 211 | Implications and treatment of wave vectors in using the array-based inverse vibro-acoustic methods for solving the acoustic radiation problems Ih, Jeong-Guon, The 28th Japan Modal Analysis Conference, JMAC, 2011-09-08 |
| 212 | Improved identification of sound sources at low frequencies using the two-step steepest descent method based on the equivalent source method Jiang, Laixu; Zou, Guangping; Ih, Jeong-Guon, 24th International Congress on Acoustics, ICA 2022, International Commission for Acoustics (ICA), 2022-10 |
| 213 | Improvement of Reconstruction Accuracy by Using the Nonsingular BEM in the near-field acoustical holography based on the inverse BEM Ih, Jeong-Guon, International Conference on Theoretical and Computational Acoustics, pp.0 - 0, 2001-08 |
| 214 | Improvement of Reconstruction Accuracy in BEM-based Near-field Acoustic Holography by Using Partially Measured Surface Data Ih, Jeong-Guon; Kang, SC, International Congress on Sound and Vibration, pp.837 - 842, 1999 |
| 215 | In-duct Acoustic Source Model Considering Flow Characteristics at Orifice and Valve Inside Fluid Machinery Ih, Jeong-Guon; Kim, Tae-Kyoon, 154th ASA Meeting, 2007 |
| 216 | In-duct identification of a rotating sound source with high spatial resolution Heo, Yong-Ho; Ih, Jeong-Guon; Boden, Hans, JOURNAL OF SOUND AND VIBRATION, v.357, pp.51 - 73, 2015-11 |
| 217 | In-duct identification of fluid-borne source with high spatial resolution Heo, Yongho; Ih, Jeong-Guon; Boden, Hans, JOURNAL OF SOUND AND VIBRATION, v.333, no.23, pp.6074 - 6089, 2014-11 |
| 218 | In-duct source identification of a blower using the near-field measurement Heo, YH; Ih, Jeong-Guon; H. Boden, ICSV21, International Institute of Acoustics and Vibration, 2014-07-15 |
| 219 | Independent positioning of actuators in the acoustic inverse design problems Ih, Jeong-Guon; Cho, Wan-Ho, ICSV19, ICSV, 2012-07-09 |
| 220 | Influence of impedance phase angle on sound pressures and reverberation times in a rectangular room Jeong, Cheol-Ho; Lee, Doheon; Santurette, Sebastien; Ih, Jeong-Guon, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.135, no.2, pp.712 - 723, 2014-02 |
| 221 | Inherent background coefficients for acoustic resonance scattering from submerged, multilayered, cylindrical structures Joo, YS; Ih, Jeong-Guon; Choi, MS, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.103, no.2, pp.900 - 910, 1998-02 |
| 222 | INSITU ESTIMATION OF AN ACOUSTIC SOURCE IN AN ENCLOSURE AND PREDICTION OF INTERIOR NOISE BY USING THE PRINCIPLE OF VIBROACOUSTIC RECIPROCITY KIM, BK; Ih, Jeong-Guon, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.93, no.5, pp.2726 - 2731, 1993-05 |
| 223 | Instability of FDTD due to Transformed Boundary Condition Ih, Jeong-Guon, ASK, pp.0 - 0, 2010-06-04 |
| 224 | Introduction and applications of phased mean tracing method: Can the low frequency response be interpreted by the particle property? Ih, Jeong-Guon, ICA2007, pp.0 - 0, 2007-09-01 |
| 225 | Inverse Acoustical Measurement of the Sectional Area in Nonuniform Ducts Ih, Jeong-Guon, ICSV, pp.0 - 0, 2001-07 |
| 226 | Inverse design of the modular source array system Cho, WH; Ih, Jeong-Guon, 2008 International Conference on Control, Automation and Systems, ICCAS 2008, pp.232 - 235, 2008-10-14 |
| 227 | Inverse estimation of sectional gas temperature in a duct having multiple temperature peaks Ih, Jeong-Guon; Kim, Tae Kyoon, INTER-NOISE 2015, The Institute of Noise Control Engineering/USA (INCE/USA) and Korean Society of Noise & Vibration Control (KSNVE), 2015-08-10 |
| 228 | Inverse estimation of the acoustic impedance of a porous woven hose from measured transmission coefficients Park, CM; Ih, Jeong-Guon; Nakayama, Y; Takao, H, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.113, no.1, pp.128 - 138, 2003-01 |
| 229 | Inverse estimation of the temperature field within a gas-filled duct section by use of acoustic data Kim, Tae Kyoon; Ih, Jeong-Guon, MEASUREMENT SCIENCE TECHNOLOGY, v.26, no.6, 2015-05 |
| 230 | Inverse Identification of Acoustic Source Information Ih, Jeong-Guon, WESPAC IX, pp.0 - 0, 2006-06 |
| 231 | Inverse Problems in Vibro-Acoustics Ih, Jeong-Guon, NOVEM, pp.0 - 0, 2005-04-01 |
| 232 | Inverse techniques for the identification and control of vibro-acoustic source parameters and physical properties of automotive systems Ih, Jeong-Guon, The 7th International styrian Noise, Vibration & Harshness Congress , ISNVH, 2012-06-14 |
| 233 | Inverse Vibro-acoustic Techniques for Automotive NVH Development Ih, Jeong-Guon, Aachen Acoustics Colloquium 2018, pp.135 - 163, Institute of Technical Acoustics of RWTH Aachen University, 2018-11-28 |
| 234 | Investigation of extended vehicle exhaust source model including non-linear and time varying effect Ih, Jeong-Guon; Kim, TK, Autumn Meeting of the ASK, pp.305 - 308, 2006 |
| 235 | Investigation on the Cause of Instability of Time Domain Acoustic BEM by Using the Wave Vector Concept Ih, Jeong-Guon, ICA2010, pp.0 - 0, 2010-08-26 |
| 236 | Investigation on the Correlation between Sound Quality and Special Composition of Vacuum Cleaner Sound by Using the Orthogonal Array Ih, Jeong-Guon; Lim, DH; Jeong, H; Shin, SH, Sound Quality Symposium, pp.0 - 0, 2002-08 |
| 237 | Investigation on the Tire Transient Vibration Using the BEM-based NAH and Fourier Analysis Ih, Jeong-Guon, ASK, pp.0 - 0, 2009-11 |
| 238 | KOMSAT-II Scale 모델의 실험적 연성 손실 인자 산출 Ih, Jeong-Guon, ASK, pp.0 - 0, 2003-10 |
| 239 | Layout of Engine Exhaust System for Low-Noise Idling Condition Ih, Jeong-Guon, ICSV16, pp.0 - 0, 2009-07-07 |
| 240 | Linear acoustic design of silencing system considering the acoustic higher-order modes Ih, Jeong-Guon; Lee, BH, 4th International COnference on Automotive Engineering, pp.197 - 197, 1987 |
| 241 | Localization of BSR Noise Source Using the Improved 3D Intensity Method Jung, In-Jee; Ih, Jeong-Guon, 10th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference, SAE international, 2018-06-21 |
| 242 | Localization of incoherent sound sources by three-dimensional intensity array = 3차원 인텐시티 어레이를 이용한 비상관 다중음원의 위치추정link Franek, Filip; 필립 플라녜크; et al, 한국과학기술원, 2014 |
| 243 | Localized generation of a vibration pattern on a thin plate by using traveling wave control with periphery actuator array Woo, Jung-Han; Ih, Jeong-Guon, The 169th ASA Meeting, Acoustical Society of America, 2015-05-20 |
