2291 | 차량 승차감 평가를 위한 인체 진동 모델 개발 = Biomechanical model of human for evaluating vehicle ride qualitylink 조영건; Cho, Young-Gun; et al, 한국과학기술원, 2000 |
2292 | 차량 안정성 제어 시스템의 강인성 제어기 설계 = Robust controller design for vehicle stability control systemlink 곽병학; Kwak, Byung-Hak; et al, 한국과학기술원, 2001 |
2293 | 차체강판 변형률속도 경화의 미시적 관찰 = Microscopic investigation of the strain rate hardening for auto-body steel sheetlink 윤종헌; Yoon, Jong-Hun; et al, 한국과학기술원, 2008 |
2294 | 차체강판의 중변형률 속도에서의 동적 인장시험 및 물성 구성방정식에 관한 연구 = Study on dynamic tensile tests of auto-body steel sheet at the intermediate strain rate for material constitutive equationslink 임지호; Lim, Ji-Ho; et al, 한국과학기술원, 2005 |
2295 | 차체용 부재의 충돌해석을 위한 복합하중조건에서 레이저 용접부의 동적 파단조건 연구 = Dynamic failure criteria of a laser-welded region under combined loading conditions for auto-body crash analyseslink 하지웅; Ha, Ji-Woong; et al, 한국과학기술원, 2013 |
2296 | 차체용 부재의 충돌해석을 위한 복합하중조건에서 점용접부의 동적 파단모델 연구 = A study on the dynamic failure model of a spot weld under combined loading conditions for auto-body crash analyseslink 송정한; Song, Jung-Han; et al, 한국과학기술원, 2008 |
2297 | 처프 광섬유 브래그 격자를 이용한 반복률 주사 범위 확장 광섬유 펨토초 레이저 = Fiber femtosecond laser using chirped fiber Bragg gratings for tuning range extension of pulse repetition ratelink 박지용; Park, Jiyong; et al, 한국과학기술원, 2017 |
2298 | 천음속 영역에서 유격을 고려한 날개의 공탄성 특성 = Aeroelastic characteristics of a wing with freeplay in transonic regionlink 박영근; Park, Young-Keun; et al, 한국과학기술원, 2005 |
2299 | 천음속 유동장을 고려한 굴곡형 흡입관에서의 소음 방사 해석 = An analysis of sound radiation from curved intake in transonic flow fieldlink 심인보; Shim, In-Bo; et al, 한국과학기술원, 2003 |
2300 | 천이영역 유동 해석을 위한 CFD-DSMC 혼합해석기법에 관한 연구 = (A) study on a hybrid CFD-DSMC method for simulations of transition regime flowslink 최영재; 권오준; et al, 한국과학기술원, 2019 |
2301 | 초고속 복합재료 회전 시스템의 설계 및 제작 = Design and manufacture of high speed composite rotor systemslink 장승환; Chang, Seung-Hwan; et al, 한국과학기술원, 2001 |
2302 | 초고속 전자회절 장치를 위한 레이저-RF 타이밍 동기화 = Laser-RF timing synchronization for ultrafast electron diffraction apparatuslink 양희원; 김정원; et al, 한국과학기술원, 2018 |
2303 | 초기 변형률 및 변형률 속도를 고려한 차체 강판의 인장/압축 경화 거동에 관한 연구 = A study on the tension/compression hardening behavior of auto-body steel sheets considering the pre-strain and the strain ratelink 배기현; Bae, Gi-Hyun; et al, 한국과학기술원, 2011 |
2304 | 초기 응력이 가해진 기저 구조물을 이용한 압전 유니모프의 개발 = Development of a piezoelectric unimorph with mechanically pre-stressed substratelink 강래형; Kang, Lae-Hyong; et al, 한국과학기술원, 2010 |
2305 | 초미세립 볼트 제조를 위한 다단성형기용 연속 ECAP 공정 설계 = Continuous ECAP process design for manufacturing an ultrafine-grained bolt in a multi-stage formerlink 진영관; Jin, Young-Gwan; et al, 한국과학기술원, 2011 |
2306 | 초소형 MHD 펌프 성능에 관한 해석 및 실험적 연구 = Analytical and experimental investigations on the performance of MHD micropumplink 김춘택; Kim, Chun-Taek; et al, 한국과학기술원, 2007 |
2307 | 초소형 고체추진제 추력기의 내탄도 모델링 및 성능평가 = Internal ballistic modeling of a solid propellant micro thruster and evaluationlink 양준서; Yang, June-Seo; et al, 한국과학기술원, 2009 |
2308 | 초음속 공기유동으로의 연료 분사에 관한 수치적 연구 = Numerical study on the fuel injection into a supersonic air streamlink 김경무; Kim, Kyung-Moo; et al, 한국과학기술원, 2002 |
2309 | 초음속 난류 전단유동의 수치적 모사 = Numerical simulation of supersonic turbulent shear flowslink 김민환; Kim, Min-Hwan; et al, 한국과학기술원, 1998 |
2310 | 초음속 유동에서 미소입자생성 및 부착현상에 관한 연구 = Formation and deposition of submicron particles in supersonic flowlink 오재준; Oh, Jae-Joon; et al, 한국과학기술원, 1994 |
2311 | 초음속 충돌 제트 유동의 진동 특성에 관한 수치적 연구 = Numerical investigation of the oscillatory behavior of supersonic impinging jet flowslink 김성인; Kim, Sung-In; et al, 한국과학기술원, 2005 |
2312 | 초음속 충동형 터빈의 부분 분사가 터빈 성능과 진동에 미치는 영향 = Partial admission effect on the performance and vibration of a supersonic impulse turbinelink 이항기; 권세진; et al, 한국과학기술원, 2018 |
2313 | 초음속 화학반응유동의 수치적 연구 = Numerical study of supersonic chemically reacting flowslink 정동규; Chung, Dong-Kyu; et al, 한국과학기술원, 1994 |
2314 | 초음파 근접장 음향 부상을 이용한 부상 물체 거동에 관한 연구 = A study on the motion of the levitated object in ultrasonic near-field acoustic levitationlink 김철호; Kim, Cheol-Ho; 송지호; Song , Ji Ho; et al, 한국과학기술원, 2007 |
2315 | 초음파 진동의 액체금속의 응고에 미치는 영향 = Effect of ultrasonic vibration on the solidification of liquid metallink 최영돈; Choi, Young-Don; et al, 한국과학기술원, 1979 |
2316 | 초점형 타원계측기의 위상 정보를 통한 생체분자의 단분자층 측정 = Biomolecule monolayer detection by phase information of focused-beam ellipsometerlink 이형철; Lee, Hyung-Chul; et al, 한국과학기술원, 2011 |
2317 | 초정밀 서어보형 가속도계의 개발에 관한 연구 = A study on development of precision servo accelerometerlink 제우성; Che, Woo-Seong; et al, 한국과학기술원, 1997 |
2318 | 초정밀 회전 오차 보상형 공기 베어링 스테이지의 설계 및 오차 보정에 관한 연구 = Design and error calibration of precision air bearing stage with yaw error compensationlink 김경천; Kim, Kyoung-Chon; et al, 한국과학기술원, 2011 |
2319 | 최대엔트로피법칙을 이용한 신뢰도기반 최적설계 = Application of maximum entropy principle for reliability-based design optimizationlink 강희엽; Kang, Hee-Youb; et al, 한국과학기술원, 2008 |
2320 | 추가 변형률 요소의 성능 개선에 관한 연구 = A study on improving the performance of enhanced assumed strain elementslink 여승태; Yeo, Seung-Tai; et al, 한국과학기술원, 1997 |
2321 | 추계론적 분석에 기초한 용접 변형의 생산비용 영향도 평가 및 응용 = A stochastic assessment method and its applications to the effect of welding distortion on production cost of ship and ocean plantlink 허희영; Heo, Hee Young; et al, 한국과학기술원, 2014 |
2322 | 추력 노즐 변화에 따른 수소 스크램제트 엔진 특성 = Investigation on the performance of hydrogen fuel scramjet engine with thrust nozzle variationlink 이양지; Lee, Yang-Ji; et al, 한국과학기술원, 2014 |
2323 | 추력벡터제어를 위한 이차 분사유동이 있는 2DCD 노즐 내부의 입자-기체유동 상호작용의 수치적 연구 = Numerical investigation of gas-particle interaction in 2DCD nozzle having a secondary jet injection for thrust vector controllink 이진규; Lee, Jin-Gyu; et al, 한국과학기술원, 2003 |
2324 | 축-베어링 시스템의 비선형 진동 해석 및 안정성 향상 방법에 관한 연구 = A study on nonlinear vibration analysis and improving method of stability characteristics of a rotor-bearing systemlink 노병후; Rho, Byoung-Hoo; et al, 한국과학기술원, 2001 |
2325 | 축대칭 난류 확산 화염에서의 매연 농도 및 화염 구조 예측에 관한 연구 = Predictions on the soot concentration and flame structure of the axisymmetric turbulent diffusion flameslink 정종수; Jurng, Jong-Soo; 이춘식; 신현동; et al, 한국과학기술원, 1989 |
2326 | 축대칭 물체의 3차원 접촉응력 해석 = A three dimensional contact stress analysis of axisymmetric bodieslink 박상규; Park, Sang-Gyu; et al, 한국과학기술원, 1986 |
2327 | 축류 및 혼합류 터보기계의 손실모형에 관한 연구 = A study on loss models of axial and mixed flow turbomachineslink 윤의수; Yoon, Eui-Soo; et al, 한국과학기술원, 1997 |
2328 | 축류압축기의 설계 최적화 = Design optimization of an axial-flow compressor stagelink 임진식; Lim, Jin-Shik; et al, 한국과학기술원, 1988 |
2329 | 축약그래프를 이용한 기구연쇄의 열거 및 형태합성에의 응용 = Enumeration of kinematic chains using contracted graphs and application to type synthesislink 이황진; Lee, Hwang-Jin; et al, 한국과학기술원, 1993 |
2330 | 축약모델을 이용한 등가시스템 구성 및 동특성에 관한 연구 = Investigation on equivalent system modeling and dynamic characteristics using reduced modelslink 신영석; Shin, Young-Sug; et al, 한국과학기술원, 1999 |
2331 | 축하중을 받는 표면피로균열의 진전거동에 관한 연구 = Surface crack growth behavior under axial loadinglink 김종한; Kim, Jong-Han; et al, 한국과학기술원, 1992 |
2332 | 충격파 / 난류 경계층 상호 간섭 현상의 전산 해석 = A computational study on shock-wave/turbulent-boundary-layer interaction phenomenalink 윤병국; Yoon, Byong-Kuk; et al, 한국과학기술원, 1995 |
2333 | 충돌하는 제트로 인한 합성제트 유동장에 수치연구 = Numerical study on the outwash jet arising from two opposing jetslink 조성호; Cho, Seong-Ho; et al, 한국과학기술원, 1997 |
2334 | 층간분리가 존재하는 복합재 적층판의 좌굴 및 좌굴후거동 해석 = Bucking and postbuckling behavior of composite laminates with a delaminationlink 김효진; Kim, Hyo-Jin; et al, 한국과학기술원, 1994 |
2335 | 층류 맥동류에서의 축방향 유효확산 평가를 위한 기초적 연구 = A fundamental study of evaluation of axial effective diffusion in laminar oscillating flowlink 김명배; Kim, Myung-Bae; et al, 한국과학기술원, 1996 |
2336 | 층류 예혼합 곡면 화염의 국부 안정성 해석 = Local stability analysis of laminar premixed curved flameslink 이대근; Lee, Dae-Keun; et al, 한국과학기술원, 2004 |
2337 | 층류 확산화염에서 복사경계조건 및 레이저 가열에 따른 매연 생성 및 산화특성에 관한 실험적 연구 = An experimental study of radiation shield and laser heating on the soot formation and oxidation of diffusion flamelink 이춘범; Lee, Chun-Beom; et al, 한국과학기술원, 2005 |
2338 | 캠 기구의 동역학을 고려한 캠 형상 최적설계 = Optimum cam profile design considering cam-follower system dynamicslink 전혁수; Jeon, Hyuck-Soo; et al, 한국과학기술원, 1991 |
2339 | 커넥팅 로드 베어링의 성능 해석에 관한 연구 = A study on the performance analysis of connecting rod bearingslink 김병직; Kim, Byung-Jik; et al, 한국과학기술원, 2001 |
2340 | 컴퓨터 비전을 이용한 공구상태 검사 시스템 개발에 관한 연구 = A study on the development of cutting tool inspection system using computer visionlink 권오달; Kwon, Oh-Dal; et al, 한국과학기술원, 1997 |
2341 | 케이싱 트리트먼트를 이용한 천음속 축류 압축기 안정성 향상 = Transonic axial compressor stability enhancement with casing treatmentlink 임병준; Lim, Byeung Jun; et al, 한국과학기술원, 2014 |
2342 | 크리깅 근사모델과 모멘트법을 이용한 신뢰도 기반 최적설계 = Reliability Based Design Optimization Using a Kriging Metamodel and a Moment Methodlink 주병현; Ju, Byeong-Hyeon; et al, 한국과학기술원, 2008 |
2343 | 크리프 변형재료에서 손상을 고려한 모드 I 정지균열의 응력장 해석 = Analysis of the stationary mode I crack in creeping solids coupled with damagelink 김진영; Kim, Jin-Young; et al, 한국과학기술원, 2002 |
2344 | 크립조건하의 균열 발생과 진전에 관한 연구 = A study on crack initiation and propagation under creep conditionslink 최영환; Choi, Young-Hwan; et al, 한국과학기술원, 1989 |
2345 | 큰 가로세로비 날개의 공력탄성학적 특성에 관한 연구 = A Study on aeroelastic characteristics of high-aspect-ratio wingslink 김경석; Kim, Kyung Seok; et al, 한국과학기술원, 2010 |
2346 | 타원 익형 공력 및 유동장 특성에 대한 실험적 연구 = Experimental study on aerodynamic and flow field characteristics of elliptic airfoilslink 권기정; Kwon, Ki-Jung; et al, 한국과학기술원, 2006 |
2347 | 탄성 변형 효과를 고려한 전진 비행하는 헬리콥터 로터 블레이드 공기역학 해석 = Aerodynamic analysis of helicopter rotor blades in forward flight considering elastic deflection effectslink 남화진; Nam, Hwa-Jin; et al, 한국과학기술원, 2008 |
2348 | 탄성체 내의 킹크균열과 계면밑균열 해석 = Analysis of a kink crack and a subinterface crack in an elastic solidlink 최승용; Choi, Seung-Yong; et al, 한국과학기술원, 1997 |
2349 | 탄소나노튜브 포화흡수체 모드잠금 레이저의 극초단 펄스 생성 및 응용에 관한 연구 = A study on the ultrashort pulse generation of a carbon-nanotube saturable absorber mode-locked laser and its applicationlink 권원식; Kwon, Won-Sik; et al, 한국과학기술원, 2016 |
2350 | 탄소나노튜브 포화흡수체를 이용한 광섬유 레이저 개발에 관한 연구 = The study on a mode-locked fiber laser with a carbon nanotube saturable absorberlink 류성윤; Ryu, Sung-Yoon; et al, 한국과학기술원, 2013 |