Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Type Thesis(Ph.D)

Showing results 2461 to 2479 of 2479

2461
확산화염의 비정상 거동에 관한 연구 = An experimental study on the unsteady behavior of strained diffusion flameslink

이의주; Lee, Eui-Ju; et al, 한국과학기술원, 2000

2462
확장된 유한차분형 수치기법을 이용한 나선형 스프링 동해석 = Dynamic analysis of a helical spring using an extended finite difference-type numerical schemelink

김성훈; Kim, Sung-Hoon; et al, 한국과학기술원, 1994

2463
환경 조건에 따른 가스 터어빈 엔진의 성능 변화에 대한 연구 = Environmental effects on the gas turbine engine performanceslink

이시우; Lee, Si-Woo; et al, 한국과학기술원, 2001

2464
회전아크를 이용한 자동용접에 관한 연구 = A study on automatic welding by using rotating arclink

김철희; KIm, Cheol-Hee; et al, 한국과학기술원, 2002

2465
회전익-고정익 상호간섭 및 블레이드 진동의 영향이 있는 축류 압축기내에서의 비정상 천음속 유동 = Unsteady transonic axial-compressor flow under the effect of rotor-stator interaction or blade vibrationlink

강인모; Kang, In-Mo; et al, 한국과학기술원, 1991

2466
횡방향 진동을 이용한 벨트구동계의 정적 장력 및 동적 장력의 규명 = Identification of static and dynamic tension in belt driving systems using flexural vibrationslink

임완택; Rim, Wan-Teck; et al, 한국과학기술원, 1993

2467
횡방향 충격을 받는 보의 초기 거동해석 및 충격력 복원에 관한 연구 = A study on transient response of an impacted beam and reconstruction of impact force from measured strain signallink

박형순; Park, Hyung-Soon; et al, 한국과학기술원, 1994

2468
효율적인 SMA 모델링 및 SMAHC의 동적/음향 특성 = Effective SMA Modeling and Dynamic/Acoustic Characteristics of SMAHClink

강명구; Kang, Myung-Koo; et al, 한국과학기술원, 2011

2469
후래시 분무의 미립화 기구에 대한 연구 = Study of atomization mechanism in flashing sprayslink

박병서; Park, Byung-Suh; et al, 한국과학기술원, 1994

2470
후류 효과를 고려한 헬리콥터 로터 블레이드의 공탄성 특성 = Wake effects on aeroelastic characteristics of helicopter rotor bladeslink

유승재; Yoo, Seung-Jae; et al, 한국과학기술원, 2011

2471
후판 곡면 복합재 구조물의 레이저 초음파 검사를 위한 회전식 스캐닝 기법 = Rotational scanning method for laser ultrasonic inspection of thick and curved composite structurelink

이영준; 이정률; et al, 한국과학기술원, 2019

2472
후향 계단에서 재부착하고 재전개하는 2차원 비압축성 흐름 해석 = Analysis for two-dimensional incompressible reattaching and redeveloping flow behind a rearward-facing steplink

김성초; Kim, Sung-Ch'o; 박승오; 장극; et al, 한국과학기술원, 1989

2473
휴리스틱 탐색방법을 이용한 선삭가공용 자동 공정계획 시스템에 관한 연구 = A study on the computer aided process planning system for turning using heuristic search algorithmlink

이성찬; Lee, Sung-Chan; et al, 한국과학기술원, 1998

2474
휴머노이드형 스키 로봇의 개발 및 제어에 관한 연구 = Development of skiing humanoid robotlink

설우진; 김수현; et al, 한국과학기술원, 2020

2475
흐름방향 압력구배가 후방계단 뒤 난류 재부착흐름에 미치는 영향에 대한 실험적 연구 = An experimental investigation of the effects of streamwise pressure gradients on a turbulent reattaching flow downstream od rearward-facing steplink

라승호; Ra, Seung-Ho; 박승오; 장극; et al, 한국과학기술원, 1990

2476
흡입구 연료분사 방식 스크램제트 엔진의 연료-공기 혼합 및 성능 특성에 대한 수치적 연구 = Numerical investigation of fuel-air mixing and performance characteristics in an Inlet-fueled scramjet enginelink

김재원; 권오준; et al, 한국과학기술원, 2018

2477
反復應力-變形率關係와 短壽命疲勞 = Cyclic stress-strain relationship and low cycle fatiguelink

양창주; Yang, Chang-Joo; et al, 한국과학기술원, 1978

2478
構造物의 모드 偏在現象과 偏在敏感度의 評價方法에 관한 硏究 = An assessment technique for mode localization and localization sensitivity of structureslink

김동옥; Kim, Dong-Ok; et al, 한국과학기술원, 1998

2479
産業用 로봇을 利用하는 自動 組立에 있어서 組立 戰略의 學習에 관한 硏究 = A Study on learning of assembly strategies in automated robotic assembly systemlink

안두성; Ahn, Doo-Sung; et al, 한국과학기술원, 1992

rss_1.0 rss_2.0 atom_1.0