Browse "School of Mechanical and Aerospace Engineering(기계항공공학부)" by Type Thesis(Ph.D)

Showing results 121 to 180 of 2480

121
(A) study on design optimization of stoker type municipal waste incinerator for low emission = 스토커식 도시 폐기물 소각 연소실의 저공해화를 위한 설계 최적화에 관한 연구link

Shin, Dong-Hoon; 신동훈; et al, 한국과학기술원, 1998

122
(A) study on designing high-performance membrane reactors for on-site hydrogen production using liquid fuel = 액체연료 활용 on-site 수소 생산을 위한 고성능 멤브레인 반응기 설계에 관한 연구link

Yoo, Jae Young; Bae, Joongmyeon; et al, 한국과학기술원, 2023

123
(A) study on elastoplastic contact analysis using smoothed finite element methods = 완화 유한요소법을 이용한 탄소성 접촉 해석에 대한 연구link

Son, Youngtak; Im, Seyoung; et al, 한국과학기술원, 2018

124
(A) study on error estimates and an adaptive scheme of least-squares meshless method = 최소 제곱 무요소법의 오차 추정 및 적응적 기법에 관한 연구link

Park, Sang-Hoon; 박상훈; et al, 한국과학기술원, 2001

125
(A) study on general offset and transformation of triangular mesh for effective NC tool path generation = 효율적인 NC 공구 경로 생성을 위한 삼각형 망 모델의 옵셋과 변형에 관한 연구link

Kim, Su-Jin; 김수진; et al, 한국과학기술원, 2005

126
(A) study on improving the performance of chassis control systems using vehicle understeer characteristics = 언더스티어 특성을 활용한 차량 샤시 제어 시스템의 성능 향상에 관한 연구link

Han, Kyoung-Seok; Choi, Seibum; et al, 한국과학기술원, 2018

127
(A) study on improving the response of electro-hydrostatic actuation system based on hybrid actuation control = 하이브리드 구동 제어를 통한 EHA 유압 시스템의 응답성 향상에 관한 연구link

Seo, Hyung-Tae; Kim, Kyung-Soo; et al, 한국과학기술원, 2020

128
(A) study on lateral motion control of electronic-four-wheel drive vehicle using sensor fusion algorithm = 센서 융합 알고리즘을 활용한 전자식 사륜 구동 차량의 횡방향 거동 제어에 관한 연구link

Park, Gi-Seo; Choi, Seibum; et al, 한국과학기술원, 2020

129
(A) study on localized mortar-based gap element method for treating non-matching discrete interfaces = 불일치 격자 경계면 처리를 위한 국부 모르타르기반 갭 요소법 연구link

Song, Yeoul; 송여울; et al, 한국과학기술원, 2017

130
(A) study on mechanical characteristics of metal nanoparticle thin films on flexible substrates = 유연 기판 위 금속 나노입자 박막의 기계적 특성link

Kim, Sanghyeok; 김상혁; et al, 한국과학기술원, 2016

131
(A) study on non-fragile fixed-structure controller design for parameter uncertain systems = 파라미터 불확실성 시스템에 대한 비약성 제어기 설계에 관한 연구link

Park, Sung-Wook; 박성욱; et al, 한국과학기술원, 2002

132
(A) study on novel battery management system using nonlinear battery cell model and consensus algorithm = 배터리 셀의 비선형 모델과 컨센서스 알고리즘을 이용한 새로운 배터리 관리 시스템 연구link

Kim, Woo-Yong; Kim, Kyung-Soo; et al, 한국과학기술원, 2020

133
(A) study on numerical analysis of welding arc and molten pool considering electrode angle in stationary TIG welding = 고정된 TIG 용접에 있어서 전극봉각을 고려한 용접아크와 용융지의 수치해석에 관한 연구link

Lee, Seung-Young; 이승영; et al, 한국과학기술원, 1994

134
(A) study on optimal deployment and maintenance strategy of satellite mega-constellation = 거대 위성군 최적 전개와 유지보수에 관한 연구link

Sung, Taehyun; Ahn, Jaemyung; et al, 한국과학기술원, 2023

135
(A) study on polyhedral elements by means of the smoothed finite element method for elastic problems = 탄성문제 해석을 위한 완화 유한요소법 기반 다면체 요소의 연구link

Lee, Chan; 이찬; et al, 한국과학기술원, 2016

136
(A) study on power-split flywheel hybrid powertrain configuration using multiple planetary gears and a continuously variable transmission = 다중 유성기어와 무단변속기를 이용한 동력분기식 플라이휠 하이브리드 파워트레인 구조 연구link

Song, Chiwoong; Kim, Kyung-Soo; 김경수; Kum, Dong Suk; et al, 한국과학기술원, 2019

137
(A) study on process analysis and welding parameter optimization in the GTA Circumferential pipe welding = 파이프 GTA 원주용접에서 공정해석 및 용접변수 최적화에 관한 연구link

Lho, Tae-Jeong; 노태정; et al, 한국과학기술원, 1992

138
(A) study on pyroshock reduction by optimizing low-shock pyrotechnic separation device and using elastic wave refraction = 저충격 파이로 분리장치 최적화 및 탄성파 굴절을 통한 충격 저감기법에 대한 연구link

Hwang, Dae-Hyun; Han, Jae-Hung; et al, 한국과학기술원, 2020

139
(A) study on rapid manufacturing process and applications by high-speed machining with automatic filling = 고속가공과 자동 충진공정을 이용한 쾌속 제작공정 및 응용에 관한 연구link

Shin, Bo-Sung; 신보성; et al, 한국과학기술원, 2002

140
(A) study on selection of adequate welding parameters by considering weld bead shape and weld defects and development of seam tracker in horizontal fillet welding = 수평필릿용접에서 용접부 형상 및 용접결함을 고려한 적절한 용접변수 선정과 이를 이용한 용접선 추적에 관한 연구link

Moon, Hyeong-Soon; 문형순; et al, 한국과학기술원, 1997

141
(A) study on separation mechanism, pyroshock generation and propagation of pyrotechnic release devices = 파이로 분리장치의 분리 메커니즘, 파이로충격 생성 및 전파 특성에 관한 연구link

Lee, Juho; 이주호; et al, 한국과학기술원, 2016

142
(A) study on the 3D analysis of micro-scale deformation and the laser speckle measurement in the laser precision joining of small structure = 소형 구조물의 레이저 정밀접합에 있어서 미세변형의 3차원 해석과 광학적 변위측정에 관한 연구link

Chang, Won-Seok; 장원석; et al, 한국과학기술원, 2001

143
(A) study on the acoustic characterization of perforated elements in the presence of flow = 유동이 존재하는 천공요소의 음향 특성 파악에 관한 연구link

Lee, Seong-Hyun; 이성현; Ih, Jeong-Guon; et al, 한국과학기술원, 2006

144
(A) study on the acoustic characterization of porous woven hoses = 직조관의 음향 특성 파악에 관한 연구link

Park, Chul-Min; 박철민; et al, 한국과학기술원, 2002

145
(A) study on the acoustic design of sound source array by the inverse approach = 역 문제 해결 기법을 이용한 음원 어레이 설계에 관한 연구link

Cho, Wan-Ho; 조완호; et al, 한국과학기술원, 2008

146
(A) study on the AI-based navigation and obstacle detection for mobile robots = AI기법을 이용한 이동로봇의 항법 및 장애물 감지에 관한 연구link

Beom, Hee-Rak; 범희락; et al, 한국과학기술원, 1994

147
(A) study on the analysis of grinding mechanism and development of dressing system by using optimum in-process electrolytic dressing = 최적 연속 전해드레싱에 의한 연삭기구의 규명 및 시스템 개발에 관한 연구link

Lee, Eun-Sang; 이은상; et al, 한국과학기술원, 1998

148
(A) study on the analysis of weld pool convection and seam tracking by considering the arc length characteristics in GMA welding = GMA 용접에서 아크길이의 특성을 고려한 용접부의 열 및 유체유동 해석과 용접선 자동추적에 관한 연구link

Kim, Jae-Woong; 김재웅; et al, 한국과학기술원, 1991

149
(A) study on the auto-nesting and optimal torch path planning for automatization of laser cutting process = 레이저 절단공정의 자동화를 위한 자동배치 및 최적 절단 경로 계획에 관한 연구link

Han, Guk-Chan; 한국찬; et al, 한국과학기술원, 1996

150
(A) study on the characteristics of direct contact condensation of a steam jet into a quenching tank through a single horizontal nozzle = 단일수평배관을 통해 응축탱크로 방출되는 증기제트의 직접접촉응축 특성에 대한 연구link

Kim, Hwan-Yeol; 김환열; et al, 한국과학기술원, 2001

151
(A) study on the control of nonlinear systems using fuzzy learning method = 퍼지학습법을 이용한 비선형시스템의 제어에 관한 연구link

Chung, Byeong-Mook; 정병묵; et al, 한국과학기술원, 1994

152
(A) study on the cure process design for the carbon phenolic thick composite cylinders with reduced residual stresses = 두꺼운 탄소 페놀 복합재료 실린더의 잔류응력 저감을 위한 경화공정 설계에 관한 연구link

Kim, Jong-Woon; 김종운; et al, 한국과학기술원, 2007

153
(A) study on the cure process for epoxy molding compound to enhance the reliability of semiconductor package = 반도체 패키지의 신뢰성 향상을 위한 에폭시 몰딩 컴파운드의 경화 공정에 관한 연구link

Park, Seong Yeon; Kim, Seong Su; et al, 한국과학기술원, 2022

154
(A) study on the damage monitoring of adhesive joints by piezoelectricity = 압전 특성을 이용한 접착 조인트의 손상 모니터링에 관한 연구link

Hwang, Hui-Yun; 황희윤; et al, 한국과학기술원, 2005

155
(A) study on the decentralized estimation using gain transfer for multi : sensor navigation and tracking = 이득 전달을 이용한 분산 추정기법 개발에 관한 연구 : 항법 및 추적 문제에의 적용link

Paik, Bok-Soo; 백복수; et al, 한국과학기술원, 2000

156
(A) study on the determination of accurate inverse kinematics in a high precision magnetic levitation system = 자기부상 초정밀 시스템의 정확한 인버스 키네마틱스 결정에 관한 연구link

Jeong, Jae-heon; Gweon, Dae-Gab; et al, 한국과학기술원, 2017

157
(A) study on the development of self-powered gas sensor using chemical color change or mechanical structure change by gas reaction = 가스 반응에 의한 화학적 색 변화 또는 기계적 구조 변화를 이용한 자가 발전형 가스 센서 개발에 관한 연구link

Kang, Kyungnam; Park, Inkyu; et al, 한국과학기술원, 2019

158
(A) study on the effective non-matching interface treatment methods in multi-structure problems and their applications to topology optimization = 다중 구조물의 효과적인 불일치 격자 처리 방법과 이를 이용한 위상 최적설계에 관한 연구link

Jeong, Gil-Eon; Youn, Sung Kie; et al, 한국과학기술원, 2018

159
(A) study on the equilibrium state and the stability of Reynolds stress equations for homogeneous shear flows = 난류 균일전단류에서 레이놀즈응력모형의 평형상태 및 안정성에 관한 연구link

Lee, Won-Geun; 이원근; et al, 한국과학기술원, 1996

160
(A) study on the gain scheduling in a linear parameter varying system = 시변 변수를 가진 선형 시스템의 이득 스케줄링에 관한 연구link

Kim, Eun-Hee; 김은희; et al, 한국과학기술원, 2004

161
(A) Study on the generation & degeneration of 3-dimensional data from / into 2-dimensional images - combustion diagnostic applications = 2차원 데이터의 3차원 재구성기법과 3차원 데이터의 2차원 영상화기법을 이용한 연소진단연구link

Ha, Kwang-Soon; 하광순; et al, 한국과학기술원, 2000

162
(A) study on the growth and prediction of wrinkles in sheet metal forming processes using bifurcation theory = 분기 좌굴 이론을 이용한 박판성형 공정에서의 주름의 발생 및 예측에 관한 연구link

KIM, Jong-Bong; 김종봉; et al, 한국과학기술원, 2000

163
(A) study on the improvement of isogeometric shape and topology optimization = 등기하법 기반의 형상 및 위상최적설계 개선에 관한 연구link

Hur, Junyoung; 허준영; et al, 한국과학기술원, 2017

164
(A) study on the inverse analysis of diffusion-controlled turbulent combustion phenomena in cylindrical combustor = 원통형 연소기내 확산지배 난류 연소현상의 역해석에 관한 연구link

Lee, Kyun-Ho; 이균호; et al, 한국과학기술원, 2009

165
(A) study on the least-squares meshfree method in the analysis of elastic-plastic deformation = 최소 제곱 무요소법을 이용한 탄소성 변형 해석에 관한 연구link

Kwon, Kie-Chan; 권기찬; et al, 한국과학기술원, 2004

166
(A) study on the light weight composite PEMFC system = 경량 복합재료 연료전지 시스템에 관한 연구link

Kim, Minkook; 김민국; et al, 한국과학기술원, 2016

167
(A) study on the mass transfer from a square cylinder and its base plate using naphthalene sublimation technique = 나프탈렌승화법을 이용한 사각봉과 직교기판에서의 물질전달에 관한 연구link

Yoo, Seong-Yeon; 유성연; et al, 한국과학기술원, 1989

168
(A) study on the mechanical reliability of solder joints in electronic packaging = 전자 패키지 소더 조인트의 기계적 신뢰성에 관한 연구link

Ham, Suk-Jin; 함석진; et al, 한국과학기술원, 2002

169
(A) study on the modelling and suboptimal control of the resistance spot welding process = 저항 용접 과정의 모델링과 부최적 제어에 관한 연구link

Cho, Young-June; 조영준; et al, 한국과학기술원, 1986

170
(A) study on the monitoring system for intelligent turning operation = 선삭가공의 지능화를 위한 감지시스템에 관한 연구link

Youn, Jae-Woong; 윤재웅; et al, 한국과학기술원, 1995

171
(A) study on the numerical optimization of the thermal performance of pulsating heat pipes = 진동형 히트파이프의 수치적 열성능 최적화에 관한 연구link

Noh, Hyung Yun; Kim, Sung Jin; et al, 한국과학기술원, 2020

172
(A) study on the optimization of process parameters using a semi-analytical finite element method in circumferential gas tungsten arc welding of a aluminum pipe = 알루미늄 파이프의 원주 방향 GTA 용접에서 Semi-Analytical 유한요소법을 이용한 열유동 해석 및 용접 조건 최적화에 관한 연구link

Lee, Ho-Jin; 이호진; et al, 한국과학기술원, 1992

173
(A) study on the optimum design of a pick-up actuator using a time optimal technique = 시간최적화 기법을 이용한 광픽업 구동기의 최적설계에 관한 연구link

Kim, Sun-Mo; 김선모; et al, 한국과학기술원, 2001

174
(A) study on the origami-based reconfigurable tubular structure = 종이접기 기반의 가변 형상 튜브 구조에 관한 연구link

Suh, Jong-Eun; Han, Jae-Hung; et al, 한국과학기술원, 2022

175
(A) study on the position estimation of a wheeled mobile robot = 차륜형 이동 로보트의 위치 추정 방법에 관한 연구link

Kim, Jae-Hee; 김재희; et al, 한국과학기술원, 1992

176
(A) study on the precision ball-end milling of free-form surfaces = 자유곡면의 정밀 볼엔드 밀링 공정에 관한 연구link

Sim, Choong-Gun; 심충건; et al, 한국과학기술원, 1993

177
(A) study on the prediction of fatigue crack growth considering roughness-induced closure and plasticity-induced closure = 거칠기유기닫힘과 소성유기닫힘을 고려한 피로균열진전 예측에 관한 연구link

Kim, Jong-Ho; 김종호; et al, 한국과학기술원, 2001

178
(A) study on the radiation characteristics andacoustic performance of korean bells = 한국 범종의 음향학적 특성에 관한 연구link

Yi, Sung-Il; 이성일; et al, 한국과학기술원, 1986

179
(A) study on the realization of dynamic gait for a biped humanoid robot = 인간형 이족 보행 로봇의 동적 걸음새 구현에 관한 연구link

Kim, Jung-Hoon; 김정훈; et al, 한국과학기술원, 2004

180
(A) study on the realization of dynamic running for a humanoid biped = 인간형 이족 로봇의 달리기 구현에 관한 연구link

Cho, Baek-Kyu; 조백규; et al, 한국과학기술원, 2009

rss_1.0 rss_2.0 atom_1.0