Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1601 to 1620 of 2223

1601
기계적 합금화한 ODS Ni 초내열 합금의 2차 재결정 거동에 대한 연구 = A study on the secondary recrystallization behaviour of mechanically alloyed ODS Ni-base superalloylink

김상범; Kim, Sang-Beom; et al, 한국과학기술원, 1994

1602
기계적 합금화한 ODS Ni기 초내열 합금의 재결정 거동 및 기계적 성질 = Recrystallization behaviour and mechanical properties of mechanically alloyed ODS Ni-base superalloylink

김희연; Kim, Hee-Yeoun; et al, 한국과학기술원, 1993

1603
기공 특성이 다공성 세라믹스의 역학적 성질에 미치는 영향 = Effect of pore characteristics on mechanical properties of porous ceramicslink

하장훈; Ha, Jang-Hoon; et al, 한국과학기술원, 2004

1604
기공을 포함한 BaTiO3 모델계에서 입계구조에 따른 입자성장 양상 = Effect of grain boundary structure on grain growth behavior in porous BaTiO3link

신지선; Shin, Ji-Seon; et al, 한국과학기술원, 2013

1605
기상 반응을 이용한 산화아연 (Zincite)단결정 성장에 관한 연구 = Growth of zinc oxide single crystals by vapor phase reaction methodlink

유한일; Yoo, Han-Ill; et al, 한국과학기술원, 1976

1606
기상유도결정화법과 급속열처리를 이용한 다결정 Si 박막에서의 Ni 금속 오염량 감소 및 다결정 Si 박막 트랜지스터 특성에 관한 연구 = Control of Ni contamination in polycrystalline Si films by vapor-induced crystallization and rapid thermal annealing process and characterization of polycrystalline Si thin film transistorslink

김존수; Kim, John-Soo; et al, 한국과학기술원, 2013

1607
기체차단 코팅 응용을 위한 광경화 지환식 에폭시 하이브리머 조성의 최적화 = Optimization of photo-curable cycloaliphatic epoxy hybrimer for application of gas barrier coatinglink

임현균; Im, Hyeon-Gyun; et al, 한국과학기술원, 2013

1608
기판용 AlN-Al2O3 복합재료의 미세구조와 열적/전기적/기계적 특성 = Microstructure and thermal/electrical/mechanical properties of AlN-Al2O3 composite for substrate applicationlink

김민건; Kim, Min-Kun; et al, 한국과학기술원, 2011

1609
나노 흡착제가 Li/S 이차전지용 유황양극의 전기화학적 특성에 미치는 영향 = The effects of the nano-sized adsorbing material on the electrochemical properties of sulfur cathode for lithium/sulfur secondary batterylink

송민상; Song, Min-Sang; et al, 한국과학기술원, 2003

1610
나노인덴터를 활용한 RF MEMS 스위치의 신뢰성 평가 연구 = Characterization of contact reliability in RF MEMS switch using nano-indenterlink

김동석; Kim, Dong-Seok; et al, 한국과학기술원, 2010

1611
나노탬플릿과 원자층 증착법을 이용한 정렬된 TiN, $TiO_2$ 일차원 나노구조의 제조와 특성평가 = Fabrication and characterization of aligned TiN, $TiO_2$ one-dimensional nanostructures by nanotemplate and atomic layer depositionlink

김상준; Kim, Sang Joon; et al, 한국과학기술원, 2013

1612
나노템플릿을 이용한 금속 나노와이어 성장에 관한 연구 = A study on the growth of metal nanowires based on template methodlink

신호선; Shin, Ho-Sun; et al, 한국과학기술원, 2007

1613
나프토퀴논디아지드를 도입한 중합체의 합성 및 감광특성 = Synthesis and characterization of phtosensitive polymers contatining Naphethoquinonediazidelink

정민호; Jung, Min-Ho; et al, 한국과학기술원, 1994

1614
낮은온도, 1기압수소압력하에서 순철과 철합금에 용해되는 수소양에 대한 고찰 = Hydrogen solubility in iron and its alloys at low temperature and atmospheric hydrogen pressurelink

조창국; Cho, Chang-Guck; et al, 한국과학기술원, 1980

1615
내부 압력 인가 법을 통한 입자형 핵연료의 탄화규소 코팅 층에 대한 파괴 강도 평가 = Characterization of the fracture strength for SiC coating layer in TRISO fuel particles by internal pressurization testlink

김민우; Kim, Min-U; 김도경; Kim, Do-Kyung; et al, 한국과학기술원, 2008

1616
내후성강 (USS COR-TEN C Steel)에서 V 을 Ti 으로 치환할 경우 강의 기계적 성질에 미치는 영향 = The effects of substituting Ti for V on mechanical properties in a weathering type HSLA steel (USS COR-TEN C steel)link

한종만; Han, Jong-Man; et al, 한국과학기술원, 1982

1617
냉각 속도가 알루미늄 합금의 응고시 편석에 미치는 영향에 관한 실험적 및 수치해석적 연구 = Effect of cooling rate on the solidification segregation of aluminum alloyslink

최정윤; Choi, Jeong-Yun; et al, 한국과학기술원, 2001

1618
냉각속도가 W-Ni-Fe 고밀도합금의 기계적 성질에 미치는 영향 = The effect of cooling rate on mechanical properties of W-Ni-Fe heavy alloylink

문유현; Moon, You-Hyun; et al, 한국과학기술원, 1977

1619
냉각속도가 철-동계 소결체의 강도에 미치는 영향 = The effect of cooling rate on the strength of iron-copper sintered compactslink

강수석; Kang, Su-Sok; et al, 한국과학기술원, 1975

1620
냉간 가공량이 방향성 규소강판의 2차 재결정에 미치는 영향 = The role of cold work on the secondary recrystallization of silicon steellink

한장섭; Hahn, Jang-Sop; et al, 한국과학기술원, 1981

rss_1.0 rss_2.0 atom_1.0