Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 2081 to 2100 of 2170

2081
테스트 패턴을 이용한 다결정 실리콘 박막의 열팽창 계수 측정에 관한 연구 = Measurement of thermal expansion coefficient of polycrystalline silicon thin film by micro test patternslink

채정헌; Chae, Jung-Hun; et al, 한국과학기술원, 1997

2082
테이프 캐스팅된 Park-Rapp구조의 고체전기화학식 수소센서를 이용한 변압기 오일 열화 감지 시스템에 관한 연구 = Study on transformer-oil degradation-monitoring system using tape casted park-rapp solid-state electrochemical hydrogen sensorlink

이대로; Lee, Dae-Ro; et al, 한국과학기술원, 2014

2083
투명하고 유연한 기판 위에서 Poly(vinylidene trifluoroethylene) 박막의 제조와 특성분석 = Fabrication and characterization of Poly(vinylidene trifluoroethylene) thin films on transparent and flexible substrateslink

최윤영; Choi, Yoon-Young; et al, 한국과학기술원, 2010

2084
트란스-시클로옥텐의 중합 = Polymerization of trans-cyclooctenelink

강인수; Kang, In-Soo; et al, 한국과학기술원, 1997

2085
티타늄 부동태 피막의 반도체적 특성과 재부동태 속도론에 관한 연구 = A study on semiconducting properties of passive film on Ti and its repassivation kineticslink

김동영; Kim, Dong-Yung; et al, 한국과학기술원, 2001

2086
티타늄-철과 그 합금의 수소화합물 형성에 관한 연구 = Study on the hydride formation TiFe and its alloyslink

이영재; Lee, Young-Jae; et al, 한국과학기술원, 1982

2087
티타늄의 수소 흡수와 구리 전착에 미치는 양극 산화의 영향 = Effects of anodic oxidation on the hydrogen absorption into Ti and its influence on electrodeposition of Culink

정준호; Jung, Jun-Ho; et al, 한국과학기술원, 2004

2088
펄스 레디저 조사에 의한 비정질 실리콘 박막의 재결정화에 관한 연구 = A study on the recrystallization of amorphous silicon thin film by the pulsed-laser irradiationlink

맹성렬; Maeng, Sung-Lyul; et al, 한국과학기술원, 1995

2089
펄스 레이저 증착에 의한 $YBa_2Cu_3O{7-x}$ 고온 초전도 바각의 배향성에 관한 연구 = A study of the crystallographic orientation of $YBa_2Cu_3O{7-x}$ thin films by pulsed laser depositionlink

김홍승; Kim, Hong-Seung; et al, 한국과학기술원, 1993

2090
펄스레이저 증착법에 의한 $YBa_2Cu_3O_x$ 박막의 저온증착 특성과 초고주파특성에 관한 연구 = A study on the low temperature deposition and microwave characteristics of $YBa_2Cu_3O_x$ thin film deposited using pulsed laser ablation methodlink

이희철; Lee, Hui-Chul; et al, 한국과학기술원, 1997

2091
펄스와 직류 이온질화에 따른 Hole 시편에서의 질화거동에 관한 비교 연구 = A comparative study on the nitriding behavior of hole speciman between pulse and D.C. ion nitridinglink

이건환; Lee, Gun-Hwan; et al, 한국과학기술원, 1986

2092
펄스화학기상침투법에 의한 탄소/탄소 복합재료의 치밀화에 관한 연구 = Densification of carbon/carbon composite by pulse chemical vapour infiltrationlink

정혁제; Jeong, Hyeok-Je; et al, 한국과학기술원, 1995

2093
페로브스카이트 구조를 갖는 재료에서 Ruddlesden-Popper 결함의 형성과 조건 = Formation of ruddlesden-popper faults in perovskite-structure materialslink

홍영재; 정성윤; et al, 한국과학기술원, 2019

2094
페로브스카이트 태양 전지의 결정 형성 과정에서의 $Pb(SCN)_2$ 첨가물의 효과 연구 = Effects of $Pb(SCN)_2$ additive on crystal formation in Perovskite solar cellslink

김미경; 김상욱; et al, 한국과학기술원, 2016

2095
펩타이드 나노선의 제조 및 액정 거동 분석 = Synthesis and liquid crystalline behavior of peptide nanowireslink

박지선; Park, Ji-Sun; et al, 한국과학기술원, 2008

2096
평면 마그네트론 스퍼터링 시스템에서의 타겟 효율 향상을 위한 연구 = Enhancement of target utilization in a planar magnetron sputtering systemlink

서태원; Seo, Tae-Won; et al, 한국과학기술원, 2004

2097
평면형 금속/절연막/다결정실리콘/절연막/금속 안티퓨즈 구조의 금속도선 형성에 관한 연구 = A study on the metal line formation in planar metal/dielectric/poly-Si/dielectric/metal antifuse structurelink

정승훈; Chong, Sung-Hoon; et al, 한국과학기술원, 1995

2098
폐 아크릴섬유를 이용한 섬유상 활성탄의 제조 = Preparation of fibrous activated carbon from waste acrylic fiberslink

김광무; Kim, Kwang-Moo; et al, 한국과학기술원, 1995

2099
폴리(1,1'-나프틸 부타디엔)의 합성과 수소화 중합체 = Synthesis of poly(1,1'-naphthylbutadiene) and hydrogenated polymerslink

김현진; Kim, Hyun-Jin; et al, 한국과학기술원, 1996

2100
폴리(1-아릴-1,3-부타디엔) 및 수소화 고분자의 미세구조 = Microstructure of poly(1-aryl-1,3-butadiene) and hydrogenated polymerslink

최석경; Choi, Seok-Kyeong; et al, 한국과학기술원, 1998

rss_1.0 rss_2.0 atom_1.0