1 | 0.4-0.6 Tm 온도영역에서 Ni-Cu 이원합금들의 정상상태 creep 특성에 관한 연구 = Steady state creep characteristics of Ni-Cu binary solid solution alloys in the temperature range of 0.4-0.6 Tmlink 이준정; Yi, Joon-Jeong; et al, 한국과학기술원, 1979 |
2 | 0.6 Tm 온도영역에서의 INCONEL alloy 718 에 대한 cyclic creep 특성에 관한 연구 = A study on the cyclic creep characteristics of INCONEL alloy 718 at 0.6 Tm temperature rangelink 최인식; Choi, In-Sik; et al, 한국과학기술원, 1980 |
3 | 12% 크롬강의 고온 저주파 피로수명에 미치는 유지시간의 영향 = The effect of hold time on the high temperature low cycle fatigue life in 12%Cr steellink 공병욱; Kong, Byeong-Ook; et al, 한국과학기술원, 1990 |
4 | 18Cr-9Ni 스테인리스강의 질소함량에 따른 크리프-파단 특성 연구 = The study of nitrogen effect on the characteristics of creep-rupture in 18Cr-9Ni austenitic steelslink 신재경; Shin, Jae-Kyoung; et al, 한국과학기술원, 2005 |
5 | 2.9니켈-1.1크롬강에서 크립기공과 균열성장의 기구에 관한 연구 = A study of mechanism for the creep cavitation and crack growth of 2/9 Ni-1.1 Cr steellink 홍성호; Hong, Sung-Ho; 남수우; 유진; et al, 한국과학기술원, 1985 |
6 | 27 % Cu-Ni 합금의 cyclic creep 상태에 미치는 응력 주기의 영향 = Stress period effect or cyclic creep of cupper-nickel alloylink 홍경태; Hong, Kyung-Tae; et al, 한국과학기술원, 1982 |
7 | 304 스테인리스 강의 부식피로에 Hold time 이 미치는 영향 = Hold time effects on corrosion fatigue of type 304 stainless steellink 손상현; Son, Sang-Hyun; et al, 한국과학기술원, 1984 |
8 | 316L 모재부와 308L 용접부의 크리프-피로 특성과 용접후열처리가 용접부의 크리프-피로 특성에 미치는 영향 = Creep-fatigue properties of 316L base metal and 308L weldment and the effect of PWHT on the creep-fatigue property of the weldmentlink 황인호; Hwang, In-Ho; et al, 한국과학기술원, 2005 |
9 | 316L 스테인리스강의 모재부와 용접부의 고온저주기피로 시 미세구조변화와 파괴특성연구 = The study on the microstructure evolution and fracture behaviors during low cycle fatigue at elevated temperature for base metal and weldment of 316L stainless steellink 정재규; Jung, Jae-Gyu; et al, 한국과학기술원, 2004 |
10 | 316L 스테인리스강의 크리프-피로 상호작용시 입계석출물 밀도에 미치는 보론과 질소의 영향 = The effect of boron and nitrogen on grain boundary carbide density under creep-fatigue interaction in 316L stainless steellink 민경선; Min, Kyung-Seon; et al, 한국과학기술원, 1999 |
11 | 7075 알루미늄 합금의 기계적 성질 개선을 위한 Mn 첨가의 영향 = Effects of manganese on improving the mechanical properties of 7075 aluminum alloylink 최이성; Choi, Yee-Seong; et al, 한국과학기술원, 1993 |
12 | 70Cu-30Ni 합금에서 유효응력과 전위구조로 해석한 creep 기구에 관한 연구 = An interpretation of the creep mechanism of 70Cu-30Ni alloy in terms of effective stress and dislocation structurelink 홍준화; Hong, Jun-Hwa; et al, 한국과학기술원, 1980 |
13 | 77 wt.% -Cu 이원계 고용체 합금의 cylic creep 거동에 관한 연구 = Cyclic creep behaviors of 77wt% Ni-Cu binary solid solution alloylink 한광현; Han, Kwang-Hyun; et al, 한국과학기술원, 1981 |
14 | 78Ni-22Cu 합금의 creep 특성에 관한 연구 = Steady state creep characteristics of Cu-Ni alloy at miscibility gap compositionlink 홍순익; Hong, Sun-Ig; et al, 한국과학기술원, 1981 |
15 | 7XXX계 알루미늄합금 대형단조재의 미세조직 및 강도학적 특성 개선을 위한 합금설계 최적화 연구 = Optimization of alloy design for improving the microstructural homogeneity and mechanical properties of 7XXX large aluminum alloy forgingslink 임성택; Lim, Seong-Taek; et al, 한국과학기술원, 2003 |
16 | A Study on the Cavity Nucleation Factor for the Creep-Fatigue Life Prediction 남수우, the 6th Conference on Mechanical Behaviors of Materials, pp.199 - 211, 1992 |
17 | A Study on the Characteristic of Low Cycle Fatigue in Al-Li Alloys 남수우, Advanced Aerospace Materials Symposium 91, pp.53 - 60, 1991 |
18 | A Study on the Characteristics of Cavitation and Surface Roughness Effect in High Temperature Fatigue Fracture 남수우, Proc. of the 4th Conference on Mechanical Behaviors of Materials, pp.135 - 141, 1990 |
19 | A Study on the M23C6 Carbide Precipitation Mode Change due to Grain Boundary Characteristic of Austenitic Stainless Steel 남수우, 재료강도심포지엄, pp.275 - 284, 1999 |
20 | AIAI 304 및 304L 스테인리스강의 입계 석출물이 크립-피로 상호작용에 미치는 영향 = Effects of grain boundary ppt on creep-fatigue interaction in AISI 304 and 304L stainless steellink 이제민; Lee, Je-Min; et al, 한국과학기술원, 1991 |
21 | AISI 304 스테인리스강에서 크리프-피로 손상의 초음파 비파괴 평가에 관한 연구 = The study on ultrasonic nondestructive evaluation of creep-fatigue damage in AISI 304 stainless steellink 이성식; Lee, Sung-Sik; et al, 한국과학기술원, 2000 |
22 | AISI 304L stainless steel 의 고온 저주파 피로거동에 관한 연구 = A study of high temperature low cycle fatigue behavior in AISI 304L stainless steellink 홍석경; Hong, Seok-Kyung; 남수우; 유진; et al, 한국과학기술원, 1986 |
23 | AISI 304L Stainless 강 용접부의 잔류응력, 미세조직, 용접결함이 low cycle fatigue 거동에 미치는 영향에 관한 연구 = Evaluation of weld defect, residual stress, and microstructural effect on the low cycle fatigue behaviour of AISI 304L austenitic stainless steel weldmentlink 김환태; Kim, Hwan-Tae; et al, 한국과학기술원, 1984 |
24 | AISI 304L 스탠레스 상의고온 저주파 피로시험시 피로 거동에 미치는 동적 변형 시효의 영향 = The effects of dynamic strain ageing on the low-cycle fatigue behaviors at high temperature for the AISI 304L stainless steellink 김동제; Kim, Dong-Jee; et al, 한국과학기술원, 1988 |
25 | AISI 304L 스테인리스 강의 고온 저주파 피로 거동에 미치는 인(P)의 영향 = Effect of phosphorus on the high temperature low cycle fatigue behavior in AISI 304L stainless steellink 윤영철; Yoon, Young-Cheol; et al, 한국과학기술원, 1991 |
26 | AISI 304L 스테인리스 강의 크리프 - 피로 상호작용에 미치는 인 (P) 의 영향 윤영철; 김중재; 위당문; 남수우, 대한금속·재료학회지, v.30, no.11, pp.1401 - 1406, 1992-01 |
27 | AISI 304L 스텐레스 강의 모재와 용접부의 고온저주파 피로 거동에 관한 연구 = A study on the high temperature low cycle fatigue behavoir in AISI 304L stainless steel base metal and weldmentlink 이수찬; Lee, Soo-Chan; et al, 한국과학기술원, 1988 |
28 | AISI 304L 스텐레스강의 고온 저주파 피로 시험시 균열생성과 균열 전파속도에 미치는 인장유지시간의 영향에 관한연구 = A study of effects of tensile hold time on the crack initiation and propagation rate on the high temperature low cycle fatigue in AISI 304L stainless steellink 이정근; Lee, Jung-Geun; et al, 한국과학기술원, 1989 |
29 | AISI 316 스테인리스강에서 발생하는 입계 serration에 영향을 미치는 인자 고찰 및 발생 기구 규명 = An investigation of the factors affecting the occurrence of the grain boundary serration and the grain boundary serration mechanism in AISI 316 stainless steellink 김기재; Kim, Ki-Jae; et al, 한국과학기술원, 2004 |
30 | AISI 321 스테인리스강의 입계 탄화물 석출 기구 규명 및 크리프-피로 특성 향상에 관한 연구 = An investigation of the precipitation mechanism of grain boundary carbides and the improvement of the creep-fatigue properties in AISI 321 stainless steellink 민경선; Min, Kyung-Seon; et al, 한국과학기술원, 2003 |
31 | AISI-304L stainless steel 모재와 용접부위의 static 및 cyclic creep 거동 = The static and cyclic creep behaviors of base and longitudinally welded AISI-304L stainless steellink 문영훈; Moon, Young-Hoon; et al, 한국과학기술원, 1985 |
32 | Al-3at%Mg 고용체 합금의 고온 크립변형시 변형기구 천이에 미치는 결정립도와 온도의 영향 = The effects of grain size and temperature on the transition behavior of an Al-3at%Mg alloy in power law creep regimelink 정병현; Jung, Byung-Hyun; et al, 한국과학기술원, 1991 |
33 | Al-4%Mg 고용체 합금의 반복 응력 크립 변형 중 결정립 방위가 입계 균열에 미치는 영향 = The effect of grain orientation on grain boundary cracking during cyclic creep of Al-4%Mg solid solution alloylink 박사인; Park, Sa-In; et al, 한국과학기술원, 1990 |
34 | Al-6Si-3Cu-(Fe)-(Mn)합금에서 Fe계 금속간화합물의 형상변화가 피로균열전파 거동에 미치는 영향 = Effects of morphology change of Fe base intermetallics on the fatigue crack propagation behavior in Al-6Si-3Cu-(Fe)-(Mn) Alloylink 박건욱; Park, Kun-Uk; et al, 한국과학기술원, 1997 |
35 | Al-Fe-V-Si/SiC 복합재료의 크??거동을 주관하는 전위 detachment의 온도의존성 = Temperature dependence of the dislocation detachment controlled creep behavior of an Al-Fe-V-Si/SiC compositelink 김인수; Kim, In-Soo; et al, 한국과학기술원, 1995 |
36 | Al-Li 2090 합금의 저주기 피로 특성 연구 = A study on the low cycle fatigue behavior in Al-Li 2090 alloylink 박현철; Park, Hyun-Cheol; et al, 한국과학기술원, 1991 |
37 | Al-Mg 고용체 합금에서 고온 반복크리ㅍ시 응력진폭이 입계변형거동에 미치는 영향에 관한 연구 = A study of effect of stress amplitude on the grain boundary deformation behavior during high temperature cyclic creep in an Al-Mg solid solution alloylink 나상호; Na, Sang-Ho; et al, 한국과학기술원, 1995 |
38 | Al-Mg 고용체 합금에서 고온 정적 및 반복응력 크립 변형시 발생되는 입계 변형 및 입계파괴 거동에 관한 연구 = An investigation of the grain boundary deformation and intergranular fracture during high temperature static and cyclic creep in an Al-Mg solid solution alloylink 이동헌; Lee, Dong-Heon; et al, 한국과학기술원, 1991 |
39 | Al-Mg-Si계열 합금의 인장성질에 미치는 Mn첨가와 균질화열처리의 영향 = Effect of Mn addition and homogenization heat treatment on the tensile properties in Al-Mg-Si alloy systemlink 박종환; Park, Jong-Hwan; et al, 한국과학기술원, 1996 |
40 | Al-Zn-Mg 계 합금에서 Mn-Dispersoid 가 기계적 변형에 미치는 영향과 무석출물대가 저주기 피로특성에 미치는 영향 = Effects of Mn-dispersoid on the deformation mechanism and precipitate free zone on the low cycle fatigue of and Al-Zn-Mg alloylink 박동석; Park, Dong-Seok; et al, 한국과학기술원, 1991 |
41 | Al-Zn-Mg 합금에서 Cr이 기계적 성질에 미치는 영향에 관한 연구 = A study on the effect of Cr on mechanical properties in an Al-Zn-Mg alloylink 전주매; Jeon, Ju-Mae; et al, 한국과학기술원, 1991 |
42 | Al-Zn-Mg-(Mn) 합금의 파괴인성에 미치는 Mn-dispersoid와 가공열처리의 영향 = Effect of Mn-dispersoid and thermomechanical treatment on the fracture toughness in Al-Zn-Mg-(Mn) alloylink 이덕희; Lee, Duck-Hee; et al, 한국과학기술원, 1995 |
43 | Al-Zn-Mg-Mn 합금의 저주기 피로 특성연구 = A study on low cycle fatigue in Al-Zn-Mg-Mn alloylink 유성태; You, Seoung-Tae; et al, 한국과학기술원, 1990 |
44 | Al-Zn-Mg-Mn 합금의 저주기 피로성질에 미치는 가공열처리의 영향에 관한 연구 = A study on the effect of thermomechanical treatment on the low cycle fatigue properties in AL-Zn-Mg-Mn alloylink 이호도; Lee, Ho-Do; et al, 한국과학기술원, 1993 |
45 | Al-Zn-Mg-Mn-Zr계 합금의 저주기 피로성질에 미치는 분위기의 영향 = Effect of environments on the low cycle fatigue in Al-Zn-Mg-Mn-Zr alloylink 조한서; Cho, Han-Seo; et al, 한국과학기술원, 1993 |
46 | Al-Zn-Mg-Zr-(Mn)합금에서 피로균열 전파거동에 미치는 무석출대와 Mn-분산상의 영향 = Effects of precipitate free zone and Mn-dispersoid on the fatigue crack propagation behavior in Al-Zn-Mg-Zr-(Mn) alloylink 조봉래; Jo, bong-Lae; et al, 한국과학기술원, 1994 |
47 | Al-Zn-Mg계 합금에서 Mn-분산상이 피로변형기구에 미치는 영향 = Effect of Mn-dispersoid on the fatigue mechanism in Al-Zn-Mg alloylink 김규철; Kim, Kyu-Cheol; et al, 한국과학기술원, 1997 |
48 | Al-Zn-Mg계 합금에서 상온 피로변형 중 하중 조건에 따른 Mn-분산상 주위에서의 전위 cross-slip거동 = The effect of loading condition on the dislocation cross-slip at the Mn-dispersoid during fatigue at low temperature in Al-Zn-Mg alloylink 우윤성; Woo, Yun-Sung; et al, 한국과학기술원, 1999 |
49 | AL-ZN-MG계 합금의 변형기구에 미치는 Mn-분산상의 영향 = Effects of MN-dispersoid on the deformation mechanism in AL-ZN-MG alloyslink 공병욱; Kong, Byeong-Ook; et al, 한국과학기술원, 1996 |
50 | Aluminium 다결성에서 결정립의 결정방위가 피로변형에 미치는 영향 = On the relation between crystal orientation and fatigue deformation in Al-polycrystallink 허성강; Hur, Sung-Kang; et al, 한국과학기술원, 1977 |
51 | An Interpretation of Creep Transient Behavior Based on the Internal Stress Concept 남수우, Proc. of the 9th Conference on Mechanical Behaviors of Materials, pp.335 - 342, 1995 |
52 | Atomic configuration model with emitting dislocations in the ${α_2}$ /γ by ${α_2}$ to γ phase transformation during creep deformation in the lamellar TiAl alloy = Lamellar TiAl 합금의 크리프시 ${α_2}$ 에서 γ로의 상변태와 계면에서의 방출전위를 위한 원자 단위의 모델링link Jung, He-Jin; 정혜진; et al, 한국과학기술원, 2003 |
53 | Bi계 초전도체에 있어서 반응경로에 따른 고온초전도상의 생성 및 성장에 관한 연구 = A study of formation and growth of 110K superconducting phase by the control of reaction pathway in the Bi-Sr-Ca-Cu-O systemlink 권상철; Kwon, Sang-Chul; et al, 한국과학기술원, 1996 |
54 | Characterization of the Cavity Nucleation Factor for Creep-Fatigue Life Prediction(II) 남수우, Proc. of the 8th Conference on Mechanical Behaviors of Materials, pp.125 - 133, 1994 |
55 | Cr-Mo-V 강의 피로 균열 생성과 고온 저주파 피로수명에 미치는 분위기의 영향에 대한 연구 = An investigation of the effect on the crack initiation and high temperature low-cycle fatigue life of Cr-Mo-V steellink 류재화; Ryu, Jae-Hwa; et al, 한국과학기술원, 1989 |
56 | Crack Growth and Life Prediction in Low Cycle Fatigye with Compressive Hold of Turbine Rotor Steels 남수우, Proc. of the 7th Conference on Mechanical Behaviors of Materials, pp.213 - 219, 1993 |
57 | Creep Properties of the TiAl Alloy Made by Hot Extrusion of a Blended Elemental Powder Mixture 남수우, Workshop on Gamma TiAl Alloys, pp.117 - 130, 1996 |
58 | Creep 강도에 UTS 가 미치는 영향과 반복 인장 하중이 Al-Zn 계의 creep 거동에 미치는 영향에 대한 연구 = Effect of UTS on creep strength and cyclic loading effect on the creep deformation in Al-Zn solid solutionlink 신동혁; Shin, Dong-Hyuk; et al, 한국과학기술원, 1979 |
59 | Creep-fatigue Behavior of Commercial and P-doped 304L Stainless Steel 남수우, 2nd conference on Mechanical Behaviors of Materials, pp.113 - 120, 1988 |
60 | Creep-Fatigue Interaction in AISI 4140 Steel 남수우, Proceedings of the First ROK-ROC Joint Workshop on Fracture of Metals, 1983 |