1 | 11%CrMoVNb 강의 크리프 성질에 미치는 템퍼링 열처리의 영향 = Effects of tempering heat treatment on the creep properties of a 11%CrMoVNb steellink 이영수; Lee, Young-Soo; et al, 한국과학기술원, 2001 |
2 | Analytical modeling to calculate the hardness of ultra-fine WC-Co cemented carbides Cha, Seung I; Lee, Kyong Ho; Ryu, Ho Jin; Hong, Soon-Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.489, no.1-2, pp.234 - 244, 2008-08 |
3 | Bilayer thickness effects on nanoindentation behavior of Ag/Ni multilayers Kang, BC; Kim, HY; Kwon, OY; Hong, Soon-Hyung, SCRIPTA MATERIALIA, v.57, pp.703 - 706, 2007-10 |
4 | Effect of alloyed Ti:Zr ratio on phase stability of Al66Mn9(Ti,Zr)(25) intermetallic compounds Han, SZ; Rho, BS; Lee, HyuckMo; Choi, Si-Kyung, INTERMETALLICS, v.4, no.3, pp.245 - 249, 1996-04 |
5 | Effect of the microstructureOf Si3N4 on the adhesion strength of TiN film on Si3N4 Kim, YG; Tatami, J; Komeya, K; Kim, Do Kyung, THIN SOLID FILMS, v.510, pp.222 - 228, 2006-07 |
6 | Effect of WC/TiC grain size ratio on microstructure and mechanical properties of WC-TiC-Co cemented carbides Lee, KH; Cha, SI; Kim, BK; Hong, Soon-Hyung, INTERNATIONAL JOURNAL OF REFRACTORY METALS HARD MATERIALS, v.24, no.1-2, pp.109 - 114, 2006-01 |
7 | Hardness and fracture toughness of ultra-rine WG-10Co-X cemented carbides prepared from nanocrystalline powders Cha, Seung I.; Hong, Soon Hyung, ZEITSCHRIFT FUR METALLKUNDE, v.96, pp.172 - 176, 2005-02 |
8 | Interfacial Reactions and Microstructures of Sn-0.7Cu-xZn Solders with Ni-P UBM During Thermal Aging Cho, Moon Gi; Kang, Sung K.; Seo, Sun-Kyoung; Shih, Da-Yuan; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.38, no.11, pp.2242 - 2250, 2009-11 |
9 | Mechanical properties of WC–10Co cemented carbides sintered from nanocrystalline spray conversion processed powders Cha, SI; Kim, BK; Hong, Soon-Hyung, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, v.19, no.6, pp.397 - 403, 2001 |
10 | Microstructure and mechanical properties of CNT/Ag nanocomposites fabricated by spark plasma sintering Daoush, Walid M.; Lim, Byung Kyu; Nam, Dong Heon; Hong, Soon-Hyung, JOURNAL OF EXPERIMENTAL NANOSCIENCE, v.9, no.6, pp.588 - 596, 2014-07 |
11 | Microstructure and mechanical properties of nanocrystalline WC-10Co cemented carbides Cha, SI; Hong, Soon-Hyung; Ha, GH; Kim, BK, SCRIPTA MATERIALIA, v.44, no.8-9, pp.1535 - 1539, 2001-05 |
12 | Microstructure and mechanical properties of ultra-fine WC/Co cemented carbides and binderless tungsten carbides = 초미립 초경합금의 미세조직과 기계적 성질 연구link Cha, Seung-Il; 차승일; et al, 한국과학기술원, 2002 |
13 | RF magnetron sputtering 증착공정에서 플라즈마 특성과 비정질 $CN_x$ 박막성질의 상관관계에 관한 연구 = A study on the correlation between the plasma and amorphous $CN_x$ film characteristics using RF magnetron sputteringlink 노기민; Roh, Ki-Min; et al, 한국과학기술원, 2011 |
14 | Spark plasma sintering behavior of nanocrystalline WC-10Co cemented carbide powders Cha, SI; Hong, Soon-Hyung; Kim, BK, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.351, pp.31 - 38, 2003-06 |
15 | Surface hardening of AISI 316L stainless steel using plasma carburizing Suh, BS; Lee, Won-Jong, THIN SOLID FILMS, v.295, no.1-2, pp.185 - 192, 1997-02 |
16 | The fabrication process and mechanical properties of SiCp/Al-Si metal matrix composites for automobile air-conditioner compressor pistons Lee, HS; Yeo, JS; Hong, Soon-Hyung; Yoon, DJ; Na, KH, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.113, no.1-3, pp.202 - 208, 2001-06 |
17 | Undercooling, Microstructures and Hardness of Sn-Rich Pb-Free Solders on Cu-xZn Alloy Under Bump Metallurgies Cho, Moon Gi; Seo, Sun-Kyoung; Lee, HyuckMo, MATERIALS TRANSACTIONS, v.50, no.9, pp.2291 - 2296, 2009-09 |
18 | WC-TiC-Co 초경합금의 미세조직 및 기계적성질 = Microstructure and mechanical properties of WC-TiC-Co cemented carbideslink 이경호; Lee, Kyong-Ho; et al, 한국과학기술원, 2003 |