| 1 | Analysis of the spatially distributed performance degradation of a polymer electrolyte membrane fuel cell stack Cho, Min Kyung; Lee, Dae-Nyung; Kim, Yi-Young; Han, Jonghee; Kim, Hyoung-Juhn; Cho, Eun-Ae; Lim, Tae-Hoon; et al, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.39, no.29, pp.16548 - 16555, 2014-10 |
| 2 | Binaphthyl-based molecular barrier materials for phosphoric acid poisoning in high-temperature proton exchange membrane fuel cells Jeong, Dong-Cheol; Mun, Bohyun; Lee, Hyekyung; Hwang, Seung Jun; Yoo, Sung Jong; Cho, Eun Ae; Lee, Yunmi; et al, RSC ADVANCES, v.6, no.65, pp.60749 - 60755, 2016 |
| 3 | Carbon nanotubes/aluminum composite as a hydrogen source for PEMFC Yu, Minkyu; Kim, MinJoong; Yoon, ByongYoung; Oh, Sekwon; Nam, Do-Hwan; Kwon, Hyuk-Sang, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.39, no.34, pp.19416 - 19423, 2014-11 |
| 4 | Characteristics of composite bipolar plates for polymer electrolyte membrane fuel cells Cho, EunAe; Jeon, US; Ha, HY; Hong, SA; Oh, IH, JOURNAL OF POWER SOURCES, v.125, no.2, pp.178 - 182, 2004-01 |
| 5 | Characteristics of membrane humidifiers for polymer electrolyte membrane fuel cells Park, SK; Cho, EunAe; Oh, IH, KOREAN JOURNAL OF CHEMICAL ENGINEERING, v.22, no.6, pp.877 - 881, 2005-11 |
| 6 | Degradation behavior of a polymer electrolyte membrane fuel cell employing metallic bipolar plates under reverse current condition Eom, KwangSup; Cho, EunAe; Nam, Suk-Woo; Lim, Tae-Hoon; Jang, Jong Hyun; Kim, Hyoung-Juhn; Hong, Bo Ki; et al, ELECTROCHIMICA ACTA, v.78, pp.324 - 330, 2012-09 |
| 7 | Design of ternary Al-Sn-Fe alloy for fast on-board hydrogen production, and its application to PEM fuel cell Eom, Kwang-Sup; Kim, Min-Joong; Oh, Se-Kwon; Cho, Eun-Ae; Kwon, Hyuk-Sang, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.36, no.18, pp.11825 - 11831, 2011-09 |
| 8 | Development of a high-energy-density portable/mobile hydrogen energy storage system incorporating an electrolyzer, a metal hydride and a fuel cell Han, Gwangwoo; Kwon, YongKeun; Kim, Joong Bae; Lee, Sanghun; Bae, Joongmyeon; Cho, Eunae; Lee, Bong Jae; et al, APPLIED ENERGY, v.259, 2020-02 |
| 9 | Development of CNTs reinforced metal matrix composite as a hydrogen source for PEMFC based auxiliary power unit = 고분자전해질 연료전지 기반 보조전원장치의 수소에너지원용 탄소나노튜브강화 금속기지 복합재료 개발link Yu, Min-Kyu; 유민규; et al, 한국과학기술원, 2016 |
| 10 | Effect of Nafion (R) gradient in dual catalyst layer on proton exchange membrane fuel cell performance Kim, KH; Kim, HJ; Lee, KY; Jang, JH; Lee, SY; Cho, EunAe; Oh, IH; et al, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.33, no.11, pp.2783 - 2789, 2008-06 |
| 11 | Effects of anode flooding on the performance degradation of polymer electrolyte membrane fuel cells Kim, Mansu; Jung, Namgee; Eom, KwangSup; Yoo, Sung Jong; Kim, Jin Young; Jang, Jong Hyun; Kim, Hyoung-Juhn; et al, JOURNAL OF POWER SOURCES, v.266, pp.332 - 340, 2014-11 |
| 12 | Effects of cathode open area and relative humidity on the performance of air-breathing polymer electrolyte membrane fuel cells Jeong, Seong Uk; Cho, Eun Ae; Kim, Hyoung-Jhun; Lim, Tae-Hoon; Oh, In-Hwan; Kim, Sung Hyun, JOURNAL OF POWER SOURCES, v.158, no.1, pp.348 - 353, 2006-07 |
| 13 | Effects of Ga-doping on the electrochemical properties of PtNi octahedral catalysts for oxygen reduction reaction in PEM fuel cells = 고분자 전해질 연료 전지용 산소환원반응을 위한 갈륨 도핑된 백금니켈계 양극 촉매의 전기화학적 특성에 관한 연구link Lim, JeongHoon; Cho, EunAe; et al, 한국과학기술원, 2017 |
| 14 | Effects of heat treatment time on electrochemical properties and electrode structure of polytetrafluoroethylene-bonded membrane electrode assemblies for polybenzimidazole-based high-temperature proton exchange membrane fuel cells Kim, Min-Joong; Jeong, Gi-Su; Eom, Kwang-Sup; Cho, Eun-Ae; Ryu, Joung-Wook; Kim, Hyoung-Juhn; Kwon, Hyuk-Sang, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.38, no.28, pp.12335 - 12342, 2013-09 |
| 15 | Effects of low-temperature nitridation on the electrical conductivity and corrosion resistance of 446M stainless steel as bipolar plates for proton exchange membrane fuel cell Lee, Seok-Hyun; Kim, Jong-Hee; Lee, Yun-Yong; Wee, Dang-Moon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.35, no.2, pp.725 - 730, 2010-01 |
| 16 | Effects of MEA fabrication method on durability of polymer electrolyte membrane fuel cells Prasanna, M.; Cho, EunAe; Lim, T.H.; Oh, I-H., ELECTROCHIMICA ACTA, v.53, no.16, pp.5434 - 5441, 2008-06 |
| 17 | Effects of Nb and Ti addition and surface treatments on the electrical conductivity of 316 stainless steel as bipolar plates for PEMFC Lee, Seok-Hyun; Kim, Jeong-Heon; Kim, Min-Chul; Chun, Dong-Hyun; Wee, Dang-Moon, JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, v.45, pp.44 - 50, 2007-01 |
| 18 | Effects of thermal oxi-nitridation on the corrosion resistance and electrical conductivity of 446M stainless steel for PEMFC bipolar plates Lee, Ki-Hyoung; Lee, Seok-Hyun; Kim, Jong-Hee; Lee, Yun-Yong; Kim, Young-Hwan; Kim, Min-Chul; Wee, Dang-Moon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.34, no.3, pp.1515 - 1521, 2009-02 |
| 19 | Fabrication and Characterization of High-activity Pt/C Electrocatalysts for Oxygen Reduction Lim, Borami; Kim, Joung Woon; Hwang, Seung Jun; Too, Sung Jong; Cho, Eun Ae; Lim, Tae-Hoon; Kim, Soo-Kil, BULLETIN OF THE KOREAN CHEMICAL SOCIETY, v.31, no.6, pp.1577 - 1582, 2010-06 |
| 20 | Feasibility of on-board hydrogen production from hydrolysis of Al-Fe alloy for PEMFCs Eom, KwangSup; Cho, EunAe; Kwon, Hyuk-Sang, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.36, no.19, pp.12338 - 12342, 2011-09 |
| 21 | Formation behavior of Cr-nitride by thermal nitridation in two-phase Cu-Cr alloy for application in metallic separators in PEMFCs Lee, Hye-Yeon; Lee, Seok-Hyun; Kim, Jeong-Heon; Kim, Min-Chul; Wee, Dang-Moon, JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, v.45, pp.602 - 608, 2007-11 |
| 22 | Gradient catalyst coating for a proton exchange membrane fuel cell operation under nonhumidified conditions Lee, S.-Y.; Kim, H.-J.; Kim, K.-H.; Cho, EunAe; Oh, I.-H.; Lim, T.-H., ELECTROCHEMICAL AND SOLID STATE LETTERS, v.10, no.10, pp.166 - 169, 2007 |
| 23 | High-performance membrane-electrode assembly with an optimal polytetrafluoroethylene content for high-temperature polymer electrolyte membrane fuel cells Jeong, Gisu; Kim, MinJoong; Han, Junyoung; Kim, Hyoung-Juhn; Shul, Yong-Gun; Cho, Eun Ae, JOURNAL OF POWER SOURCES, v.323, pp.142 - 146, 2016-08 |
| 24 | Investigation of oxygen gain in polymer electrolyte membrane fuel cells Prasanna, A; Ha, HY; Cho, EunAe; Hong, SA; Oh, IH, JOURNAL OF POWER SOURCES, v.137, no.1, pp.1 - 8, 2004-10 |
| 25 | Operation of a proton exchange membrane fuel cell under non-humidified conditions using a membrane-electrode assemblies with composite membrane and electrode Vengatesan, Singaram; Kim, Hyoung-Juhn; Lee, Sang-Yeop; Cho, EunAe; Ha, Heung Yong; Oh, In-Hwan; Lim, Tae-Hoon, JOURNAL OF POWER SOURCES, v.167, no.2, pp.325 - 329, 2007-05 |
| 26 | Operation of a proton-exchange membrane fuel cell under non-humidified conditions using thin cast Nafion membranes with different gas-diffusion media Vengatesan, S; Kim, HJ; Cho, EunAe; Jeong, SU; Ha, HY; Oh, IH; Hong, SA; et al, JOURNAL OF POWER SOURCES, v.156, no.2, pp.294 - 299, 2006-06 |
| 27 | PEMFC 금속재분리판용 316 스테인리스강의 전기전도성에 미치는 Ti, Nb 첨가효과 = Effects of Ti and Nb addition on the electrical conductivity of stainless steel 316 as a metallic separator for PEMFClink 이석현; Lee, Seok-Hyun; et al, 한국과학기술원, 2006 |
| 28 | Performance of a 1 kW-class PEMFC stack using TiN-coated 316 stainless steel bipolar plates Cho, EunAe; Jeon, US; Hong, SA; Oh, IH; Kang, SG, JOURNAL OF POWER SOURCES, v.142, no.1-2, pp.177 - 183, 2005-03 |
| 29 | Performance of proton-exchange membrane fuel cells using the catalyst-gradient electrode technique Prasanna, M; Cho, EunAe; Kim, HJ; Oh, IH; Lim, TH; Hong, SA, JOURNAL OF POWER SOURCES, v.166, no.1, pp.53 - 58, 2007-03 |
| 30 | Pt-Fe oxygen reduction reaction catalysts with enhanced durability = 백금·철 산소환원반응 촉매의 내구성 향상에 관한 연구link Jung, Chanwon; Lee, Hyuck Mo; et al, 한국과학기술원, 2017 |
| 31 | Size-controlled synthesis of Pt nanoparticles and their electrochemical activities toward oxygen reduction Kim, Joung Woon; Lim, Borami; Jang, Hyun-Sook; Hwang, Seung Jun; Yoo, Sung Jong; Ha, Jeong Soo; Cho, EunAe; et al, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.36, no.1, pp.706 - 712, 2011-01 |
| 32 | Thermally nitrided Cu-5.3Cr alloy for application as metallic separators in PEMFCs Lee, Hye-Youn; Lee, Seok-Hyun; Kim, Jeong-Heon; Kim, Min-Chul; Wee, Dang-Moon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.33, no.15, pp.4171 - 4177, 2008-08 |
| 33 | 고분자 전해질 연료전지에서의 Pt/Magneli phase, Pt/Ceria 촉매의 기능적 응용 = Functional applications of Pt/Magneli phase, Pt/ceria catalysts on polymer electrolyte membrane fuel cellslink 배종성; Bae, Jong-Sung; et al, 한국과학기술원, 2004 |
| 34 | 고분자전해질 연료전지 금속분리판용 446M 스테인리스강의 내식성과 전기전도성에 미치는 탄화처리 효과 = Effects of thermal carburization on the corrosion resistance and electrical conductivity of 446M stainless steel for PEMFC bipolar plateslink 이성우; Lee, Sung-Woo; et al, 한국과학기술원, 2010 |
| 35 | 고분자전해질연료전지 금속분리판용 스테인리스강의 전기전도도 및 부식저항성에 미치는 표면개질 효과 = Effects of surface modification on the electrical conductivity and the corrosion resistance of stainless steels as a metallic separator for polymer electrolyte membrane fuel celllink 이석현; Lee, Seok-Hyun; et al, 한국과학기술원, 2010 |
| 36 | 연료전지(PEMFC) 금속재분리판용 Cu/Cr 합금의 내부식성 향상을 위한 Cr-nitride 형성 = Formation of Cr-nitride for the improvement of corrosion resistance in Cu-Cr alloy as metallic separators in fuel cells(PEMFC)link 이혜연; Lee, Hye-Youn; et al, 한국과학기술원, 2007 |
