Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Subject Mechanical properties
Showing results 1 to 39 of 39
| Ag-Pd 합금의 조직 및 기계적 성질에 미치는 S와 Ir의 영향 = The effects of S and Ir on the structure and mechanical properties in Ag-Pd alloyslink 신승렬; Shin, Seung-Ryoul; et al, 한국과학기술원, 2000 |
| Carbon nanotube reinforced metal matrix nanocomposites via equal channel angular pressing Quang, P; Jeong, YG; Yoon, SC; Hong, SI; Hong, Soon-Hyung; Kim, HS, MATERIALS SCIENCE FORUM, v.534-536, no.PART 1, pp.245 - 248, 2007 |
| Carbon/phenolic 내열 복합재료의 기계적 특성 해석 = Analysis of mechanical properties of carbon/phenolic ablative compositeslink 김평완; Kim, Pyoung-Wan; et al, 한국과학기술원, 2000 |
| Comparison to mechanical properties of epoxy nanocomposites reinforced by functionalized carbon nanotubes and graphene nanoplatelets Cha, Jaemin; Kim, Joon Hui; Ryu, Seongwoo; Hong, Soon Hyung, COMPOSITES PART B-ENGINEERING, v.162, pp.283 - 288, 2019-04 |
| Diffusion induced grain-boundary migration and mechanical property improvement in Fe-doped alumina Rhee, YW; Lee, HY; Kang, Suk-Joong L, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.23, no.10, pp.1667 - 1674, 2003-09 |
| Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiBw/Ti-6Al-4V composites Koo, Min Young; Park, Jae Sung; Park, Min Kyu; Kim, Kyung Tae; Hong, Soon-Hyung, SCRIPTA MATERIALIA, v.66, no.7, pp.487 - 490, 2012-04 |
| Effect of deformation route on the mechanical properties of CP-Ti deformed by Equal Channel Angular Pressing (ECAP) Chon, S.H.; Liu, S.M.; Kim, T.N.; Park, Joong Keun, KEY ENGINEERING MATERIALS, v.345-346 I, no.0, pp.125 - 128, 2007 |
| Effect of oxidation of SiC particles on mechanical properties and wear behavior of SiCp/Al6061 composites Trinh, Pham Van; Lee, Junho; Phan Ngoc Minh; Doan Dinh Phuong; Hong, Soon Hyung, JOURNAL OF ALLOYS AND COMPOUNDS, v.769, pp.282 - 292, 2018-11 |
| Effect of pyrolyzed catecholamine polymers for concurrent enhancements of electrical conductivity and mechanical strength of graphene-based fibers Kim, Joonhui; Hwang, Hoseong; Yoo, Sung Chan; Seo, Hojin; Ryu, Seongwoo; Hong, Soon Hyung, COMPOSITES SCIENCE AND TECHNOLOGY, v.183, 2019-10 |
| Effect of TaB2 Addition on the Oxidation Behaviors of ZrB2-SiC Based Ultra-High Temperature Ceramics 이승준; 김도경, 한국재료학회지, v.20, no.4, pp.217 - 222, 2010-04 |
| Effects of Mo on the mechanical behavior of gamma/gamma'-strengthened Co-Ti-based alloys Im, Hye Ji; Lee, Subin; Choi, Won Seok; Makineni, Surendra Kumar; Raabe, Dierk; Ko, Won-Seok; Choi, Pyuck-Pa, ACTA MATERIALIA, v.197, no.15, pp.69 - 80, 2020-09 |
| Electrical and mechanical properties of carbon nanotube reinforced copper nanocomposites fabricated by electroless deposition process Daoush, Walid M; Lim, Byung K; Mo, Chan B; Nam, Dong H; Hong, Soon-Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.513-14, pp.247 - 253, 2009-07 |
| Enhanced mechanical properties of boron nitride nanosheet/copper nanocomposites via a molecular-level mixing process Yoo, Sung Chan; Kim, Joonhui; Lee, Wonki; Hwang, Jun Yeon; Ryu, Ho Jin; Hong, Soon Hyung, COMPOSITES PART B-ENGINEERING, v.195, 2020-08 |
| Enhanced mechanical properties of spark plasma sintered NiTi composites reinforced with carbon nanotubes Lee, Jun Ho; Hwang, Jaewon; Lee, Dongju; Ryu, Ho Jin; Hong, Soon-Hyung, JOURNAL OF ALLOYS AND COMPOUNDS, v.617, pp.505 - 510, 2014-12 |
| Enhanced microhardness of nanocrystalline carbon nanotube-reinforced Cu composite using planar shock-wave compaction Kim, HN; Chang, SN; Kim, Do Kyung; Chang, SN, SCRIPTA MATERIALIA, v.61, pp.871 - 874, 2009-11 |
| Enhanced microstructural stability of gamma/gamma ' -strengthened Co-Ti-Mo-based alloys through Al additions Im, Hye Ji; Choi, Won Seok; Ryou, KenHee; Seol, Jae Bok; Kang, Tae Hyeok; Ko, Won-Seok; Choi, Pyuck-Pa, ACTA MATERIALIA, v.214, no.1, pp.117011, 2021-08 |
| Equal channel angular pressing of carbon nanotube reinforced metal matrix nanocomposites Quang, P; Jeong, YG; Hong, Soon-Hyung; Kim, HS, KEY ENGINEERING MATERIALS, v.326-328 I, no.0, pp.325 - 328, 2006 |
| Excellent strength-ductility combination in nickel-graphite nanoplatelet (GNP/Ni) nanocomposites Borkar, Tushar; Mohseni, Hamidreza; Hwang, Junyeon; Scharf, Thomas W.; Tiley, Jaimie S.; Hong, Soon Hyung; Banerjee, Rajarshi, JOURNAL OF ALLOYS AND COMPOUNDS, v.646, pp.135 - 144, 2015-10 |
| Fabrication and characterization of ceramic reinforced tungsten matrix composites for ultraHigh temperature applications = 세라믹 입자로 강화된 텅스텐 복합재료의 제조 및 초고온 내열 구조재료 응용 연구link Umer, Malik Adeel; Malik Umer; et al, 한국과학기술원, 2015 |
| Fabrication and mechanical properties of carbon fiber/epoxy nanocomposites containing high loadings of noncovalently functionalized graphene nanoplatelets Kim, Joonhui; Cha, Jaemin; Chung, Bongjin; Ryu, Seongwoo; Hong, Soon H., COMPOSITES SCIENCE AND TECHNOLOGY, v.192, 2020-05 |
| Functionalization of carbon nanotubes for fabrication of CNT/epoxy nanocomposites Cha, Jaemin; Jin, Sunghwan; Shim, Jae Hun; Park, Chong Soo; Ryu, Ho Jin; Hong, Soon Hyung, MATERIALS AND DESIGN, v.95, pp.1 - 8, 2016-04 |
| High Temperature Thermo-mechanical Properties of HfC Reinforced Tungsten Matrix Composites Umer, Malik Adeel; Lee, Dong Ju; Ryu, Ho Jin; Hong, Soon Hyung, COMPOSITES RESEARCH, v.28, no.6, pp.366 - 371, 2015-12 |
| High throughput combinatorial analysis of mechanical and electrochemical properties of Li[NixCoyMnz]O-2 cathode Kim, DongHyuk; Shim, Hyung Cheoul; Yun, Tae Gwang; Hyun, Seungmin; Han, Seung Min J., EXTREME MECHANICS LETTERS, v.9, pp.439 - 448, 2016-12 |
| Improvement of modulus, strength and fracture toughness of CNT/Epoxy nanocomposites through the functionalization of carbon nanotubes Cha, Jaemin; Jun, Gwang Hoon; Park, Jong Kyoo; Kim, Jung Cheol; Ryu, Ho Jin; Hong, Soon Hyung, Composite Part B:Engineering, v.129, pp.169 - 179, 2017-07 |
| In-situ synthesis of TiC/Fe alloy composites with high strength and hardness by reactive sintering Lee, Junho; Lee, Dongju; Song, Myung Hoon; Rhee, Wonhyuk; Ryu, Ho Jin; Hong, Soon Hyung, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.34, no.8, pp.1397 - 1404, 2018-08 |
| Mechanical and wear properties of SiCp/CNT/Al6061 hybrid metal matrix composites Van Trinh, Pham; Lee, Junho; Kang, Byungchul; Minh, Phan Ngoc; Phuong, Doan Dinh; Hong, Soon Hyung, DIAMOND AND RELATED MATERIALS, v.124, 2022-04 |
| Mechanical Properties of 2-D Silica-Silica Continuous Fiber-reinforced Ceramic-matrix Composite Fabricated by Sol-Gel Infiltration Kim, Ha Neul; Kim, Dong Jun; Kang, Eul Son; Kim, Do Kyung, KOREAN JOURNAL OF MATERIALS RESEARCH, v.19, no.7, pp.391 - 396, 2009-07 |
| Mechanical properties of electrochemically lithiated Sn Hong, Chung Su; Han, Seung Min, EXTREME MECHANICS LETTERS, v.40, 2020-10 |
| Microstructural evolution of Si3N4 ceramics from starting powders with different alpha-to-beta ratios Lee, Hyun Min; Tatami, Junichi; Kim, Do Kyung, JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, v.124, no.8, pp.800 - 807, 2016-08 |
| Microstructure and mechanical properties of SiC-nanowire-augmented tungsten composites Lee, Dongju; Park, Heesub; Ryu, Ho Jin; Jeon, Seokwoo; Hong, Soon-Hyung, JOURNAL OF ALLOYS AND COMPOUNDS, v.509, no.37, pp.9060 - 9064, 2011-09 |
| Preparation of high-performance transparent glass-fiber reinforced composites based on refractive index-tunable epoxy-functionalized siloxane hybrid matrix Jang, Junho; Im, Hyeon-Gyun; Lim, DaeSeop; Bae, Byeong-Soo, COMPOSITES SCIENCE AND TECHNOLOGY, v.201, pp.108527, 2021-01 |
| Synergistic outstanding strengthening behavior of graphene/copper nanocomposites Yoo, Sung Chan; Lee, Junho; Hong, Soon Hyung, COMPOSITES PART B-ENGINEERING, v.176, 2019-11 |
| The effect of HfC content on mechanical properties HfC-W composites Lee, Dong Ju; Umer, Malik Adeel; Ryu, Ho Jin; Hong, Soon-Hyung, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, v.44, pp.49 - 53, 2014-05 |
| Thermally driven changes in the microstructure and mechanical properties of martensitic 15-5 precipitation-hardened stainless steel during directed energy deposition Im, Hye Ji; Ryou, Kenhee; Kang, Tae Hyeok; Jimbo, Shotaro; Nambu, Shoichi; Han, Jeongho; Choi, Pyuck-Pa, ADDITIVE MANUFACTURING, v.74, 2023-07 |
| Ti-6Al-4V 합금의 미세조직 제어와 동적변형 특성 = Microstructure control and dynamic deformation properties of Ti-6Al-4V alloylink 김진영; Kim, Jin-Young; et al, 한국과학기술원, 2008 |
| Upgrading the mechanical properties of marine structural steel by enhancement of acicular ferrite formation Amer, AE; Hong, Soon Hyung; Shash, AY, MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, v.53, no.4, pp.509 - 516, 2022-04 |
| 솔-젤 하이브리드 재료를 이용한 유리섬유 강화 투명복합체 제조 = Fabrication of Transparent glass fiber-reinforced composite using sol-gel hybrid materiallink 임대섭; Lim, Dae-Seop; et al, 한국과학기술원, 2012 |
| 오스테나이트계 Fe-Mn-Cr-Al-C 합금에서 변형유기상변태가 소성변형거동 및 기계적성질에 미치는 영향 = Effect of strain-induced phase transformation on the plastic deformation behavior and mechanical properties in austenitic Fe-Mn-Cr-Al-C alloyslink 오방원; Oh, Bang-Won; et al, 한국과학기술원, 1995 |
| 티타늄 금속복합재료에서 고상-기상 반응공정에 의한 분산강화입자의 in-situ 생성과 성장 = In-situ formation and growth of particulate reinforcements in titanium metal matrix composite by solid-gas reaction processinglink 김용진; Kim, Yong-Jin; et al, 한국과학기술원, 2000 |
Discover
Open Access
Date issued
- 2,068 2020 - 2024
- 6,673 2010 - 2019
- 5,356 2000 - 2009
- 3,582 1990 - 1999
- 982 1980 - 1989