Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Author Lee, S
Showing results 1 to 35 of 35
| A novel process for fabrication of SnO2-based thick film gas sensors Lee, S; Lee, GG; Kim, J; Kang, Suk-Joong L, SENSORS AND ACTUATORS B-CHEMICAL, v.123, pp.331 - 335, 2007-04 |
| Analysis of field emission operation-induced defects in carbon nanotube via a combination of field emission measurement and Raman spectroscopy Lee, Y; Lee, S; Jeon, Duk Young, 19th International Vacuum Nanoelecronics Conference and 50th International Field Emission Symposium, IVNC and IFES 2006, pp.79 - 80, 2006-07-17 |
| Control of surface carburization and improvement of dynamic fracture behavior in tungsten heavy alloys Jung, SW; Lee, S; Kim, EP; Noh, JW; Baek, WH; Kang, Suk-Joong L, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.33, no.4, pp.1213 - 1219, 2002 |
| Correlation of microstructure with dynamic deformation behavior and penetration performance of tungsten heavy alloys fabricated by mechanical alloying Kim, DK; Lee, S; Ryu, Ho Jin; Hong, Soon-Hyung; Noh, JW, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.31, no.10, pp.2475 - 2489, 2000-10 |
| Corrosion resistance of nitrogen-implanted Zircaloy-4 in high-temperature water Lee, S; Park, C; Kwon, Hyuk-Sang; Choi, B, JOURNAL OF NUCLEAR MATERIALS, v.282, no.2-3, pp.223 - 231, 2000-12 |
| Dynamic deformation behavior of an oxide-dispersed tungsten heavy alloy fabricated by mechanical alloying Park, S; Kim, DK; Lee, S; Ryu, Ho Jin; Hong, Soon-Hyung, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.32, no.8, pp.2011 - 2020, 2001-08 |
| Effect of degassed elements on the degradation behavior of carbon nanotube cathodes in sealed field emission-backlight units Lee, S; Jeon, DukYoung, APPLIED PHYSICS LETTERS, v.88, no.6, pp.174 - 185, 2006-02 |
| Effect of environmental elements on field emission properties of CNT tips sealed in FE-BLUs Lee, S; Jeon, Duk Young, Technical Digest of the 18th International Vacuum Nanoelectronics Conference, IVNC 2005, v.2005, pp.346 - 347, 2005-07-10 |
| Effect of surface carburization on dynamic deformation and fracture of tungsten heavy alloys Jung, SW; Kim, DK; Lee, S; Noh, JW; Kang, Suk-Joong L, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.30, no.8, pp.2027 - 2035, 1999-08 |
| Electron-beam-induced transition aluminas from aluminum trihydroxide Kim, Young Min; Lee, S; Kim, YS; Oh, SH; Kim, YJ; Lee, JeongYong, SCRIPTA MATERIALIA, v.59, pp.1022 - 1025, 2008-11 |
| Epoxy/BaTiO (SrTiO3) Composite Films and Pastes for High Dielectric Constant and Low Tolerance Embedded Capacitors in Organic Substrates Paik, Kyung-Wook; Hyun, JG; Lee, S; Jang, KW, Pan Pacific Microelectronics Symposium & Tabletop Exhibition, pp.0 - 0, 2006-01 |
| Epoxy/BaTiO3 (SrTi03) composite films and pastes for high dielectric constant and low tolerance embedded capacitors in organic substrates Paik, Kyung-Wook; Hyun, JG; Lee, S; Jang, KW, ESTC 2006 - 1st Electronics Systemintegration Technology Conference, pp.794 - 801, 2006-09-05 |
| Epoxy/BaTiO3 (SrTiO3) composite films for high dielectric constant and low tolerance embedded capacitors fabrication in organic substrates Paik, Kyung-Wook; Cho, SD; Hyun, JG; Lee, S; Kim, H; Kim, J, 2005 10th International Symposium on Advanced Packaging Materials: Processes, Properties and Interfaces, v.2005, pp.227 - 232, 2005-03-16 |
| Epoxy/BaTiO3 composite films and pastes for high dielectric constant and low-tolerance embedded capacitors fabrication in organic substrates Cho, SD; Jang, KW; Hyun, JG; Lee, S; Paik, Kyung-Wook; Kim, HS; Kim, Joungho, IEEE TRANCSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, v.28, no.4, pp.297 - 303, 2005-10 |
| Evolution of microstructure characteristics during the electron-beam-induced phase transition of aluminum trihydroxide Kim, YM; Kim, YS; Lee, S; Kim, YJ; Lee, JeongYong, SCRIPTA MATERIALIA, v.61, pp.572 - 575, 2009-09 |
| Fabrication and characterization of embedded capacitors in printed circuit boards using B-stage epoxy/BaTiO3 composite embedded capacitor films (ECFs) Lee, S; Hyun, JG; Pak, JS; Lee, H; Jeon, HS; Paik, Kyung-Wook, 2008 58th Electronic Components and Technology Conference, ECTC, pp.742 - 746, 2008-05-27 |
| Fabrication and characterization of Epoxy/BaTiO3 composite capacitor films for high frequency behaviors Hyun, JG; Lee, S; Paik, Kyung-Wook, International Conference on Electronic Materials and Packaging 2007, EMAP 2007, 123, 2007-11-19 |
| Frequency and temperature dependence of dielectric constant of epoxy/BaTiO3 composite Embedded Capacitor Films (ECFs) for organic substrate Hyun, JG; Lee, S; Cho, SD; Paik, Kyung-Wook, 55th Electronic Components and Technology Conference, ECTC, pp.1241 - 1247, IEEE, 2005-05-31 |
| Frequency behavior of embedded epoxy/SrTiO3 composite capacitor materials Lee, S; Hyun, JG; Park, H; Kim, Joungho; Paik, Kyung-Wook, The 55th Electronic Components and Technology Conference, ECTC, pp.1222 - 1227, IEEE, 2005-05-31 |
| Impact and dynamic deformation behavior of mechanically alloyed tungsten heavy alloy Ryu, Hojin; Hong, Soon-Hyung; Kim, DK; Lee, S, METALS AND MATERIALS INTERNATIONAL, v.4, no.3, pp.367 - 371, 1998-01 |
| Influences of laser surface alloying with niobium (Nb) on the corrosion resistance of Zircaloy-4 Lee, S; Park, C; Lim, Y; Kwon, Hyuk-Sang, JOURNAL OF NUCLEAR MATERIALS, v.321, no.2-3, pp.177 - 183, 2003-09 |
| Low temperature burnable carbon nanotube paste component for carbon nanotube field emitter backlight unit Lee, S; Im, WB; Kang, JH; Jeon, DukYoung, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, v.23, no.2, pp.745 - 748, 2005-03 |
| Low temperature burnable CNT paste component for CNT-Field Emitter backlight unit Lee, S; Jeon, Duk Young, Technical Digest of the 17th International Vacuum Nanoelectronics Conference, IVNC 2004, pp.124 - 125, 2004-07-11 |
| Mechanical properties and structural stability of perovskite-type, oxygen-permeable, dense membranes Lee, S; Woo, SK; Lee, KS; Kim, Do Kyung, DESALINATION, v.193, pp.236 - 243, 2006-05 |
| Multi-functional epoxy/SrTiO3 ceramic powder Embedded Capacitor Films(ECFs) for organic substrates Lee, S; Hyun, JG; Chung, CK; Paik, Kyung-Wook, 2006 8th Electronics Packaging Technology Conference, EPTC, pp.549 - 552, 2006-12-06 |
| Multi-walled carbon nanotube/nanocrystalline copper nanocomposite film as an interconnect material Yoo, JJ; Song, JY; Yu, Jin; Lyeo, HK; Lee, S; Hahn, JH, 2008 58th Electronic Components and Technology Conference, ECTC, pp.1282 - 1286, 2008-05-27 |
| Origin of PL intensity increase of CaMgSi2O6 : Eu2+ phosphor after baking process for PDPs application Im, WB; Kang, JH; Lee, DC; Lee, S; Jeon, DukYoung; Kang, YC; Jung, KY, SOLID STATE COMMUNICATIONS, v.133, no.3, pp.197 - 201, 2005-01 |
| Origin of PL intensity increase of CaMgSi2O6:Eu2+ phosphor after baking process for PDPs application Jeon, DukYoung; Im, WB; Kang, JH; Lee, DC; Lee, S, Kyoto Joint Symposium, 2004 |
| Oxygen-permeating property of LaSrBFeO3 (B=Co, Ga) perovskite membrane surface-modified by LaSrCoO3 Lee, S; Lee, KS; Woo, SK; Kim, JW; Ishihara, T; Kim, Do Kyung, SOLID STATE IONICS, v.158, pp.287 - 296, 2003-03 |
| Reliability enhancement of embedded capacitors in printed circuit boards using b-stage epoxy/batio3 composite embedded capacitor films (ECFS) Lee, S; Jang, JM; Lee, WS; Paik, Kyung-Wook, 2009 59th Electronic Components and Technology Conference, ECTC 2009, pp.771 - 776, 2009-05-26 |
| Synthesis of low temperature burnable P(MMA-co-BMA) binder and control of carbon residue during baking process of BAM phosphor paste Kim, SW; Lee, S; Im, WB; Lee, JS; Jang, HS; Yoo, HS; Jeon, Duk Young, 14th International Display Workshops, IDW '07, pp.877 - 879, 2007-12-05 |
| The effect of grain boundary phase on contact damage resistance of alumina ceramics Kim, JH; Lee, S; Lee, KS; Kim, Do Kyung, JOURNAL OF MATERIALS SCIENCE, v.39, pp.7023 - 7030, 2004-12 |
| The effects of surface treatment for ZnS : Ag,Cl using a combination of stirring and ultrasonication in KOH solutions Lee, DC; Bukesov, SA; Lee, S; Kang, JH; Jeon, DukYoung; Park, DH; Kim, JY, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.151, no.11, pp.227 - 231, 2004 |
| The effects of surface treatment using stirring & ultrasonication in KOH solutions for blue phosphor ZnS:Ag,Cl Jeon, Duk Young; Lee, DC; Park, DH; Lee, S; Kim, JY, 2003 International Display Manufacturing Conference & FPD expo, pp.703 - 706, 2003 |
| White light emission from a carbon nanotube field emitter backlight unit using two phosphors system Jang, HS; Kang, JH; Lee, S; Jeon, Duk Young, 13th International Display Workshops, IDW '06, pp.1825 - 1828, 2006-12-06 |
Discover
Open Access
Date issued
- 2,248 2020 - 2024
- 6,675 2010 - 2019
- 5,356 2000 - 2009
- 3,582 1990 - 1999
- 982 1980 - 1989