Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 341 to 360 of 2223

341
Characteristic improvements of glass-fabric reinforced hybrimer film for flexible display substrate = 투명 플렉시블 디스플레이 기판용 유리섬유 강화 하이브리머 필름 특성 개선link

Lee, Yung; Bae, Byeong Soo; et al, 한국과학기술원, 2019

342
Characteristic of siloxane hybrid material cured by thiol-ene reaction and application to transparent composite film = 싸이올-엔 반응 경화 실록산 하이브리드 재료의 특성 및 투명 복합체 응용link

Park, Chan-Hui; Bae, Byeong-Soo; et al, 한국과학기술원, 2020

343
Characterization of $TiO_2$ thin films formed by plasma enhanced atomic layer deposition = PEALD법을 이용한 $TiO_2$ 박막 증착 및 특성에 관한 연구link

Park, Pan-Kwi; 박판귀; et al, 한국과학기술원, 2002

344
Characterization of $ZnS-AgInS_2$ quantum dot synthesized via light-material interaction = 광 물질 상호작용을 이용한 비카드뮴계 $ZnS-AgInS_2$ 양자점 합성 및 특성평가link

Kim, Mina; Lee, Keon Jae; et al, 한국과학기술원, 2018

345
Characterization of doped BST thin films for microwave tunable device applications = 마이크로파 동조 디바이스 응용을 위한 도핑된 BST박막의 특성평가에 관한 연구link

Kim, Hyun-Suk; 김현석; et al, 한국과학기술원, 2003

346
Characterization of highly preferred PZT thin films on LSCO and LNCO electrodes prepared in low temperature = 저온에서 얻어진 전도성 산화물 전극 LSCO와 LNCO 위에 증착된 PZT 박막의 특성 평가link

Kim, Il-Doo; 김일두; et al, 한국과학기술원, 1999

347
Characterization of microstructure and mechanical properties of complex phase steel = 복합조직강의 미세조직 및 기계적 특성평가link

Guo Xiaodong; Jeon, Seok-Woo; et al, 한국과학기술원, 2011

348
Characterization of Ni stressor layer based device exfoliation process for flexible memory fabrication = 유연메모리 제작을 위한 니켈 응력층 기반 소자 박리 공정 특성 평가link

Park, Gyeong Cheol; Lee, Keon Jae; et al, 한국과학기술원, 2019

349
Characterization of the kinetic properties of La1-xSrxMnO3-δ for solar thermochemical fuel production = 태양 기반 열화학적 연료 생산 반응에서$ La_{1-x}Sr_xMnO_{3-δ}$ 물질의 반응속도론적 특성 분석link

Kim, YeonJu; Jung, WooChul; et al, 한국과학기술원, 2017

350
Characterization of thermal conductivity and mechanical property of pressureless sintered silicon nitride ceramics = 상압 소결 질화규소 세라믹의 열전도성 및 기계적 특성 평가 연구link

공정훈; Kim, Do Kyung; et al, 한국과학기술원, 2018

351
Chemical vapor transport법에 의해 제조된 $Sn_2P_2S_6$ 강유전체 재료의 photovoltaic 특성 = Photovoltaic property of $Sn_2P_2S_6$ ferroelectric material prepared by chemical vapor transport methodlink

조영우; Cho, Young-Woo; et al, 한국과학기술원, 2000

352
Chitosan-templated nanocatalysts on one-dimensional metal oxide for chemical sensor = 키토산 희생층 템플릿에 기인한 나노촉매가 기능화된 1차원의 금속산화물 감지소재층 및 이를 활용한 센서에 관한 연구link

Jeong, Yong Jin; Kim, Il-Doo; et al, 한국과학기술원, 2019

353
CM247 LC 일방향응고 초내열합금의 미세조직이 고온기계적성질에 미치는 영향 = The effects of microstructure on the high temperature mechanical properties in directionally solidified CM247LC superalloylink

이종훈; Lee, Jong-Hoon; et al, 한국과학기술원, 1987

354
CMP의 기계적 공정 변수가 반도체 표면 평탄화의 균일도에 미치는 영향 = A effect of the mechanical factors on the uniformity in the chemical-mechanical polishing(CMP) of $SiO_2$ thin filmlink

김우찬; Kim, Woo-Chan; et al, 한국과학기술원, 1996

355
Co 액상 내에 공존하는 (Ti,W)C 입자와 WC 입자의 성장 거동 = Growth behavior of(Ti,W)C and WC grains in a Co matrixlink

윤병권; Yoon, Byung-Kwon; et al, 한국과학기술원, 2004

356
Co 액상내에서 NbC 입자의 성장 기구 = Growth mechanism of NbC grains in Co liquidlink

문학성; Moon, Hak-Sung; et al, 한국과학기술원, 1999

357
Co-Cr/Cr 박막의 열처리에 따른 자기적 성질의 변화 = The effects of heat-treatments on the magnetic properties of Co-Cr-Cr thin filmslink

정우석; Cheong, Woo-Seock; et al, 한국과학기술원, 1994

358
Co-Cu 계에서 용질원자의 확산이 계면이동에 미치는 영향에 관한 연구 = The effect of solute diffusion on interface migration in Co-Cu alloylink

김진곤; Kim, Jin-Kon; et al, 한국과학기술원, 1987

359
Co-Cu 합금의 액상소결에서 고립기공의 소멸과정 = Elimination process of isolated pores during liquid phase sintering of Co-Cu alloylink

유상기; Yu, Sang-Gi; et al, 한국과학기술원, 1984

360
Co-free maraging 강에서 열처리가 미세조직 및 기계적 성질에 미치는 영향 = The effects of heat treatments on microstructures and mechanical properties in Co-free maraging steelslink

김교성; Kim, Gyo-Sung; 김영길; 임호빈; et al, 한국과학기술원, 1985

rss_1.0 rss_2.0 atom_1.0