1561 | 구조 변형에 의한 트리페닐아민계 유기 발광 염료의 발광특성 조절 및 이를 이용한 white LED 구현에 관한 연구 = A study of the modification on emission properties of light emitting triphenylamine derivatives by structural changes and the fabrication of white LED using the light emitting dyeslink 황석환; Hwang, Seok-Hwan; et al, 한국과학기술원, 2010 |
1562 | 국부적이며 연속적인 열처리를 이용한 방향성을 지닌 고품질 그래핀 제조 및 응용 = Synthesis of graphene with oriented domains using local and sequential heating CVDlink 오세란; Oh, Se-Ran; et al, 한국과학기술원, 2013 |
1563 | 국산명반석으로부터 고순도의 미세한 $Al_2O_3$의 제조 = Preparation of high purity and fine $Al_2O_3$ from Korean alunitelink 이수영; Lee, Soo-Young; 김종희; 변수일; et al, 한국과학기술원, 1978 |
1564 | 규소분말의 질화에 미치는 수소의 영향 = Effect of $H_2$ on the nitridation of silicon powderlink 손용배; Son, Yong-Bae; et al, 한국과학기술원, 1982 |
1565 | 균일침전법에 의한 단분산 구형의 $Y_2O_3:Eu^{3+}$ 형광체 합성 및 발광특성 = Synthesis of monodisperse spherical $Y_2O_3:Eu^{3+}$ phosphor by homogeneous precipitation method and its photoluminescent propertieslink 유형선; Yoo, Hyoung-Sun; et al, 한국과학기술원, 2006 |
1566 | 균질화 열처리가 Boron 규소강판에 미치는 영향 = Effects of normalizing in boron silicon-ironlink 이희균; Lee, Hee-Kyoun; et al, 한국과학기술원, 1983 |
1567 | 그래핀 산화물 박막 기반의 저항변화 메모리에서의 금속 전극의 영향 = Effects of metal electrodes on graphene oxide thin film based resistive switching memorylink 김성규; Kim, Sung-Kyu; et al, 한국과학기술원, 2012 |
1568 | 그래핀 옥사이드 수계 분산 시스템의 액정 거동 분석 = Liquid crystalline behavior of graphene oxide aqueous dispersionlink 김지은; Kim, Ji-Eun; et al, 한국과학기술원, 2010 |
1569 | 그래핀의 표면상 젤화 기법을 통한 다공성 그래핀/탄소나노튜브 선형 슈퍼캐패시터에 관한 연구 = Highly porous reduced graphene oxide/carbon nanotube fiber supercapacitor via interfacial gelationlink 오정재; Oh, Jung Jae; et al, 한국과학기술원, 2016 |
1570 | 극박 동박 제조 공정중 Cr 도금 표면이 Cu/Cr층의 Cu 전착 거동에 미치는 영향 = A study on the effects of the Cr electrodeposition layer on the Cu electrodeposit behavior of the Cu/Cr layer for UTC processlink 김기태; Kim, Ki-Tae; et al, 한국과학기술원, 2000 |
1571 | 극저온용 Fe-(25, 30)Mn-12Cr-xAl-C계 합금에서 Al함량 변화가 상변화 및 저온변형 특성에 미치는 영향 = The effects of Al contents on phase transformation and low temperature deformation characteristics in cryogenic Fe-(25, 30)Mn-12Cr-xAl-C alloyslink 한영수; Han, Young-Soo; et al, 한국과학기술원, 1994 |
1572 | 극저온용 Fe-30Mn-Al-Cr-0.15C 강에서 Al과 Cr이 미세조직 및 기계적 성질에 미치는 영향 = Effects of Al and Cr on the microstructure and mechanical properties of cryogenic Fe-30Mn-Al-Cr-0.15C steelslink 오방원; Ohr, Bang-Weon; et al, 한국과학기술원, 1987 |
1573 | 극저온용Fe-19Mn-(5,13)Cr-Al-0.2C-0.5Si 강에서 Al과 Cr이 상변화 및 기계적 성질에 미치는 영향 = Effects of Al and Cr on the phase transformation and mechanical properties of cryogenic Fe-19Mn-(5,13)Cr-Al-0.2C-0.5Si steelslink 조순진; Cho, Sun-Jin; et al, 한국과학기술원, 1993 |
1574 | 극저탄소강에서 합금원소 Phosphorus 와 boron이 hydrogen trapping 현상에 미치는 영향 = The effect of alloying elements (Pand B) on the hydrogen trapping phenomena in extra low carbon steellink 정우인; Chung, U-In; et al, 한국과학기술원, 1986 |
1575 | 극한지 송유관용 저탄소 고장력강 개발에 관한 연구 = Development of a low carbon-manganese HSLA steel for arctic linepipe applicationslink 김태웅; Kim, Tai-Ung; et al, 한국과학기술원, 1985 |
1576 | 글리콜라이드와 ε-카프로락톤 공중합체의 합성과 특성 = Synthesis and properties of glycolide and ε- caprolactone copolymerslink 백지원; Pack, Ji-Won; et al, 한국과학기술원, 1998 |
1577 | 금속 산화물 나노 입자를 이용한 그라핀 기반의 Pseudo-capacitor 개발에 대한 연구 = A study on graphene based pseudo-capacitor with metal oxide nanopaticleslink 변세기; Byun, Se-Gi; et al, 한국과학기술원, 2012 |
1578 | 금속 알콕사이드로부터 제조한 $Al_2O_3$-15vol% $ZrO_2$세라믹스의 분말특성 및 소결거동에 관한 연구 = Powder characteristics and sintering behavior of $Al_2O_3$-15vol% $ZrO_2$ ceramics prepared from metal alkoxideslink 박혜련; Park, Hye-Lyun; et al, 한국과학기술원, 1988 |
1579 | 금속 전구체와 $Cu_2Se$를 동시에 스퍼터링하여 만든 전구체와 CIGS 박막의 미세구조 변화 연구 = Microstructure of $Cu(In,Ga)Se_2$ thin film by co-sputtering $Cu_{40}In_{60}$, $Cu_{50}Ga_{50}$ and $Cu_2Se$ precursorslink 이종철; Lee, Jong-Chul; et al, 한국과학기술원, 2009 |
1580 | 금속 전도 층에 따른 무전해 Ni(P)의 morphology 변화가 Black pad 현상에 미치는 영향에 관한 연구 = Effects of Nickel-Phosphorus morphology on Black pad phenomena using conductive metal layerslink 김경덕; Kim, Kyoung-Doc; et al, 한국과학기술원, 2013 |
1581 | 금속-비금속 화합물의 Poisson 비와 이온결합성과의 상관관계 = Corrosion between poisson's ratios and ionicities of metal-nonmetal compoundslink 서주원; Soh, Ju-Won; et al, 한국과학기술원, 1993 |
1582 | 금속-유기 화학 기상 증착을 활용한 저 차원 반도체 물질 합성 = Synthesis of low-dimensional semiconducting materials via metal-organic chemical vapor depositionlink 조기원; 강기범; et al, 한국과학기술원, 2021 |
1583 | 금속간화합물 $Ni_3Al$ 촉매박판재의 메탄올분해반응에 미치는 스팀첨가효과 = Effects of $H_2O$ addition on catalytic reaction in methanol decomposition over intermetallic compound $Ni_3Al$ Foilslink 장준혁; Jang, Jun-Hyuk; et al, 한국과학기술원, 2007 |
1584 | 금속간화합물 TiAl의 고온산화거동 및 기계적성질에 미치는 Al-21Ti-23Cr 코팅의 효과 = Effects of Al-21Ti-23Cr film on high temperature oxidation behavior and mechanical properties of TiAllink 이호년; Lee, Ho-Nyun; et al, 한국과학기술원, 1997 |
1585 | 금속간화합물 TiAl의 고온산화거동 및 기계적성질에 미치는 Yttrium 첨가 $L1_2 (Al,Cr)_3Ti$ 코팅의 효과 = Effects of Y-doped $L1_2 (Al,Cr)_3Ti$ coatings on high-temperature oxidation behavior and mechanical properties of TiAl intermetallic compoundslink 박진민; Park, Zin-Min; et al, 한국과학기술원, 1998 |
1586 | 금속간화합물 TiAl의 미세조직 및 기계적 성질에 미치는 탄소 및 질소 첨가의 영향 = Effects of carbon and nitrogen additions on microstructure and mechanical properties of TiAl intermetallicslink 윤주환; Yun, Ju-Hwan; et al, 한국과학기술원, 1996 |
1587 | 금속복합재료용 고부피분율 SiC 예비성형체의 제조공정 및 특성 = Fabrication processes and properties of high volume fraction SiC preforms for metal matrix compositelink 전경윤; Jeon, Kyung-Yun; et al, 한국과학기술원, 1998 |
1588 | 금속수소화합물을 이용하는 화학열펌프의 특성에 관한 연구 = A study on the characteristics of chemical heat pump using metal hydrideslink 권기원; Kwon, Kee-Won; et al, 한국과학기술원, 1990 |
1589 | 급냉응고/분말야금법으로 제조된 Al-Fe-V-Si-Ti-W 합ㅍ의 크립거동 및 미세조직 분석 = Microstructure and creep behavior of a rapidly solidified Al-Fe-V-Si-Ti-W alloylink 최상우; Choi, Sang-Woo; et al, 한국과학기술원, 1995 |
1590 | 급냉응고/분말야금법으로 제조한 Al-Fe-V-Si-Ti-W 합금의 고온크리ㅍ거동 및 미세조직의 열적 안정성에 관한 연구 = A study on the elevated temperature creep behavior and microstructural stability of RS/PM Al-Fe-V-Si-Ti-W alloylink 오승철; Oh, Seung-Chul; et al, 한국과학기술원, 1995 |
1591 | 급냉응고된 Al-Ti-V-Zr 합금에서 $L1_2$ 석출물의 조대화거동에 관한 연구 = A study on the coarsening behavior of the $L1_2$ precipitate in rapid-solidified Al-Ti-V-Zr alloyslink 정석철; Chung, Seog-Chul; et al, 한국과학기술원, 1994 |
1592 | 급냉후 뜨임처리한 마르텐사이트강 (U.S.steel "T-1" alloy )에서 몰리브텐을 텅그스텐으로 대체할 경우 강의 기계적 성질에 미치는 영향 = Effects of substituting W for Mo on mechanical properties in a quenched and temperated martensitic steel (U.S. steel "T-1" alloy)link 강석봉; Kang, Suck-Bong; et al, 한국과학기술원, 1981 |
1593 | 급속열산화법을 이용한 게이트용 산화막 성장기구에 관한 연구 = Kinetics of rapid thermal oxidation of siliconlink 심규찬; Shim, Kew-Chan; et al, 한국과학기술원, 1996 |
1594 | 급열처리가 AISI H13 열간성형용 공구강의 기계적 성질에 미치는 효과 = The effect of rapid heat treatment on mechanical properties of AISI H13 hot work tool steellink 소명기; So, Myoung-Gi; et al, 한국과학기술원, 1980 |
1595 | 긋기 전극 시험법에 의한 합금 600과 690의 재부동태 거동 연구 및 입계응력부식균열 민감도와의 상관관계에 관한 연구 = A study on the repassivation kinetics and its relation with IGSCC susceptibility of alloys 600 and 690link 김수정; Kim, Su-Jeong; et al, 한국과학기술원, 1999 |
1596 | 기계 연마를 이용한 다층 박막 재료의 투과전자현미경 시편 제작 연구 = A study on TEM specimen preparation of multilayer materials by mechanical polishinglink 정종석; Jeong, Jong-Seok; et al, 한국과학기술원, 2001 |
1597 | 기계구조용 합금강에서 대상조직의 형성거동에 관한 연구 = A study on the banded structure formation behavior in structural alloy steelslink 정동호; Jung, Dong-Ho; et al, 한국과학기술원, 1985 |
1598 | 기계적 합금화 방법에 의해 제조된 마그네슘계 수소저장합금의 전극수명 향상에 관한 연구 = Improvement on the cycle life of Mg-based hydrogen storage alloy prepared by ball millinglink 한상철; Han, Sang-Cheol; et al, 한국과학기술원, 1999 |
1599 | 기계적 합금화 방법으로 제조된 $Cu_5Zn_8$ -bearing Pb-free 솔더의 Cu 기판에서 젖음성 및 계면반응 = Wetting properties and interfacial reactions of $Cu_5Zn_8$ -bearing Pb-free solders on the cu substrate by MAlink 정인유; Jung, In-Yu; et al, 한국과학기술원, 2009 |
1600 | 기계적 합금화된 산화물 분산강화 니켈기 초내열함금에서의 γ'열처리에 의한 미세조직 및 기계적 성질 제어 = Control of microstructure and mechanical properties by γ'heat treatment of a mechanically alloyed ODS Ni-base superalloylink 류호진; Ryu, Ho-Jin; et al, 한국과학기술원, 1995 |
1601 | 기계적 합금화한 ODS Ni 초내열 합금의 2차 재결정 거동에 대한 연구 = A study on the secondary recrystallization behaviour of mechanically alloyed ODS Ni-base superalloylink 김상범; Kim, Sang-Beom; et al, 한국과학기술원, 1994 |
1602 | 기계적 합금화한 ODS Ni기 초내열 합금의 재결정 거동 및 기계적 성질 = Recrystallization behaviour and mechanical properties of mechanically alloyed ODS Ni-base superalloylink 김희연; Kim, Hee-Yeoun; et al, 한국과학기술원, 1993 |
1603 | 기공 특성이 다공성 세라믹스의 역학적 성질에 미치는 영향 = Effect of pore characteristics on mechanical properties of porous ceramicslink 하장훈; Ha, Jang-Hoon; et al, 한국과학기술원, 2004 |
1604 | 기공을 포함한 BaTiO3 모델계에서 입계구조에 따른 입자성장 양상 = Effect of grain boundary structure on grain growth behavior in porous BaTiO3link 신지선; Shin, Ji-Seon; et al, 한국과학기술원, 2013 |
1605 | 기상 반응을 이용한 산화아연 (Zincite)단결정 성장에 관한 연구 = Growth of zinc oxide single crystals by vapor phase reaction methodlink 유한일; Yoo, Han-Ill; et al, 한국과학기술원, 1976 |
1606 | 기상유도결정화법과 급속열처리를 이용한 다결정 Si 박막에서의 Ni 금속 오염량 감소 및 다결정 Si 박막 트랜지스터 특성에 관한 연구 = Control of Ni contamination in polycrystalline Si films by vapor-induced crystallization and rapid thermal annealing process and characterization of polycrystalline Si thin film transistorslink 김존수; Kim, John-Soo; et al, 한국과학기술원, 2013 |
1607 | 기체차단 코팅 응용을 위한 광경화 지환식 에폭시 하이브리머 조성의 최적화 = Optimization of photo-curable cycloaliphatic epoxy hybrimer for application of gas barrier coatinglink 임현균; Im, Hyeon-Gyun; et al, 한국과학기술원, 2013 |
1608 | 기판용 AlN-Al2O3 복합재료의 미세구조와 열적/전기적/기계적 특성 = Microstructure and thermal/electrical/mechanical properties of AlN-Al2O3 composite for substrate applicationlink 김민건; Kim, Min-Kun; et al, 한국과학기술원, 2011 |
1609 | 나노 흡착제가 Li/S 이차전지용 유황양극의 전기화학적 특성에 미치는 영향 = The effects of the nano-sized adsorbing material on the electrochemical properties of sulfur cathode for lithium/sulfur secondary batterylink 송민상; Song, Min-Sang; et al, 한국과학기술원, 2003 |
1610 | 나노인덴터를 활용한 RF MEMS 스위치의 신뢰성 평가 연구 = Characterization of contact reliability in RF MEMS switch using nano-indenterlink 김동석; Kim, Dong-Seok; et al, 한국과학기술원, 2010 |
1611 | 나노탬플릿과 원자층 증착법을 이용한 정렬된 TiN, $TiO_2$ 일차원 나노구조의 제조와 특성평가 = Fabrication and characterization of aligned TiN, $TiO_2$ one-dimensional nanostructures by nanotemplate and atomic layer depositionlink 김상준; Kim, Sang Joon; et al, 한국과학기술원, 2013 |
1612 | 나노템플릿을 이용한 금속 나노와이어 성장에 관한 연구 = A study on the growth of metal nanowires based on template methodlink 신호선; Shin, Ho-Sun; et al, 한국과학기술원, 2007 |
1613 | 나프토퀴논디아지드를 도입한 중합체의 합성 및 감광특성 = Synthesis and characterization of phtosensitive polymers contatining Naphethoquinonediazidelink 정민호; Jung, Min-Ho; et al, 한국과학기술원, 1994 |
1614 | 낮은온도, 1기압수소압력하에서 순철과 철합금에 용해되는 수소양에 대한 고찰 = Hydrogen solubility in iron and its alloys at low temperature and atmospheric hydrogen pressurelink 조창국; Cho, Chang-Guck; et al, 한국과학기술원, 1980 |
1615 | 내부 압력 인가 법을 통한 입자형 핵연료의 탄화규소 코팅 층에 대한 파괴 강도 평가 = Characterization of the fracture strength for SiC coating layer in TRISO fuel particles by internal pressurization testlink 김민우; Kim, Min-U; 김도경; Kim, Do-Kyung; et al, 한국과학기술원, 2008 |
1616 | 내후성강 (USS COR-TEN C Steel)에서 V 을 Ti 으로 치환할 경우 강의 기계적 성질에 미치는 영향 = The effects of substituting Ti for V on mechanical properties in a weathering type HSLA steel (USS COR-TEN C steel)link 한종만; Han, Jong-Man; et al, 한국과학기술원, 1982 |
1617 | 냉각 속도가 알루미늄 합금의 응고시 편석에 미치는 영향에 관한 실험적 및 수치해석적 연구 = Effect of cooling rate on the solidification segregation of aluminum alloyslink 최정윤; Choi, Jeong-Yun; et al, 한국과학기술원, 2001 |
1618 | 냉각속도가 W-Ni-Fe 고밀도합금의 기계적 성질에 미치는 영향 = The effect of cooling rate on mechanical properties of W-Ni-Fe heavy alloylink 문유현; Moon, You-Hyun; et al, 한국과학기술원, 1977 |
1619 | 냉각속도가 철-동계 소결체의 강도에 미치는 영향 = The effect of cooling rate on the strength of iron-copper sintered compactslink 강수석; Kang, Su-Sok; et al, 한국과학기술원, 1975 |
1620 | 냉간 가공량이 방향성 규소강판의 2차 재결정에 미치는 영향 = The role of cold work on the secondary recrystallization of silicon steellink 한장섭; Hahn, Jang-Sop; et al, 한국과학기술원, 1981 |