Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 201 to 220 of 2223

201
Al 첨가가 연강의 응력부식에 미치는 영향 = The effect of Al addition on the stress corrosion cracking of mild steellink

김신; Kim, Shin; et al, 한국과학기술원, 1980

202
Al 첨가와 결정입도가 응력부식성질에 미치는 영향 = The effects of Al addition and grain size on the stress corrosion cracking of low carbon steellink

이해무; Lee, Hae-Moo; et al, 한국과학기술원, 1981

203
Al-0.5wt.%Cu 박막의 결정립성장과 Si 첨가 효과 = Grain growth of thin films of an Al-0.5WT.%Cu alloy and the effect of Si additionlink

박권식; Park, Kwon-Shik; et al, 한국과학기술원, 1993

204
Al-14.6at%Zn 합금에서 불연속 석출의 발생및 성장속도론과 이에 대한 연속석출의 영향 = The initiation and growth kinetics of discontinuous precipitation in an Al-14.6at%Zn alloy and the effects of continuous precipitationlink

김원준; Kim, Won-Jun; et al, 한국과학기술원, 1988

205
Al-18.6at%Zn 합금계에서 불연속 석출 현상에 미치는 Ge 첨가에의한 효과 = The effects of Ge on the discontinuous precipitation in an Al-18.6at%Znlink

김정균; Kim, Joung-Kyun; 이재영; 박중근; et al, 한국과학기술원, 1990

206
Al-1wt%Si-0.5wt%Cu 합금의 대기부식에 대한 연구 = Autospheric corrosion of Al-1wt%Si-0.5wt%Cu alloylink

문성모; Moon, Sung-Mo; et al, 한국과학기술원, 1993

207
Al-3at%Mg 고용체 합금의 고온 크립변형시 변형기구 천이에 미치는 결정립도와 온도의 영향 = The effects of grain size and temperature on the transition behavior of an Al-3at%Mg alloy in power law creep regimelink

정병현; Jung, Byung-Hyun; et al, 한국과학기술원, 1991

208
Al-4%Mg 고용체 합금의 반복 응력 크립 변형 중 결정립 방위가 입계 균열에 미치는 영향 = The effect of grain orientation on grain boundary cracking during cyclic creep of Al-4%Mg solid solution alloylink

박사인; Park, Sa-In; et al, 한국과학기술원, 1990

209
Al-4.5Cu 합금의 직접가압방식 용탕 단조 응고에 대한 수치 해석 모델 연구 = The modeling of solidification in direct squeeze casting of an Al-4.5Cu alloylink

김만섭; Kim, Man-Seob; et al, 한국과학기술원, 2008

210
Al-4Cu-X (Ni, tribaloy) 소결체의 마모특성에 미치는 Ni과 tribaloy 의 영향 = The effects of Ni and tribaloy addition on the wear properties of Al-4Cu-X (Ni, tribaloy) sintered compactslink

이종탁; Lee, Chong-Tak; et al, 한국과학기술원, 1981

211
Al-6Si-3Cu-(Fe)-(Mn)합금에서 Fe계 금속간화합물의 형상변화가 피로균열전파 거동에 미치는 영향 = Effects of morphology change of Fe base intermetallics on the fatigue crack propagation behavior in Al-6Si-3Cu-(Fe)-(Mn) Alloylink

박건욱; Park, Kun-Uk; et al, 한국과학기술원, 1997

212
Al-Cu 계 공정조성 부근 합금의 일방향 응고 = Unidirectional solidification of Al-Cu off-eutecticslink

박노광; Park, No-Kwang; et al, 한국과학기술원, 1979

213
Al-doped In-Sn-Zn-O thin-film transistor with enhanced electrical properties via application of trench structure = 트렌치 구조의 적용을 통해 전기적 특성이 증진된 인듐-주석-아연 산화물 박막 트랜지스터link

Kim, Do Hyung; Park, Sang-Hee; et al, 한국과학기술원, 2021

214
Al-Li 2090 합금의 저주기 피로 특성 연구 = A study on the low cycle fatigue behavior in Al-Li 2090 alloylink

박현철; Park, Hyun-Cheol; et al, 한국과학기술원, 1991

215
Al-Li 합금의 시효특성에 미치는 Mg 첨가효과 = The effects of Mg on aging characteristics of Al-Li alloyslink

김제덕; Kim, Je-Deok; et al, 한국과학기술원, 1989

216
Al-Li-(Zr)이원합금의 시효특성에 미치는 copper첨가의 영향 = The effects of Cu addition on the aging characteristics of Al-Li binary alloyslink

이승석; Lee, Seaung-Suk; et al, 한국과학기술원, 1989

217
Al-Li-Cu-Mg 합금의 시효특성에 미치는 Mg의 효과 = The effects of Mg on aging characteristics of Al-Li-Cu-Mg alloyslink

신유균; Shin, Yu-Gyun; 이재영; 박중근; et al, 한국과학기술원, 1990

218
Al-Li-Cu-Mg-Ag-(-Zr) 합금의 석출현상에 관한 연구 = Study of the precipitation behavior in Al-Li-Cu-Mg-Ag(-Zr) alloyslink

이병찬; Lee, Byung-Chan; et al, 한국과학기술원, 1992

219
Al-Li-Cu-Mg-Ag-Zr 합금의 석출 및 기계적 성질에 미치는 Ag와 Li/Cu비의 영향 = The effects of Ag and Li/Cu ratio on the precipitation and mechanical properties of Al-Li-Cu-Mg-Ag-Zr alloyslink

박지영; Park, Ji-Yong; et al, 한국과학기술원, 1995

220
Al-Li-Cu-Mg합금의 시효특성 및 기계적 성질에 대한 Mg 의 영향 = The effects of Mg on the aging characteristics and mechanical properties of Al-Li-Cu-Mg alloyslink

전성민; Jeon, Seong-Min; 이재영; 박중근; et al, 한국과학기술원, 1990

rss_1.0 rss_2.0 atom_1.0