DC Field | Value | Language |
---|---|---|
dc.contributor.author | 양동열 | ko |
dc.contributor.author | 김한경 | ko |
dc.contributor.author | 이항수 | ko |
dc.contributor.author | 김경웅 | ko |
dc.date.accessioned | 2009-12-23T05:26:52Z | - |
dc.date.available | 2009-12-23T05:26:52Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1992-05 | - |
dc.identifier.citation | 대한기계학회논문집 A, v.16, no.5, pp.873 - 882 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/15707 | - |
dc.description.abstract | 본 연구에서는 축대칭 형상의 하이드로 미케니칼 디프드로잉 공정을 강소성 유한요소법으로 해석하는 것이다. 본 논문에서는 Fig.1에서 보이는 바와 같은 경우 에 대하여 평두 펀치(flat headed punch)를 사용한 공정을 강소성 유한요소법으로 해 석하였으며 펀치 행정에 따른 챔버내의 압력 및 플랜지부의 압력분포를 구하였다. 접촉부의 처리는 플랜지부의 압력분포를 구하였다. 접촉부의 처리는 Yang등이 제안 한 방법을 적용하였다. 이론해석의 타당성을 알아보기 위하여 금형을 설계, 제작하 고 실험을 수행하여 결과를 비교 검토하였다. | - |
dc.language | Korean | - |
dc.language.iso | ko | en |
dc.publisher | 대한기계학회 | - |
dc.title | 유한 요소법을 이용한 축대칭 하이드로 미케니칼 디프 드로잉 공정의 해석 | - |
dc.title.alternative | Analysis of the Axisymmetric Hydro-Mechanical Deep Drawing Process by Using the Finite Element Method | - |
dc.type | Article | - |
dc.subject.alternative | Rigid-Plastic Finite Element Method | en |
dc.subject.alternative | Hydro-Mechanical Deep Drawing | en |
dc.subject.alternative | Axisymmetric Deformation | en |
dc.subject.alternative | Chamber Pressure | en |
dc.subject.alternative | Fluid Flow | en |
dc.type.rims | ART | - |
dc.citation.volume | 16 | - |
dc.citation.issue | 5 | - |
dc.citation.beginningpage | 873 | - |
dc.citation.endingpage | 882 | - |
dc.citation.publicationname | 대한기계학회논문집 A | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.localauthor | 김경웅 | - |
dc.contributor.nonIdAuthor | 김한경 | - |
dc.contributor.nonIdAuthor | 이항수 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.