582 | 천음속 영역에서 유격을 고려한 날개의 공탄성 특성 = Aeroelastic characteristics of a wing with freeplay in transonic regionlink 박영근; Park, Young-Keun; et al, 한국과학기술원, 2005 |
583 | 천음속 유동장을 고려한 굴곡형 흡입관에서의 소음 방사 해석 = An analysis of sound radiation from curved intake in transonic flow fieldlink 심인보; Shim, In-Bo; et al, 한국과학기술원, 2003 |
584 | 천이영역 유동 해석을 위한 CFD-DSMC 혼합해석기법에 관한 연구 = (A) study on a hybrid CFD-DSMC method for simulations of transition regime flowslink 최영재; 권오준; et al, 한국과학기술원, 2019 |
585 | 초기 응력이 가해진 기저 구조물을 이용한 압전 유니모프의 개발 = Development of a piezoelectric unimorph with mechanically pre-stressed substratelink 강래형; Kang, Lae-Hyong; et al, 한국과학기술원, 2010 |
586 | 초소형 MHD 펌프 성능에 관한 해석 및 실험적 연구 = Analytical and experimental investigations on the performance of MHD micropumplink 김춘택; Kim, Chun-Taek; et al, 한국과학기술원, 2007 |
587 | 초소형 고체추진제 추력기의 내탄도 모델링 및 성능평가 = Internal ballistic modeling of a solid propellant micro thruster and evaluationlink 양준서; Yang, June-Seo; et al, 한국과학기술원, 2009 |
588 | 초음속 공기유동으로의 연료 분사에 관한 수치적 연구 = Numerical study on the fuel injection into a supersonic air streamlink 김경무; Kim, Kyung-Moo; et al, 한국과학기술원, 2002 |
589 | 초음속 난류 전단유동의 수치적 모사 = Numerical simulation of supersonic turbulent shear flowslink 김민환; Kim, Min-Hwan; et al, 한국과학기술원, 1998 |
590 | 초음속 충돌 제트 유동의 진동 특성에 관한 수치적 연구 = Numerical investigation of the oscillatory behavior of supersonic impinging jet flowslink 김성인; Kim, Sung-In; et al, 한국과학기술원, 2005 |
591 | 초음속 충동형 터빈의 부분 분사가 터빈 성능과 진동에 미치는 영향 = Partial admission effect on the performance and vibration of a supersonic impulse turbinelink 이항기; 권세진; et al, 한국과학기술원, 2018 |
592 | 초음속 화학반응유동의 수치적 연구 = Numerical study of supersonic chemically reacting flowslink 정동규; Chung, Dong-Kyu; et al, 한국과학기술원, 1994 |
593 | 추력 노즐 변화에 따른 수소 스크램제트 엔진 특성 = Investigation on the performance of hydrogen fuel scramjet engine with thrust nozzle variationlink 이양지; Lee, Yang-Ji; et al, 한국과학기술원, 2014 |
594 | 추력벡터제어를 위한 이차 분사유동이 있는 2DCD 노즐 내부의 입자-기체유동 상호작용의 수치적 연구 = Numerical investigation of gas-particle interaction in 2DCD nozzle having a secondary jet injection for thrust vector controllink 이진규; Lee, Jin-Gyu; et al, 한국과학기술원, 2003 |
595 | 축류압축기의 설계 최적화 = Design optimization of an axial-flow compressor stagelink 임진식; Lim, Jin-Shik; et al, 한국과학기술원, 1988 |
596 | 축약모델을 이용한 등가시스템 구성 및 동특성에 관한 연구 = Investigation on equivalent system modeling and dynamic characteristics using reduced modelslink 신영석; Shin, Young-Sug; et al, 한국과학기술원, 1999 |
597 | 충돌하는 제트로 인한 합성제트 유동장에 수치연구 = Numerical study on the outwash jet arising from two opposing jetslink 조성호; Cho, Seong-Ho; et al, 한국과학기술원, 1997 |
598 | 층간분리가 존재하는 복합재 적층판의 좌굴 및 좌굴후거동 해석 = Bucking and postbuckling behavior of composite laminates with a delaminationlink 김효진; Kim, Hyo-Jin; et al, 한국과학기술원, 1994 |
599 | 케이싱 트리트먼트를 이용한 천음속 축류 압축기 안정성 향상 = Transonic axial compressor stability enhancement with casing treatmentlink 임병준; Lim, Byeung Jun; et al, 한국과학기술원, 2014 |
600 | 큰 가로세로비 날개의 공력탄성학적 특성에 관한 연구 = A Study on aeroelastic characteristics of high-aspect-ratio wingslink 김경석; Kim, Kyung Seok; et al, 한국과학기술원, 2010 |
601 | 타원 익형 공력 및 유동장 특성에 대한 실험적 연구 = Experimental study on aerodynamic and flow field characteristics of elliptic airfoilslink 권기정; Kwon, Ki-Jung; et al, 한국과학기술원, 2006 |
602 | 탄성 변형 효과를 고려한 전진 비행하는 헬리콥터 로터 블레이드 공기역학 해석 = Aerodynamic analysis of helicopter rotor blades in forward flight considering elastic deflection effectslink 남화진; Nam, Hwa-Jin; et al, 한국과학기술원, 2008 |
603 | 탄소 열 방어 시스템의 삭마에 대한 실험 및 수치적 연구 = Experimental and numerical study on ablation of carbon-based thermal protection systemlink 이상훈; Lee, Sanghoon; et al, 한국과학기술원, 2021 |
604 | 탄소섬유강화 복합재료의 혼합모우드 층간파괴특성에 관한 연구 = Characterization of interlaminar fracture in graphite/epoxy composite under mixed-mode deformationslink 윤성호; Yoon, Sung-Ho; et al, 한국과학기술원, 1990 |
605 | 터보 냉각 사이클의 고도 모사를 위한 지상 시험 = Ground simulation of altitude test of turbo-refrigeration cyclelink 백승윤; Paek, Seung-Yun; et al, 한국과학기술원, 2017 |
606 | 파형벽면에 관한 압축성 난류 Navier-stokes 유동의 해석 = Numerical analysis of compressible turbulent navier-stokes flow over a wavy walllink 박정주; Park, Jeong-Joo; et al, 한국과학기술원, 1989 |
607 | 판파(판파)와 압전센서를 이용한 복합재 구조물의 손상평가 = Damage assessment for composite structures using plate wave and piezoelectric sensorslink 김영한; Kim, Young-Han; et al, 한국과학기술원, 2004 |
608 | 폐쇄형 풍동 시험부내의 정상 및 비정상 박리 흐름에 대한 Blockage 보정 기법 연구 = A study on the blockage correction method for steady and unsteady separated flows in a closed test section wind tunnellink 강승희; Kang, Seung-Hee; et al, 한국과학기술원, 2005 |
609 | 폴리프로필렌이 함침된 유리섬유 강화 복합재를 적용한 부품 성형 조건에 따른 물성 영향 = Effect of molding conditions on mechanical properties for parts using glass fiber reinforced composites impregnated with polypropylenelink 이종욱; 김천곤; et al, 한국과학기술원, 2022 |
610 | 풍동시험부의 벽면간섭 및 적응벽면 모형에 관한 수치적 연구 = Numerical study on wall interference and adaptive wall models for wind tunnel test sectionlink 장병희; Chang, Byeong-Hee; et al, 한국과학기술원, 1996 |
611 | 풍동시험에서 풍력터빈 블레이드의 실속 전 공력성능 보정기법 및 공력소음원 측정기법 연구 = On the correction method for the pre-stall aerodynamic performance of the scaled wind turbine model blade and the measurement method for the aero-acoustic noise source in the wind tunnellink 조태환; Cho, Tae-Hwan; et al, 한국과학기술원, 2010 |
612 | 플레어가 부착된 발사체의 저면 항력에 관한 연구 = Study of Base Drag Prediction for Flared Projectileslink 선철; Sun, Chul; et al, 한국과학기술원, 2011 |
613 | 필라멘트 와인딩된 압력 탱크의 점진적 파손 해석 및 설계 = Progressive failure analysis and design of filament wound pressure vesselslink 박재성; Park, Jae-Sung; et al, 한국과학기술원, 2002 |
614 | 항공기 생존성 향상을 위한 후방동체 온도 저감 및 IR 신호 연구 = Investigation of ir signature and temperature reduction of the rear fuselage for an aircraft survivabilitylink 이경주; Yi, Kyung-joo; et al, 한국과학기술원, 2014 |
615 | 항공기 익형 공력특성 향상을 위한 유동제어 기법에 관한 수치적 연구 = Numerical study about a flow control mechanism for the enhancement of aerodynamic characteristics of 2-D airfoilslink 최성윤; Choi, Sung-Yoon; et al, 한국과학기술원, 2008 |
616 | 항공우주시스템용 직접 NaBH4/H2O2 연료전지의 개발 및 검증 = Development and validation of direct NaBH4/H2O2 fuel cell for aerospace systemlink 오택현; Oh, Taek-Hyun; et al, 한국과학기술원, 2013 |
617 | 헬리콥터 로터의 후류 형상 및 성능 예측을 위한 순차적 시간 적분 자유 후류법 개발 = Development of a time-marching free-wake method for the prediction of helicopter rotor wake geometry and performancelink 라선욱; Na, Seon-Uk; et al, 한국과학기술원, 1998 |
618 | 헬리콥터 무힌지 로터시스템의 복합재료 적용을 통한 구조동역학 특성 향상에 대한 실험적 연구 = An experimental study on structural dynamic characteristics improvement by applying composite materials to the helicopter hingeless rotor systemlink 김덕관; Kim, Deog-Kwan; et al, 한국과학기술원, 2011 |
619 | 형상 기억 합금 작동기를 이용한 가변 형상 날개 개발 및 형상 제어 = Development of morphing wing and shape control using shape memory alloy actuatorlink 임미선; Rim, Mi-Sun; et al, 한국과학기술원, 2014 |
620 | 형상기억합금 기반 가변 강성 메쉬 절연계 개발 = Development of stiffness tunable mesh isolator based on shape memory alloylink 정호경; Jeong, Ho-Kyeong; et al, 한국과학기술원, 2014 |
621 | 형상기억합금 의탄성 효과 기반 파이로 충격 저감용 메쉬 절연계 개발 = development of pyroshock mesh isolator based on SMA pseudoelasticitylink 윤세현; Youn, Se-Hyun; et al, 한국과학기술원, 2010 |
622 | 형상기억합금 작동기를 이용한 스마트 구조의 형상 제어에 관한 연구 = A study on shape control of smart structures using shape memory alloy actuatorslink 양승만; Yang, Seung-Man; et al, 한국과학기술원, 2005 |
623 | 화약충전체의 지중폭발에 의한 지질물질 파괴예측 연구 = Prediction of geomaterial destruction caused by explosions of high explosiveslink 양주석; Yang, Ju-Suk; et al, 한국과학기술원, 2023 |
624 | 회전익-고정익 상호간섭 및 블레이드 진동의 영향이 있는 축류 압축기내에서의 비정상 천음속 유동 = Unsteady transonic axial-compressor flow under the effect of rotor-stator interaction or blade vibrationlink 강인모; Kang, In-Mo; et al, 한국과학기술원, 1991 |
625 | 효율적인 SMA 모델링 및 SMAHC의 동적/음향 특성 = Effective SMA Modeling and Dynamic/Acoustic Characteristics of SMAHClink 강명구; Kang, Myung-Koo; et al, 한국과학기술원, 2011 |
626 | 후류 효과를 고려한 헬리콥터 로터 블레이드의 공탄성 특성 = Wake effects on aeroelastic characteristics of helicopter rotor bladeslink 유승재; Yoo, Seung-Jae; et al, 한국과학기술원, 2011 |
627 | 후판 곡면 복합재 구조물의 레이저 초음파 검사를 위한 회전식 스캐닝 기법 = Rotational scanning method for laser ultrasonic inspection of thick and curved composite structurelink 이영준; 이정률; et al, 한국과학기술원, 2019 |
628 | 후향 계단에서 재부착하고 재전개하는 2차원 비압축성 흐름 해석 = Analysis for two-dimensional incompressible reattaching and redeveloping flow behind a rearward-facing steplink 김성초; Kim, Sung-Ch'o; 박승오; 장극; et al, 한국과학기술원, 1989 |
629 | 흐름방향 압력구배가 후방계단 뒤 난류 재부착흐름에 미치는 영향에 대한 실험적 연구 = An experimental investigation of the effects of streamwise pressure gradients on a turbulent reattaching flow downstream od rearward-facing steplink 라승호; Ra, Seung-Ho; 박승오; 장극; et al, 한국과학기술원, 1990 |
630 | 흡입구 연료분사 방식 스크램제트 엔진의 연료-공기 혼합 및 성능 특성에 대한 수치적 연구 = Numerical investigation of fuel-air mixing and performance characteristics in an Inlet-fueled scramjet enginelink 김재원; 권오준; et al, 한국과학기술원, 2018 |