601 | 병렬화된 비정렬 중첩 격자기법을 통한 로터-기체간 간섭현상의 수치적 연구 = Numerical simulation of rotor-airframe interaction using a parallel unstructured chimera techniquelink 유주열; You, Ju-Yeol; et al, 한국과학기술원, 2007 |
602 | 보-트러스 복합구조물의 최적 설계 = Optimal design of beam-truss bulit-up structureslink 박정선; Park, Jung-Sun; et al, 한국과학기술원, 1985 |
603 | 보강된 복합 적층 평판의 좌굴 및 좌굴후 거동해석 = Buckling and postbuckling behavior of stiffened laminated composite panelslink 김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 1994 |
604 | 보존형을 이용한 이차원 비정상 천음속 유동 계산 = 2D unsteady transonic potential flow calculations using a conservation formlink 이인원; Lee, In-Won; et al, 한국과학기술원, 1994 |
605 | 복사매개체 내에서의 화염면과 연료표면 사이의 열전달에 관한 매개변수 연구 = Parametric study on the heat transfer in a radiating medium between flame and fuel surfaceslink 이찬; Lee, Chan; et al, 한국과학기술원, 1988 |
606 | 복사열전달을 고려한 수직평판의 자연대류 경계층에 관한 연구 = Effect of thermal radiation on the free convective boundary layer of a vertical flat platelink 고현진; Ko, Hyun-Jin; et al, 한국과학기술원, 1993 |
607 | 복사효과를 고려한 기체-입자 직접접촉식 열교환기 해석 = Analysis of a gas-particle direct-contact heat exchanger with radiation effectlink 박재현; Park, Jae-Hyun; et al, 한국과학기술원, 1998 |
608 | 복사효과를 고려한 수소/공기/불활성입자 혼합물에서의 화염전파에 대한 연구 = A study on flame propagation through a mixture of Hydrogen/air and inert particles with radiation effectlink 김덕연; Kim, Deok-Yeon; et al, 한국과학기술원, 1999 |
609 | 복수 이해관계자 관점을 고려한 vehicle routing problem의 파레토 프론트 생성 = Pareto front generation for the vehicle routing problem with vector profitslink 고재열; 안재명; et al, 한국과학기술원, 2018 |
610 | 복잡한 구조에서 레이저 훈련 기반 음향방출 위치표정 및 손상 누적 가시화 = Acoustic emission localization and damage accumulation visualization in complex structures based on laser elastic wave traininglink 정병학; 이정률; et al, 한국과학기술원, 2019 |
611 | 복합재 구조에 삽입된 광섬유 센서의 개선된 ingress/egress 기법 개발 = Improved ingress/egress methods for optical fibers embedded in the composite structureslink 박상오; Park, Sang-Oh; et al, 한국과학기술원, 2005 |
612 | 복합재료 날개의 진동특성 = Vibration characteristics of composite winglink 조덕형; Cho, Deok-Hyung; et al, 한국과학기술원, 1989 |
613 | 복합재료 날개의 하중 재분포 및 조종면 리버설 특성에 대한 정적 공탄성 해석 = Static aeroelastic analysis for load redistribution and control surface reversal of composite winglink 김은석; Kim, Eun-Seok; et al, 한국과학기술원, 1990 |
614 | 복합재료 로우터 블레이드에 대한 공력탄성학적 최적설계 = Aeroelastic optimum design for composite rotor bladeslink 권혁준; Kwon, Hyuk-Jun; et al, 한국과학기술원, 2000 |
615 | 복합재료 링크의 해석 및 최적화 = Analysis and optimization of composite linkslink 김수현; Kim, Soo-Hyun; et al, 한국과학기술원, 2003 |
616 | 복합재료 면재를 갖는 샌드위치 평판의 최적화 = Optimization of a sandwich plate with composite faceslink 권일범; Kwon, Il-Bum; et al, 한국과학기술원, 1989 |
617 | 복합재료 무베어링 로우터 시스템의 정지 비행시 공탄성 해석 = Aeroelastic analysis of composite bearingless rotors in hoverlink 임인규; Lim, In-Gyu; et al, 한국과학기술원, 2004 |
618 | 복합재료 파손모드에 따른 광섬유 센서의 신호특성에 관한 연구 = Signal characteristics of a fiber optic sensor for failure modes of composite laminateslink 김대현; Kim, Dae-Hyun; et al, 한국과학기술원, 1999 |
619 | 복합재료 평판의 초음속 플러터 해석 = Flutter analysis of composite panels in supersonic flowlink 조맹효; Cho, Maeng-Hyo; et al, 한국과학기술원, 1990 |
620 | 복합재료 헬리콥터 블레이드의 동적 특성 = Dynamic characteristics of a composite helicopter rotor bladelink 차호철; Cha, Ho-Chul; et al, 한국과학기술원, 1989 |
621 | 복합재료의 전자기파 반사특성을 고려한 구조물 설계 및 해석 = Design and analysis of radar absorbing structure considering electromagnetic wave reflection properties of composite platelink 송운형; Song, Woon-Hyoung; et al, 한국과학기술원, 2000 |
622 | 복합재료의 혼합모우드 층간파괴인성치의 실험적 평가 = Evaluation of mixed mode interlaminar fracture toughness of graphite/epoxy composite materialslink 김형준; Kim, Hyong-Jun; et al, 한국과학기술원, 1989 |
623 | 복합적층판의 저속 충격거동에 대한 비선형 해석 = Nonlinear analysis of composite laminates subjected to low-velocity impactlink 최익현; Choi, Ik-Hyeon; et al, 한국과학기술원, 1989 |
624 | 부분 선형 근사 기법을 이용한 정적 무장 할당 연구 = Piecewise-linear approximation method for static weapon-target assignmentlink 신인선; Shin, In Seon; et al, 한국과학기술원, 2016 |
625 | 부스팅 노즐에 의한 초음속 캐비티 압력 변화에 관한 연구 = Effect of boosting nozzle on the pressure of supersonic cavitylink 김형준; Kim, Hyung-Jun; et al, 한국과학기술원, 2003 |
626 | 분산형 다중 레이다 융합 시스템을 위한 추적 관리 구조 선정 = Track management architecture for distributed multiple radar fusion systemlink 이우철; 최한림; et al, 한국과학기술원, 2017 |
627 | 비디오스코프 및 회선신경망 기반 엔진 고압 압축기 블레이드 손상의 현장 진단 연구 = Study on in-field diagnosis of blades in high pressure compressor of engine based on videoscope and convolutional neural networkslink 김용호; 이정률; et al, 한국과학기술원, 2018 |
628 | 비례항법을 이용한 무인 항공기의 최적 충돌 회피 기동 = Proportional navigation-based optimal collision avoidance for UAVslink 한수철; Han, Su-Cheol; et al, 한국과학기술원, 2005 |
629 | 비선형 거동을 고려한 복합적층 패널의 공력열탄성 해석 = Aerothermoelastic analysis of composite laminated panel considering nonlinear behaviorlink 오일권; Oh, Il-Kwon; et al, 한국과학기술원, 1997 |
630 | 비선형 와류격자법을 이용한 낮은 종횡비 날개의 공력특성 예측 = Estimation of low aspect ratio wing aerodynamics using nonlinear vortex lattice methodlink 이태승; Lee, Tae-Seung; et al, 한국과학기술원, 2008 |
631 | 비선형 힌지를 갖는 접는 미사일 조종날개에 대한 모델 수립 및 동적 특성 = Dynamic characteristics and model establishment of deployable missile control fin with nonlinear hingelink 김대관; Kim, Dae-Kwan; et al, 한국과학기술원, 2003 |
632 | 비압축성 점성 유동해석을 위한 비정렬 격자 유한 요소법의 연구 = Study of an unstructured finite element method for incompressible viscous flow analysislink 서정수; Suh, Jung-Soo; et al, 한국과학기술원, 1992 |
633 | 비압축성 층류 경계층 유동에 의한 대칭형 공동의 수치적 연구 = Numerical analysis of the incompressible laminar shear layer of symmetric cavitylink 권세진; Kwon, Se-Jin; et al, 한국과학기술원, 1984 |
634 | 비점성 박리 모델을 이용한 받음각을 갖는 회전체 주위에서의 유동장 계산 = Calculation of the flow about a body of revolution at incidence using inviscid separated flow modellink 이응호; Lee, Eung-Ho; et al, 한국과학기술원, 1985 |
635 | 비점성 천음속 유동해석을 위한 다중격자 유한요소법의 연구 = A multi-grid finite element method for inviscid transonic flow analysislink 박기철; Park, Ki-Cheol; et al, 한국과학기술원, 1990 |
636 | 비정렬 격자계를 이용한 와류 고리 상태 유동 해석 = Detailed flow analysis of vortex ring state using an unstructured mesh flow solverlink 이희동; Lee, Hee-Dong; et al, 한국과학기술원, 2003 |
637 | 비정렬 격자계에서 고차정확도 불연속 갤러킨 기법을 이용한 Navier-Stokes 유동 해석자 개발 = Development of a Navier-Stokes flow slover using high-order discontinuous galerkin method on unstructured mesheslink 최재훈; Choi, Jae-Hoon; et al, 한국과학기술원, 2011 |
638 | 비정렬 격자계에서 고차정확도 불연속 갤러킨 기법을 이용한 Navier-Stokes 유동 해석자 개발 = Development of a Navier-Stokes flow slover using high-order discontinuous galerkin method on unstructured mesheslink 최재훈; Choi, Jae-Hoon; et al, 한국과학기술원, 2011 |
639 | 비정렬 격자계에서의 예조건화를 이용한 비점성 비정상 유동해석 기법 = Preconditioning methods for unsteady inviscid flow on unstructured gridslink 남화진; Nam, Hwa-Jin; et al, 한국과학기술원, 2001 |
640 | 비정렬 격자기법을 이용한 내부 무장창의 유동 특성과 무장 분리 운동에 관한 수치적 연구 = Numerical simulation of flow characteristics and store separation of internal weapons bay using an unstructured mesh techniquelink 김덕현; Kim, Duk-Hyun; et al, 한국과학기술원, 2013 |
641 | 비정렬 격자를 사용한 로터-동체 상호간섭효과 해석 = Rotor-fuselage interactional aerodynamic analysis using unstructured mesheslink 이종국; Lee, Jong-Kook; et al, 한국과학기술원, 1999 |
642 | 비정렬 격자를 이용한 Euler Code의 병렬처리 기법 = Parallel processing for an Euler Code using unstructured gridlink 김성호; Kim, Sung-Ho; et al, 한국과학기술원, 1994 |
643 | 비정렬 동적 격자를 이용한 상대운동이 있는 물체 주위의 2차원 비정상 유동해석 = Two-dimensional unsteady flows around bodies with relative motion using unstructured mesheslink 백경욱; Baek, Kyoung-Wook; et al, 한국과학기술원, 1997 |
644 | 비정렬 적응 격자를 이용한 블레이드-와류 간섭에 따른 공탄성 변형 예측 = Prediction of aeroelastic deformation under close BVI using unstructured adaptive mesheslink 조규원; Jo, Kyu-Won; et al, 한국과학기술원, 2002 |
645 | 비정렬 적응격자를 이용한 압축성 유동의 최적가중함수 유한요소해석과 고해상도 기법에 관한 연구 = Adaptive upwind finite element method using exponential weighting functions with unstructured mesh and high resolution techniqueslink 성춘호; Sung, Chun-Ho; et al, 한국과학기술원, 1996 |
646 | 비정렬 중첩 격자기법을 이용한 풍력터빈 블레이드의 공력 해석에 관한 수치적 연구 = Numerical simulation of the aerodynamic analysis of wind turbine rotor blades using an unstructured overset mesh techniquelink 김다혜; Kim, Da-Hye; et al, 한국과학기술원, 2010 |
647 | 비정렬 중첩 격자기법을 이용한 헬리콥터 요소간 공력간섭에 대한 수치적 연구 = Numerical simulation of the interaction effect of helicopter components using an unstructured overset mesh techniquelink 하현석; Ha, Hyun-Seok; et al, 한국과학기술원, 2009 |
648 | 비정렬 중첩 격자기법을 통한 동축반전 로터의 간섭현상에 관한 수치적 연구 = Numerical simulation of interaction effects on a coaxial rotor using an unstructured overset mesh methodlink 이종혁; Lee, Jong-Hyuk; et al, 한국과학기술원, 2009 |
649 | 비정렬 중첩격자계를 이용한 서로 겹쳐진 물체들 간의 상대운동 해석기법에 관한 연구 = An unstructured chimera technique for overlapped bodies in relative motionlink 안상준; An, Sang-Jun; et al, 한국과학기술원, 2006 |
650 | 비정렬 혼합격자계 유동 해석을 위한 고차-고해상도 수치기법 개발 = Development of high-order and high-resolution scheme on unstructured mixed mesh flow solverlink 박상현; 권오준; et al, 한국과학기술원, 2018 |
651 | 비정렬 혼합격자계 유동 해석자를 이용한 끝단 형상에 따른 로터 공력특성에 관한 수치적 연구 = Numerical study of rotor aerodynamic performances with various tip shapes an unstructured mixed mesh flow solverlink 황제영; Hwang, Je Yeong; et al, 한국과학기술원, 2015 |
652 | 비정렬격자를 사용한 2차원 유동의 직접모사법 개발 = DSMC technique of 2-D flows on unstructured triangular mesheslink 김민규; Kim, Min-Gyu; et al, 한국과학기술원, 1998 |
653 | 비정상 압축성 램프 유동의 2차원 Navier-Stokes 계산 = Navier-Stokes computational of a two dimensional unsteady compression ramp flowlink 박정응; Park, Jung-Eung; et al, 한국과학기술원, 1999 |
654 | 비정상 유동 해석을 위한 병렬화된 비정렬 중첩 격자기법 개발 = Development of an unstructured parallel overset mesh technique for unsteady flow simulationslink 정문승; Jung, Mun-Seung; et al, 한국과학기술원, 2004 |
655 | 비평형 상태 해석을 위한 효율적인 직접 모사법 개발 = Development of an efficient DSMC technique considering nonequilibrium effectlink 김재강; Kim, Jae-Gang; et al, 한국과학기술원, 2005 |
656 | 비행체 배기플룸의 적외선 복사 해석에 대한 수치적 연구 = Numerical prediction of infrared radiation of flight vehicle exhaust plumelink 조성민; Jo, Sung Min; et al, 한국과학기술원, 2016 |
657 | 비행체 비선형 제어를 위한 비선형 상태변수 관측기 설계에 관한 연구 = Nonlinear state-observer design techniques for nonlinear flight controllink 이훈구; Lee, Hun-Gu; et al, 한국과학기술원, 1994 |
658 | 비행후 데이타 해석을 통한 항공기 공력계수의 식별 = Identification of aerodynamic coefficients based on post-flight data analysislink 류창경; Ryoo, Chang-Kyung; et al, 한국과학기술원, 1990 |
659 | 사다리꼴 단면 항력 계수 측정 = Drag measurements of cylinders having trapezoidal cross-sectionlink 고범용; Koh, Bum-Yong; et al, 한국과학기술원, 1998 |
660 | 사출 성형에 의해 제작된 다중벽 탄소 나노튜브/PMMA 복합재의 기계적 물성에 관한 연구 = A study on mechanical properties of MWNT/PMMA composites fabricated by injection molding processlink 이원준; Lee, Won-Jun; et al, 한국과학기술원, 2004 |