560 | 마이크로 고체 추진제 추력기 요소의 성능 평가 = Performance evaluation of components of micro solid propellant thrusterlink 이종광; Lee, Jong-Kwang; et al, 한국과학기술원, 2004 |
561 | 마이크로 단일 추진제 추력기를 위한 촉매 반응기의 설계 및 가공 = Design and microfabrication of catalytic reactor for a micro monopropellant thrusterlink 안성용; An, Sung-Yong; et al, 한국과학기술원, 2006 |
562 | 마이크로 스케일 촉매 연소기에서의 수소-공기 예혼합 가스의 연소 특성 = Combustion characteristics of premixed hydrogen-air in micro scale catalytic combustorslink 최원영; Choi, Won-Young; et al, 한국과학기술원, 2005 |
563 | 마이크로 연료 개질을 위한 촉매 반응기의 설계, 제작 및 성능평가 = Design, fabrication and performance evaluation of catalytic reactor for micro fuel reforminglink 김태규; Kim, Tae-Gyu; et al, 한국과학기술원, 2005 |
564 | 마이크로 유전자 알고리즘을 이용한 보강 적층된 복합재 구조물의 최적설계 = Optimal design of composite laminated stiffened structures using micro genetic algorithmlink 이무근; Yi, Moo-Keun; et al, 한국과학기술원, 2006 |
565 | 마하수 5에서 회전하는 blunt body의 유동 및 열전달에 관한 수치해석 = Numerical analysis of flow and heat transfer of a spinning blunt body at mach 5link 이명섭; Lee, Myung-Sup; et al, 한국과학기술원, 2000 |
566 | 막냉각 時 초기 혼합 영역내 난류특성의 연구 = A study of turbulence characteristics in the initial mixing region of film cooling processlink 이진균; Lee, Jin-Gyun; et al, 한국과학기술원, 1983 |
567 | 멀티 에이전트 지역 정찰을 위한 심층 강화학습 = Deep reinforcement learning for multi-agent surveillancelink 신민규; 최한림; et al, 한국과학기술원, 2021 |
568 | 메조스케일 다중 노즐 희박 예혼합 CH4/H2 화염의 연소불안정 및 NOx 배출물에 대한 실험적 연구 = Experimental investigation of combustion instabilities and NOx emissions of mesoscale multinozzle lean-premixed CH4/H2 flameslink 진욱화; 김규태; et al, 한국과학기술원, 2021 |
569 | 메타모델을 이용한 2차원 날개 형상 최적설계에 대한 연구 = A study on 2D airfoil design optimization with metamodelslink 가재도; Ka, Jae-Do; et al, 한국과학기술원, 2004 |
570 | 메타모델을 이용한 복합재 구조물의 최적 설계 = Optimum design of composite structures using metamodelslink 이재훈; Lee, Jae-Hun; et al, 한국과학기술원, 2003 |
571 | 면재하중을 받는 보강된 복합적층판의 진동해석 = Vibration analysis of stiffened composite laminate subjected to inplane forceslink 박경하; Park, Kyeong-Ha; et al, 한국과학기술원, 1991 |
572 | 모델 스크램제트 지상 시험을 위한 고속 연료 분사 시스템 개발 및 적용 = Development and application of fast-stabilized fuel injection system for model scramjet ground testinglink 정준호; Jeong, Junho; et al, 한국과학기술원, 2023 |
573 | 모델 예측 제어를 이용한 다중 에이전트의 충돌 회피 경로 계획 = Model predictive control for motion planning of multi-agents with collision avoidancelink 오윤서; 최한림; et al, 한국과학기술원, 2023 |
574 | 모델 희박 예혼합 가스터빈 연소기의 저선회 화염 동역학 = Low-swirl flame dynamics in a model lean-premixed gas turbine combustorlink 구자헌; 김규태; et al, 한국과학기술원, 2020 |
575 | 모바일 로봇 기반 다중 모드 레이저 초음파 검사 자동화 기술 연구 = Multi-mode laser ultrasonic inspection automation technology based on mobile robotlink 임민지; Im, Minji; et al, 한국과학기술원, 2023 |
576 | 모재균열에 의해 발생되는 층간분리 해석 = Analysis of delamination induced by transverse cracklink 신동익; Sin, Dong-Ick; et al, 한국과학기술원, 1993 |
577 | 목적 압력분포의 최적화를 이용한 천음속 영역에서의 날개단면 설계 = Airfoil design using target pressure optimization in transonic regionlink 오영택; Oh, Young-Taek; et al, 한국과학기술원, 1996 |
578 | 무선 초음파 장치 이용 구조 손상 탐지에서의 온도 보상 알고리즘 연구 = Study on temperature compensation algorithm in structural damage detection using wireless ultrasonic devicelink 김기석; Kim, Kiseok; et al, 한국과학기술원, 2024 |
579 | 무유도 세장형 로켓 비행체에 대한 다이버젼스 해석 = Divergence analysis of unguided slender rocket-vehicleslink 송주봉; Song, Ju-Bong; et al, 한국과학기술원, 1992 |
580 | 무인 비행체의 공중 충돌 방지를 위한 시각 기반 능동적 회피 기동 시스템 = (A) vision-based active evasive maneuver system for mid-air collision avoidance of UAVslink 박정환; 한재흥; et al, 한국과학기술원, 2022 |
581 | 무인 항공기의 충돌 회피를 위한 심층 컨볼루션 신경망을 이용한 영상 기반 비행체 검출 = Vision-based aircraft detection for collision avoidance in unmanned aircraft systems using deep convolutional neural networkslink 황선유; 심현철; et al, 한국과학기술원, 2018 |
582 | 무인기 구동을 위한 PEM 연료전지의 금속 분리판 제작 및 성능 평가 = Fabrication and performance evaluation of metallic bipolar plates of PEM fuel cell for UAV applicationlink 김기인; Kim, Ki-In; et al, 한국과학기술원, 2010 |
583 | 무인항공기 교통관리 시스템을 위한 안전분리거리 결정 = Safe separation distance determination for unmanned aerial system traffic managementlink 홍기선; 이지윤; et al, 한국과학기술원, 2019 |
584 | 문이 달린 직각 공동을 지나는 난류 흐름에 관한 실험적 연구 = Experimental investigation on turbulent flow over rectangular cavities with doorslink 오범석; Oh, Bum-Seok; et al, 한국과학기술원, 1987 |
585 | 물 에어로졸 분사를 통한 고출력 레이저 세기 감소에 관한 실험적 연구 = Experimental study in reducing the intensity of highly powered lasers by spraying water aerosolslink 김동현; Kim, Dong-Hyun; et al, 한국과학기술원, 2023 |
586 | 물류 창고의 자동화를 위한 다중 로봇 할당 및 경로계획 알고리즘: 다중 제품 픽업 및 배송 = Multi-robot allocation and path planning algorithm for automated warehouses: Multi-product pickup and deliverylink 홍민지; Hong, Minji; et al, 한국과학기술원, 2024 |
587 | 미소유동해석을 위해 내재적 경계조건을 이용한 효율적인 DSMC 기법 개발 = Effective DSMC technique with implicit boundary condition for calculation of micro-flowslink 김유진; Kim, Eu-Gene; et al, 한국과학기술원, 2002 |
588 | 민감도 기법을 이용한 제자리 비행하는 로터 형상 최적화에 관한 연구 = A study on the aerodynamic design of rotor planform in hover flight using sensitivity analysislink 백상욱; Baek, Sang-Wook; et al, 한국과학기술원, 2010 |
589 | 밀폐공간내 복사에 의한 고체연료 점화의 실험적 연구 = Experimental study of solid fuel ignition in a confined enclosurelink 김영관; Kim, Young-Kwan; et al, 한국과학기술원, 1996 |
590 | 밀폐된 연소기내에서의 비정상 분무 연소에 관한 수치적 연구 = Unsteady spray flame propagation in a closed volumelink 권기훈; Kwon, Gi-Hun; et al, 한국과학기술원, 1990 |
591 | 박리와 재부착을 포함하는 비압축성 층류 경계층특성의 역방법에 의한 계산 = Calculation of characteristics of incompressible laminar boundary layer including separation and reattachment by inverse methodlink 하태흡; Ha, Tae-Heup; et al, 한국과학기술원, 1981 |
592 | 박층 난류 Navier-stokes 식과 euler식을 이용한 boattail형 발사체의 축대칭 천음속 유동 연구 = Thin-layer turbulent navier-stokes and euler flow analysis for the axisymmetric boattailed projectiles at transonic speedslink 최성욱; Choi, Seong-Wook; et al, 한국과학기술원, 1988 |
593 | 반대 방향으로 흐르는 두 곡면 벽 제트의 상호작용 = The interaction of two opposing curved wall jetslink 류호선; Rew, Ho-Seon; et al, 한국과학기술원, 1986 |
594 | 반도체 섬유 전자파 흡수 구조의 RCS 감소 효과 = RCS reduction effect of semiconductive fiber radar absorbing structurelink 최재훈; Choi, Jae Hun; et al, 한국과학기술원, 2016 |
595 | 반사식 광탄성법을 이용한 복합적층판의 변형도 해석 = Strain analysis of laminated composites by the birefringent-coating methodlink 황태경; Hwang, Tae-Kyeong; et al, 한국과학기술원, 1988 |
596 | 반사식 광탄성법을 이용한 복합적층판의 응력강도계수 결정 = Determination of stress intensity factors for composite laminates using birefringent coating methodlink 권상룡; Kwon, Sang-Lyong; et al, 한국과학기술원, 1989 |
597 | 반잠수 쌍동선 조종 운동시의 운동 이력 효과 = Memory effects in deepwater maneuvering of SWATH (small waterplane-area twin-hull) shiplink 안창범; Ahn, Chang-Bum; et al, 한국과학기술원, 1986 |
598 | 받음각 및 조종면 변위가 있는 날개의 천음속 공탄성 해석 = Transonic aeroelastic analysis of a wing with angle-of-attack and control surface deflectionlink 유재한; Yoo, Jae-Han; et al, 한국과학기술원, 2001 |
599 | 변형률 및 음향초음파 센싱 무선 SHM 노드 연구 = Research on wireless SHM node capable of sensing strain and acousto-ultrasoundlink 박진우; 이정률; et al, 한국과학기술원, 2018 |
600 | 별 추적기 보정 매개변수와 유색 잡음 칼만 필터를 활용한 위성 자세 추정 = Colored noise Kalman filter with star tracker calibration parameter for satellite attitude estimationlink 위준성; 윤효상; et al, 한국과학기술원, 2022 |
601 | 병렬화된 비정렬 중첩 격자기법을 통한 로터-기체간 간섭현상의 수치적 연구 = Numerical simulation of rotor-airframe interaction using a parallel unstructured chimera techniquelink 유주열; You, Ju-Yeol; et al, 한국과학기술원, 2007 |
602 | 보-트러스 복합구조물의 최적 설계 = Optimal design of beam-truss bulit-up structureslink 박정선; Park, Jung-Sun; et al, 한국과학기술원, 1985 |
603 | 보강된 복합 적층 평판의 좌굴 및 좌굴후 거동해석 = Buckling and postbuckling behavior of stiffened laminated composite panelslink 김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 1994 |
604 | 보존형을 이용한 이차원 비정상 천음속 유동 계산 = 2D unsteady transonic potential flow calculations using a conservation formlink 이인원; Lee, In-Won; et al, 한국과학기술원, 1994 |
605 | 복사매개체 내에서의 화염면과 연료표면 사이의 열전달에 관한 매개변수 연구 = Parametric study on the heat transfer in a radiating medium between flame and fuel surfaceslink 이찬; Lee, Chan; et al, 한국과학기술원, 1988 |
606 | 복사열전달을 고려한 수직평판의 자연대류 경계층에 관한 연구 = Effect of thermal radiation on the free convective boundary layer of a vertical flat platelink 고현진; Ko, Hyun-Jin; et al, 한국과학기술원, 1993 |
607 | 복사효과를 고려한 기체-입자 직접접촉식 열교환기 해석 = Analysis of a gas-particle direct-contact heat exchanger with radiation effectlink 박재현; Park, Jae-Hyun; et al, 한국과학기술원, 1998 |
608 | 복사효과를 고려한 수소/공기/불활성입자 혼합물에서의 화염전파에 대한 연구 = A study on flame propagation through a mixture of Hydrogen/air and inert particles with radiation effectlink 김덕연; Kim, Deok-Yeon; et al, 한국과학기술원, 1999 |
609 | 복수 이해관계자 관점을 고려한 vehicle routing problem의 파레토 프론트 생성 = Pareto front generation for the vehicle routing problem with vector profitslink 고재열; 안재명; et al, 한국과학기술원, 2018 |
610 | 복잡한 구조에서 레이저 훈련 기반 음향방출 위치표정 및 손상 누적 가시화 = Acoustic emission localization and damage accumulation visualization in complex structures based on laser elastic wave traininglink 정병학; 이정률; et al, 한국과학기술원, 2019 |
611 | 복합재 구조에 삽입된 광섬유 센서의 개선된 ingress/egress 기법 개발 = Improved ingress/egress methods for optical fibers embedded in the composite structureslink 박상오; Park, Sang-Oh; et al, 한국과학기술원, 2005 |
612 | 복합재료 날개의 진동특성 = Vibration characteristics of composite winglink 조덕형; Cho, Deok-Hyung; et al, 한국과학기술원, 1989 |
613 | 복합재료 날개의 하중 재분포 및 조종면 리버설 특성에 대한 정적 공탄성 해석 = Static aeroelastic analysis for load redistribution and control surface reversal of composite winglink 김은석; Kim, Eun-Seok; et al, 한국과학기술원, 1990 |
614 | 복합재료 로우터 블레이드에 대한 공력탄성학적 최적설계 = Aeroelastic optimum design for composite rotor bladeslink 권혁준; Kwon, Hyuk-Jun; et al, 한국과학기술원, 2000 |
615 | 복합재료 링크의 해석 및 최적화 = Analysis and optimization of composite linkslink 김수현; Kim, Soo-Hyun; et al, 한국과학기술원, 2003 |
616 | 복합재료 면재를 갖는 샌드위치 평판의 최적화 = Optimization of a sandwich plate with composite faceslink 권일범; Kwon, Il-Bum; et al, 한국과학기술원, 1989 |
617 | 복합재료 무베어링 로우터 시스템의 정지 비행시 공탄성 해석 = Aeroelastic analysis of composite bearingless rotors in hoverlink 임인규; Lim, In-Gyu; et al, 한국과학기술원, 2004 |
618 | 복합재료 파손모드에 따른 광섬유 센서의 신호특성에 관한 연구 = Signal characteristics of a fiber optic sensor for failure modes of composite laminateslink 김대현; Kim, Dae-Hyun; et al, 한국과학기술원, 1999 |
619 | 복합재료 평판의 초음속 플러터 해석 = Flutter analysis of composite panels in supersonic flowlink 조맹효; Cho, Maeng-Hyo; et al, 한국과학기술원, 1990 |