Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Thesis(Master)

Showing results 550 to 569 of 3882

550
F.M.S. 에 적응할 수 있는 치구작업 자동화에 관한 연구 = A study on the automatic positioning and clamping operation of the systemized jig-and-fixtures for F.M.S.link

한건수; Han, Keon-Soo; et al, 한국과학기술원, 1986

551
Fabrication and characterization of suspended microchannel dispensers with an integrated heater for high resolution patterning = 고해상도 패터닝의 응용을 위한 가열 소자 통합 마이크로 채널 디스펜서의 제작과 특성 분석link

Ko, Juhee; Lee, Jungchul; et al, 한국과학기술원, 2021

552
Fabrication and experimental study of a polymer-based pulsating heat pipe with metallic packaging = 금속 패키징이 적용된 폴리머 기반 진동형 히트파이프의 제작 및 실험적 연구link

Jung, Chuljae; Kim, Sung Jin; et al, 한국과학기술원, 2019

553
Fabrication of metallic tube resonators and their applications on water boiling transition measurements = 금속 튜브 공진센서의 제작과 이를 이용한 물의 비등점 측정link

Son, SukBom; Lee, Jungchul; et al, 한국과학기술원, 2022

554
Fabrication of thermopneumatic PDMS membrane actuator for generating touch and application to braille code display device = 접촉을 유발하는 열유압 PDMS 박막 구동기 제작 및 점자 출력 장치로의 응용link

Kwon, Hyuk-Jun; 권혁준; et al, 한국과학기술원, 2009

555
Fabrication of thin and flexible supercapacitors using laser annealing process = 레이저 경화 공정을 이용한 유연 박막형 슈퍼캐패시터 제작link

Kim, Geonwoong; 김건웅; et al, 한국과학기술원, 2013

556
Fatigue behavior of semi-transparent silver-nanowire healable conductor and fabrication of healable touch panel = 은 나노 와이어 힐러블 전도체의 피로거동 분석 및 힐러블 터치 패널 제작link

Bae, Jong Soo; 배종수; et al, 한국과학기술원, 2015

557
FCA 필릿 pipe 용접에서 비선형 근사와 시각센서를 이용한 비드 형상 모니터링에 대한 연구 = A study on bead shape monitoring by using vision sensor and non linear multiple regression in fillet pipe with FCAWlink

조대원; Cho, Dae-Won; et al, 한국과학기술원, 2009

558
FCA용접용 아크센서의 개발 및 이를 이용한 로보트 용접에 관한 연구 = A study on the development of arc sensor for FCAW process and its application for robotic arc weldinglink

김수영; Kim, Soo-Young; et al, 한국과학기술원, 1992

559
FDM을 이용한 레이저 절단공정에서의 절단 메카니즘 및 열전달에 관한 연구 = A study on cutting mechanism and heat transfer in laser cutting process using FDMlink

박준홍; Park, Jun-Hong; et al, 한국과학기술원, 1993

560
Feature-based camera tracking for 3D-to-2D image registration for image-guided endoscopic retrograde cholangiopancreatography = 영상 유도를 적용한 내시경적 역행성 담췌관 조영술을 위한 영상정합 및 내시경 카메라 추종 방법link

Thinh Tien Nguyen Nguyen; Nguyen; et al, 한국과학기술원, 2013

561
Feedback linearization of ABS with time delay input using adaptive sliding mode control = 적응 슬라이딩 모드 제어를 이용한 시간지연이 있는 ABS의 궤환 선형화 기법link

Park, Kyun-Sang; 박균상; et al, 한국과학기술원, 2008

562
Feedforward 방법을 이용한 BLDC 모터의 토크리플 보상 = The compensation of torque ripple of brushless DC motor using feedforward methodlink

장호연; Jang, Ho-Youn; 권대갑; 장평훈; et al, 한국과학기술원, 1997

563
FFT 기법을 이용한 관내 음향 특성치 결정 = Determination of acoustic properties in an impedance tube by FFT techniquelink

박찬석; Park, Chan-Surk; et al, 한국과학기술원, 1989

564
Fiber suspension flow and homogenization of elastic properties under uncertainty = 불확실성 하에서의 섬유 현탁액의 유동과 탄성 성질의 균질화에 대한 연구link

Sterr, Benedikt Ferdinand; Kim, Daegyoum; et al, 한국과학기술원, 2021

565
Fiber 레이저를 이용한 폴리머의 투과 접합에 관한 연구 = A study on transmission welding of polymers using fiber laserlink

이동식; Lee, Dong-Sic; et al, 한국과학기술원, 2007

566
Filtered-x LMS 알고리즘을 응용한 덕트내 전파 소음의 능동 제어 = Active noise control in a duct using filtered -x LMS algorithmlink

우재학; Woo, Jae-Hak; et al, 한국과학기술원, 1992

567
Finite analytic method 를 이용한 수직 분포 하중을 받는 보와 탄성 평판의 해석 = Application of finite analytic method to the laterally loaded beam and thin elastic platelink

조영호; Cho, Young-Ho; et al, 한국과학기술원, 1982

568
Finite collision model for the double support phase of human walking = 인체 보행 시 양발지지단계에 대한 유한 충돌 모델link

Yeom, Jin; 염진; et al, 한국과학기술원, 2010

569
Finite element analysis for large axisymmetric deformations of plastic and viscoplastic materials with plastic spin = 소성스핀을 수반하는 소성 및 점소성 재료의 축대칭 대변형에 관한 유한요소 해석link

Kim, Young; 김용; et al, 한국과학기술원, 1991

rss_1.0 rss_2.0 atom_1.0