Browse "Dept. of Mechanical Engineering(기계공학과)" by Subject DEFORMATION
Showing results 100 to 124 of 124
| Seriate microfluidic droplet coalescence under optical forces in a channel flow Cho, Hyunjun; Jung, Jin Ho; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.56, pp.324 - 334, 2015-12 |
| Shear Stress Hardening Curves of AISI 4130 Steel at Ultra-high Strain Rates with Taylor Impact Tests Lee, Sungbo; Huh, Hoon, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, v.149, 2021-03 |
| Sheet metal forming analysis of planar anisotropic materials with a proper numerical scheme for the blank holding force Choi, Tae Hoon; Lee, Choong Ho; Huh, Hoon, METALS AND MATERIALS-KOREA, v.4, no.3, pp.408 - 419, 1998 |
| Simulation of earing behaviors in bake hardening steel exhibiting a strong off-gamma-fiber component Kim, Eun-Young; Choi, Shi-Hoon; Shin, Eun-Joo; Yoon, JeongWhan, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.49, no.25, pp.3573 - 3581, 2012-12 |
| Simulation of flow-flexible body interactions with large?deformation Uddin, Emad; Sung, Hyung Jin, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, v.70, no.9, pp.1089 - 1102, 2012-11 |
| Size-dependent constitutive model for shape memory alloys based on couple stress elastoplasticity Choi, Jae-Hoon; Zaki, Wael; Sim, Gi-Dong, APPLIED MATHEMATICAL MODELLING, v.118, pp.641 - 664, 2023-06 |
| Steady state finite element simulation of bar rolling processes based on rigid-viscoplastic approach Kim, SY; Lee, HW; Min, JH; Im, Yong-Taek, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.63, no.11, pp.1583 - 1603, 2005-07 |
| Stochastic assessment considering process variation for impact of welding shrinkage on cost of ship production Heo, Hee Young; Chung, Hyun, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, v.52, no.20, pp.6076 - 6091, 2014 |
| Strain-rate potential based elastic/plastic anisotropic model for metals displaying tension-compression asymmetry Yoon, Jong-Hun; Cazacu, Oana; Yoon, Jeong Whan, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, v.200, no.23-24, pp.1993 - 2004, 2011 |
| Structure-dependent mechanical behavior of copper thin films Lee, Yong Seok; Ha, Sangyul; Park, Jin-Hyoung; Lee, Soon-Bok, MATERIALS CHARACTERIZATION, v.128, pp.68 - 74, 2017-06 |
| Super-resolving material microstructure image via deep learning for microstructure characterization and mechanical behavior analysis Jung, Jaimyun; Na, Juwon; Park, Hyung Keun; Park, Jeong Min; Kim, Gyuwon; Lee, Seungchul; Kim, Hyoung Seop, NPJ COMPUTATIONAL MATERIALS, v.7, no.1, 2021-06 |
Synthetic capsule breakup in simple shear flow Joung, Seyoung; Song, Minho; Kim, Daegyoum, PHYSICS OF FLUIDS, v.32, no.11, 2020-11 |
| Tensile Properties of Sheet Metals at Intermediate Strain Rates with Pre-Strain Kim, Seok Bong; Huh, Hoon, STEEL RESEARCH INTERNATIONAL, v.86, no.11, pp.1298 - 1311, 2015-11 |
| The effect of a non-circular drawing sequence on delamination characteristics of pearlitic steel wire Baek, Hyun Moo; Hwang, Sun Kwang; Joo, Ho Seon; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, MATERIALS & DESIGN, v.62, pp.137 - 148, 2014-10 |
| The effect of a non-circular drawing sequence on spheroidization of medium carbon steel wires Joo, Ho Seon; Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.216, pp.348 - 356, 2015-02 |
| The effect of the misfit dislocation on the in-plane shear response of the ferrite/cementite interface Kim, Jaemin; Ghaffarian, Hadi; Ryu, Seunghwa; Kang, Keonwook, COMPUTATIONAL MATERIALS SCIENCE, v.173, 2020-02 |
| The effect of the multi-pass non-circular drawing sequence on mechanical properties and microstructure evolution of low-carbon steel Lee, Jung Wan; Baek, Hyun Moo; Hwang, Sun Kwang; Son, Il-Heon; Bae, Chul Min; Im, Yong-Taek, MATERIALS & DESIGN, v.55, pp.898 - 904, 2014-03 |
| Thermal characteristics of tubular single lap adhesive joints under axial loads Kim, JK; Lee, Dai Gil, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.15, no.12, pp.1511 - 1528, 2001 |
| Three-dimensional crystal plasticity finite element analysis of microstructure and texture evolution during channel die compression of IF steel Kim, Dong-Kyu; Kim, Jaemin; Park, Wonwoong; Lee, Ho Won; Im, Yong-Taek; Lee, Yong-Shin, COMPUTATIONAL MATERIALS SCIENCE, v.100, pp.52 - 60, 2015-04 |
| Three-dimensional finite element analysis of non-isothermal shape rolling Kim, SY; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.127, no.1, pp.57 - 63, 2002-09 |
| Tungsten alloy impact fracture for frangible armor piercing Noh, Donghwan; Fazily, Piemaan; Yu, Kwanghyun; Lee, Sungbo; Ko, Dong Kyun; Sung, Min Je; Huh, Hoon; et al, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, v.180, 2023-10 |
| Two-way shape memory effect induced by repetitive compressive loading cycles Kim, Hyun-Chul; Yoo, Young-Ik; Lee, Jungju, SMART MATERIALS & STRUCTURES, v.18, no.9, 2009-09 |
| Warpage Analysis of Electroplated Cu Films on Fiber-Reinforced Polymer Packaging Substrates Kim, Cheolgyu; Lee, Tae-Ik; Kim, Min Sung; Kim, Taek-Soo, POLYMERS, v.7, no.6, pp.985 - 1004, 2015-06 |
| Warpage Behavior and Life Prediction of a Chip-on-Flex Package Under a Thermal Cycling Condition Jang, Jae-Won; Suk, Kyoung-Lim; Park, Jin-Hyoung; Paik, Kyung-Wook; Lee, Soon-Bok, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.4, no.7, pp.1144 - 1151, 2014-07 |
| Yield and strain rate potentials for aluminum alloy sheet forming design Chung, Kwansoo; Barlat, Frédéric; Yoon, Jeong Whan; Richmond, Owen; Brem, John C; Lege, Daniel J, METALS AND MATERIALS INTERNATIONAL, v.4, no.4, pp.931 - 938, 1998 |
Discover
Open Access
Date issued
- 4,058 2020 - 2024
- 12,348 2010 - 2019
- 10,785 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989