Browse "Dept. of Mechanical Engineering(기계공학과)" by Subject MODELS

Showing results 1 to 55 of 55

1
A scaling law for form drag coefficients in incompressible turbulent flows

Lee, Yeon Seung; Han, Soon-Hung; Park, Kwang Chun, OCEAN ENGINEERING, v.92, pp.75 - 82, 2014-12

2
A Study on Estimation of Joint Force Through Isometric Index Finger Abduction With the Help of SEMG Peaks for Biomedical Applications

Na, Youngjin; Choi, Changmok; Lee, Hae Dong; Kim, Jung, IEEE TRANSACTIONS ON CYBERNETICS, v.46, no.1, pp.2 - 8, 2016-01

3
A wavelet-based freeway incident detection algorithm with adapting threshold parameters

Jeong, Young-Seon; Castro-Neto, Manoel; Chung, Myung Kyoon; Han, Lee D., TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES, v.19, no.1, pp.1 - 19, 2011-02

4
Adaptive nonlocal quasicontinuum for deformations of curved crystalline structures

Park, Jong Youn; Im, Seyoung, PHYSICAL REVIEW B, v.77, no.18, 2008-05

5
An analysis for a molten carbonate fuel cell of complex geometry using three-dimensional transport equations with electrochemical reactions

Kim, Hyungsop; Bae, Joongmyeon; Choi, Do Hyung, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.38, no.11, pp.4782 - 4791, 2013-04

6
Analogy of Strain Energy Density Based Bone-Remodeling Algorithm and Structural Topology Optimization

Jang, In Gwun; Kim, Il Yong; Kwak, Byung Man, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, v.131, no.1, 2009-01

7
Analysis of bubbly lubrication in journal bearings

Choi, S; Kim, Kyung-Woong, JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, v.45, no.3, pp.802 - 808, 2002-09

8
Analysis of the responses of termites to tunnel irregularity

Ku, SJ; Jeon, Wonju; Su, NY; Lee, SH, INSECTES SOCIAUX, v.59, no.4, pp.549 - 555, 2012-11

9
Analysis of turbulent flow in channels roughened by two-dimensional ribs and three-dimensional blocks. Part I: Resistance

Ryu, D. N.; Choi, Do Hyung; Patel, V. C., INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.28, no.5, pp.1098 - 1111, 2007-10

10
Anisotropic Response of Surface Currents to the Wind in a Coastal Region

Kim, Sung Yong; Cornuelle, Bruce D.; Terrill, Eric J., JOURNAL OF PHYSICAL OCEANOGRAPHY, v.39, no.6, pp.1512 - 1533, 2009-06

11
Asymmetric flapping of a multi-segmented elastic structure

Song, Minho; Yoo, Janggon; Kim, Daegyoum, PHYSICS OF FLUIDS, v.35, no.12, 2023-12

12
Automated bone landmarks prediction on the femur using anatomical deformation technique

Baek, Seung-Yeob; Wang, Joon-Ho; Song, Insub; Lee, Kunwoo; Lee, Jehee; Koo, Seungbum, COMPUTER-AIDED DESIGN, v.45, no.2, pp.505 - 510, 2013-02

13
Biomimetic and Biophilic Design of Multifunctional Symbiotic Lichen-Schwarz Metamaterial

Saatchi, Daniel; Oh, Saewoong; Oh, Il-Kwon, ADVANCED FUNCTIONAL MATERIALS, v.33, no.31, 2023-08

14
Bound solution for residual stress due to thermal mismatch in particle reinforced composites

s. j. park; Earmme, Youn-Young, JOURNAL OF COMPOSITE MATERIALS, v.33, no.13, pp.1205 - 1221, 1999

15
Characterization of hardening behaviors of 4130 Steel, OFHC Copper, Ti6Al4V alloy considering ultra-high strain rates and high temperatures

Piao, Mingjun; Huh, Hoon; Lee, Ikjin; Park, Leeju, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.131, pp.1117 - 1129, 2017-10

16
Correspondence measure: a review for the digital twin standardization

Khan, Tarique Hasan; Noh, Chiho; Han, Soonhung, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.128, no.5-6, pp.1907 - 1927, 2023-09

17
Deadlock-free scheduling of photolithography equipment in semiconductor fabrication

Yoon, HJ; Lee, Doo Yong, IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, v.17, no.1, pp.42 - 54, 2004-02

18
Decomposing observations of high-frequency radar-derived surface currents by their forcing mechanisms: Locally wind-driven surface currents

Kim, Sung Yong; Cornuelle, Bruce D.; Terrill, Eric J., JOURNAL OF GEOPHYSICAL RESEARCH-OCEANS, v.115, 2010-12

19
Deep learning framework for material design space exploration using active transfer learning and data augmentation

Kim, Yongtae; Kim, Youngsoo; Yang, Charles; Park, Kundo; Gu, Grace X.; Ryu, Seunghwa, NPJ COMPUTATIONAL MATERIALS, v.7, no.1, 2021-09

20
Design and optimisation of one-port RF MEMS resonators and related integrated circuits using ANN-based macromodelling approach

Lee, Y.; Park, Yong-Hwa; Niu, Feng; Filipovic, Dejan, IEE PROCEEDINGS: CIRCUITS, DEVICES AND SYSTEMS, v.153, no.5, pp.480 - 488, 2006-10

21
Development of a High-SNR Stochastic sEMG Processor in a Multiple Muscle Elbow Joint

Chang, Handdeut; Kyeong, Seulki; Na, Youngjin; Kim, Yeongjin; Kim, Jung, IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING, v.31, pp.2654 - 2664, 2023

22
Development of a Novel Spherical Actuator With Two Degrees of Freedom

Kim, Hyo-Young; Kim, Hyun-Chang; Gweon, Dae-Gab; Jeong, Jaehwa, IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.20, no.2, pp.532 - 540, 2015-04

23
Effects of electrohydrodynamic flow and turbulent diffusion on collection efficiency of an electrostatic precipitator with cavity walls

Park, SJ; Kim, Sang Soo, AEROSOL SCIENCE AND TECHNOLOGY, v.37, no.7, pp.574 - 586, 2003-07

24
Effects of nearfield waves and phase information on the vibration analysis of curved beams

Jeong, Cheol-Ho; Ih, Jeong-Guon, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.23, no.8, pp.2193 - 2205, 2009-08

25
Electrohydrodynamic flow and particle transport mechanism in electrostatic precipitators with cavity walls

Park, SJ; Kim, Sang Soo, AEROSOL SCIENCE AND TECHNOLOGY, v.33, no.3, pp.205 - 221, 2000-09

26
Enhancing Injection Molding Optimization for SFRPs Through Multi-Fidelity Data-Driven Approaches Incorporating Prior Information in Limited Data Environments

Lee, Hugon; Lee, Min Gyu; Jung, Jiyoung; Lee, Ikjin; Ryu, Seunghwa, ADVANCED THEORY AND SIMULATIONS, v.7, no.8, 2024-05

27
EVALUATION OF DUCTILE FRACTURE CRITERIA IN A GENERAL THREE-DIMENSIONAL STRESS STATE CONSIDERING THE STRESS TRIAXIALITY AND THE LODE PARAMETER

Lou, Yanshan; Huh, Hoon, ACTA MECHANICA SOLIDA SINICA, v.26, no.6, pp.642 - 658, 2013-12

28
Evaluation of effective material properties of composite materials using special FEM

Yang, CH; Huh, Hoon; Hahn, TH, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.140Special, no.SI, pp.185 - 190, 2003-09

29
Exploring the Effect of Porous Structure on Thermal Conductivity in Templated Mesoporous Silica Films

Yan, Yan; King, Sophia C.; Li, Man; Galy, Tiphaine; Marszewski, Michal; Kang, Joon Sang; Pilon, Laurent; et al, JOURNAL OF PHYSICAL CHEMISTRY C, v.123, no.35, pp.21721 - 21730, 2019-09

30
Fracture loci of DP980 steel sheet for auto-body at intermediate strain rates

Lim, Sung-Jun; Huh, Hoon, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.18, no.4, pp.719 - 727, 2017-08

31
Genetic Algorithm for Job Scheduling with Maintenance Consideration in Semiconductor Manufacturing Process

Lee, Seungchul; Ni, Jun, MATHEMATICAL PROBLEMS IN ENGINEERING, v.2012, 2012

32
GPU-based real-time soft tissue deformation with cutting and haptic feedback

Courtecuisse, Hadrien; Jung, Hoe-Ryong; Allard, Jeremie; Duriez, Christian; Lee, Doo-Yong; Cotin, Stephane, PROGRESS IN BIOPHYSICS MOLECULAR BIOLOGY, v.103, no.2-3, pp.159 - 168, 2010-12

33
Investigation of thermal contact conductance of bare copper-copper and aluminum 1070-aluminum 1070 interfaces at low temperatures between 10 and 70 K

Han, Junho; Kwon, Dohoon; Kim, Bokeum; Bae, Junhyuk; Jeong, Sangkwon, CRYOGENICS, v.133, 2023-07

34
Lattice Boltzmann study of three-dimensional gas microchannel flows

Jeong, N; Lin, CL; Choi, Do Hyung, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, v.16, pp.1749 - 1759, 2006-09

35
Machine learning-based inverse design methods considering data characteristics and design space size in materials design and manufacturing: a review

Lee, Junhyeong; Park, Donggeun; Lee, Mingyu; Lee, Hugon; Park, Kundo; Lee, Ikjin; Ryu, Seunghwa, MATERIALS HORIZONS, v.10, no.12, pp.5436 - 5456, 2023-12

36
Markov-Based Maintenance Planning Considering Repair Time and Periodic Inspection

Lee, Seungchul; Li, Lin; Ni, Jun, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v.135, no.3, 2013-06

37
MIMO output estimation with reduced multirate sampling for real-time haptic rendering

Lee, K; Lee, Doo Yong, IEEE TRANSACTIONS ON ROBOTICS, v.23, no.3, pp.481 - 493, 2007-06

38
Mixed finite elements based on superconvergent patch recovery for strain gradient theory

Choi, Jae Hoon; Lee, Byung-Chai; Sim, Gi-Dong, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, v.411, 2023-06

39
Modified iterative aggregation procedure for maintenance optimisation of multi-component systems with failure interaction

Zhang, Zhuoqi; Wu, Su; Lee, Seungchul; Ni, Jun, INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE, v.45, no.12, pp.2480 - 2489, 2014

40
New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals

Lou, Yanshan; Huh, Hoon; Lim, Sung-Jun; Pack, Keun-Hwan, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, v.49, no.25, pp.3605 - 3615, 2012-12

41
Optimal maintenance policy for multi-component systems under Markovian environment changes

Zhang, Zhuoqi; Wu, Su; Li, Binfeng; Lee, Seungchul, EXPERT SYSTEMS WITH APPLICATIONS, v.40, no.18, pp.7391 - 7399, 2013-12

42
Parametric exchange of round shapes between a mechanical CAD system and a ship CAD system

Li, Jinggao; Kim, Byung-Chul; Han, Soon-Hung, COMPUTER-AIDED DESIGN, v.44, no.2, pp.154 - 161, 2012-02

43
Permeability of microscale fibrous porous media using the lattice Boltzmann method

Cho, Hyunjun; Jeong, Namgyun; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.44, pp.435 - 443, 2013-12

44
Prediction of failure in bending of an aluminium sheet alloy

Pradeaua, A; Thuillier, S; Yoon, Jeong Whan, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.119, pp.23 - 35, 2016-12

45
Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms

Pholdee, Nantiwat; Baek, Hyun Moo; Bureerat, Sujin; Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.29, no.8, pp.3427 - 3436, 2015-08

46
Rapid prototyping and reverse engineering application for orthopedic surgery planning

Ahn, DG; Lee, JY; Yang, Dong-Yol, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.20, pp.19 - 28, 2006-01

47
Real-time pinch force estimation by surface electromyography using an artificial neural network

Choi, C; Kwon, S; Park, W; Lee, HD; Kim, Jung, MEDICAL ENGINEERING & PHYSICS, v.32, no.5, pp.429 - 436, 2010-06

48
Real-Time Resolution of Self-Intersection in Dynamic Cylindrical Free-Form Deformation

Ahn, Woojin; Lee, Doo Yong, IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS, v.17, no.4, pp.515 - 526, 2011-04

49
Resonant ocean current responses driven by coastal winds near the critical latitude

Kim, Sung Yong; Crawford, Greg, GEOPHYSICAL RESEARCH LETTERS, v.41, no.15, pp.5581 - 5587, 2014-08

50
Sampling-based RBDO using the stochastic sensitivity analysis and Dynamic Kriging method

Lee, Ikjin; Choi, K. K.; Zhao, Liang, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.44, no.3, pp.299 - 317, 2011-09

51
Three-dimensional reconfiguration of an elastic sheet with unidirectional side flaps

Song, Minho; Yoo, Janggon; Ham, Junkyu; Kim, Daegyoum, JOURNAL OF FLUID MECHANICS, v.953, 2022-12

52
Tomographic PIV measurements of flow patterns in a nasal cavity with geometry acquisition

Im, Sunghyuk; Heo, Go Eun; Jeon, Young Jin; Sung, Hyung Jin; Kim, Sung Kyun, EXPERIMENTS IN FLUIDS, v.55, no.1, 2014-01

53
Uncertainty quantification of heat transfer in a microchannel heat sink with random surface roughness

Sterr, Benedikt; Mahravan, Ehsan; Kim, Daegyoum, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.174, pp.121307, 2021-08

54
Visualization of three-dimensional microcirculation of rodents' retina and choroid for studies of critical illness using optical coherence tomography angiography

Park, Jang Ryul; Lee, ByungKun; Lee, Min Ji; Kim, Kyuseok; Oh, Wang-Yuhl, SCIENTIFIC REPORTS, v.11, no.1, 2021-07

55
Volatile flame visualization of single pulverized fuel particles

Lee, Hoo Kyung; Choi, Sangmin, POWDER TECHNOLOGY, v.333, pp.353 - 363, 2018-06

rss_1.0 rss_2.0 atom_1.0