| 1 | 2차원 강소성 유한요소해석에서의 안정성 및 효율성 향상에 관한 연구 = Improvement of stability and efficiency in two-dimensional rigid-plastic finite element methodlink 박근; Park, Khun; et al, 한국과학기술원, 1994 |
| 2 | 3-D Dynamic Explicit Finite Element Analysis for Sheet Forming by Using a General Contact Searching Algorithm and Different Shell Elements Li, G.; Yang, Dong-Yol; Zhon, Z., NUMISHEET `96, pp.421 - 426, 1996 |
| 3 | 3-D Finite Element Simulation of Complicated Hot Forging Processes Using a New Remeshing Scheme Based on Body-fitted Mapping Technique Yang, Dong-Yol; Cho, J.R.; Lee, N.K., Proc. 4rd ICTP, pp.1255 - 1260, 1993-01-01 |
| 4 | 3D EF Analysis for Industrial Hollow Section Extrusion of Multiply-connected Sections Using Mismatching Refinement with Domain Decomposition Yang, Dong-Yol; Park, K.; Lee, Y. K.; Lee, D. H., Proc. 6th Int. Conf. Technology of Plasticity , pp.1807 - 1812, 1999 |
| 5 | 3D finite element analysis of a nuclear fuel rod with gap elements between the pellet and the cladding Kang, Chang-Hak; Lee, Sung Uk; Yang, Dong-Yol; Kim, Hyo-Chan; Yang, Yong-Sik, JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, v.53, no.2, pp.232 - 239, 2016-02 |
| 6 | 3D Hierarchical, Pyramid-Based Cancer Cell Chip for the Detection of Anticancer Drug Effects Lee, Kwon-Jai; An, Jeung Hee; Ha, Cheol-Woo; Son, Yong; Yang, Dong-Yol; Jung, Juhyoung; Lee, Kwang-Sup; et al, JOURNAL OF BIOMEDICAL NANOTECHNOLOGY, v.12, no.12, pp.2125 - 2138, 2016-12 |
| 7 | 3D micro-objects containing quantum dots and metallic nanoparticles fabricated by two-photon lithography Prabhakaran, Prem; Jang, Kyung Kook; Park, Sung-Yeoun; Jeon, Su-Min; Park, Jong-Jin; Son, Yong; Yang, Dong-Yol; et al, Laser and Tera-Hertz Science and Technology, LTST 2012, Optical Society of America (OSA), 2012-11 |
| 8 | 3D nano/micro manufacturing processes employing two-photon stereolithography for a spatially integrated device Yang, Dong-Yol; Lim, T. W.; Son, Y.; Kong, H.J.; Lee, K.S.; Park, S. H., ASPEN, pp.486 - 491, 2007-01-01 |
| 9 | 3차원 단조공정에서의 예비형상 설계에 관한 연구 = A study on the preform design in 3-D forginglink 신현기; Shin, Hyun-Ki; et al, 한국과학기술원, 2002 |
| 10 | 3차원 표면의 컬러 인쇄를 위한 공정 변수 영향 분석에 관한 연구 = Influence of process parameters on three-dimensional surface coloringlink 송민섭; Song, Min-Sup; et al, 한국과학기술원, 2005 |
| 11 | 3차원 형재의 후방 압출 해석 = Analysis of backward extrusion for three-dimensional shapeslink 한철호; Han, Chul-Ho; et al, 한국과학기술원, 1980 |
| 12 | A Coupled Thermo-Mechanical Analysis of Ring Rolling by a Three-Dementional Finite Element Method Yang, Dong-Yol, UNKNOWN, 1993-09 |
| 13 | A Dynamic Explicit/Rigid-Plastic Finite Element Formulation and its Application to Auto-Body Panel Stamping Jung, D. W.; Lee, J. H.; Yang, Dong-Yol, NUMISHEET `96, pp.403 - 413, 1996 |
| 14 | A FORMULATION FOR RIGID PLASTIC FINITE-ELEMENT METHOD CONSIDERING WORK-HARDENING EFFECT KIM, YJ; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.27, no.7-8, pp.487 - 495, 1985 |
| 15 | A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming Yoon, Jeong Whan; Yang, Dong-Yol; Chung, K; Barlat, F, INTERNATIONAL JOURNAL OF PLASTICITY, v.15, no.1, pp.35 - 67, 1999-04 |
| 16 | A general formulation for hydroforming of arbitrarily-shaped boxes and its application to hydroforming of an elliptic-circular box Noh, TS; Yang, Dong-Yol, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v.120, no.3, pp.481 - 488, 1998-08 |
| 17 | A generalized method for analysis of three-dimensional extrusion of arbitrarily-shaped sections Yang, Dong-Yol; Han, CH; Kim, MU, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.28, no.8, pp.517 - 534, 1986 |
| 18 | A Grid-Based Approach to Nonregular Mesh Generation for Automatic Remeshing with Metal Forming Analysis Yang, Dong-Yol, COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING, v.16, no.9, pp.625 - 635, 2000-07 |
| 19 | A local heating method by near-infrared rays for forming of non-quenchable advanced high-strength steels Lee, Eun Ho; Hwang, June Sun; Lee, Chang Whan; Yang, Dong-Yol; Yang, Woo-Ho, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.214, no.4, pp.784 - 793, 2014-04 |
| 20 | A manufacturing process using the infrared ray local heating method for seat cross members Lee, Eun Ho; Yang, Dong-Yol; Yoon, Jeong Whan; Yang, Woo-Ho, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.89, no.9-12, pp.3299 - 3305, 2017-04 |
| 21 | A Mesh Refinement Sheme for Sheet Metal Forming Analysis Cho, J.W.; Yang, Dong-Yol, NUMISHEET'2002, pp.307 - 312, 2002 |
| 22 | A method of measurement for determination of relative density in the axisymmetric forming of sintered porous material Moon, JH; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.33, no.3, pp.311 - 318, 1992-09 |
| 23 | A New All-Hexahedral Refinement Technique by Automatic Expansion of Thickness element layers Park, C.H.; Lee, Y.K.; Yang, Dong-Yol, Proceedings of the 7th International Conference on Technology of Plasticity , pp.835 - 840, 2002 |
| 24 | A New Automatic Mesh Generation Technique and its Application to the Finite Element Analysis of Practical Forging Process Yang, Dong-Yol; Lee,Y. K., Proc. 5th ICTP, pp.409 - 413, 1996 |
| 25 | A New Automatic Remeshing Technique for Finite Element Analysis of Metal Forming Process Lee, Y .K.; Lee, N. K; Yang, Dong-Yol, Proc. PCCE '93 , pp.441 - 446, 1993 |
| 26 | A New Automatic Remeshing Technique for Finite Element Analysis of Metal Forming Process, Yang, Dong-Yol, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1996-11 |
| 27 | A new formulation for three-dimensional extrusion and its application to extrusion of clover sections Han, CH; Yang, Dong-Yol; Kiuchi, M, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.28, no.4, pp.201 - 218, 1986 |
| 28 | A new levelling process using skew-arranged roll sets for the doubly-curved plate Lee, Chang-Whan; Yang, Dong-Yol; Ham, Hyung-Chul; Yoon, Sung-Pil, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.17, no.10, pp.1275 - 1284, 2016-10 |
| 29 | A new method of preform design in hot forging by using electric field theory Lee, SR; Lee, YK; Park, CH; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.44, no.4, pp.773 - 792, 2002-04 |
| 30 | A New Preform Design Technique by Considering the Deformation Behavior of Material in Metal Forging Processes Hong, J.T.; Lee, S.R.; Park,C.H.; Yang, Dong-Yol, ICFG 2004 , pp.0 - 0, 2004 |
| 31 | A new rapid manufacturing process for multi-face high-speed machining Shin, BS; Yang, Dong-Yol; Choi, DS; Lee, ES; Je, TJ; Whang, KH, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.22, no.1, pp.68 - 74, 2003-09 |
| 32 | A NEW REMESHING TECHNIQUE USING TETRAHEDRAL ELEMENTS BASED ON A POSTERIORI ERROR ESTIMATION AND ITS APPLICATION TO THE FINITE ELEMENT SIMULATION OF ME Yang, Dong-Yol; J. T. Hong; S. R. Lee, ICTP, v.0, no.0, pp.241 - 242, ICTP, 2005-10-01 |
| 33 | A numerical investigation into hot square die extrusion of an L-section considering the variation of die bearing length Kang, YS; Yang, Dong-Yol, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v.121, no.2, pp.225 - 231, 1999-05 |
| 34 | A RIGID PLASTIC FINITE-ELEMENT FORMULATION CONSIDERING THE EFFECT OF GEOMETRIC CHANGE AND ITS APPLICATION TO HYDROSTATIC BULGING KIM, YJ; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.27, no.7-8, pp.453 - 463, 1985 |
| 35 | A RIGID PLASTIC FINITE-ELEMENT FORMULATION FOR THE ANALYSIS OF GENERAL DEFORMATION OF PLANAR ANISOTROPIC SHEET METALS AND ITS APPLICATIONS Yang, Dong-Yol; KIM, YJ, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.28, no.12, pp.825 - 840, 1986 |
| 36 | A simple method to determine pressure curve for sheet hydro-forming and experimental verification Shim, H; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.169, no.2, pp.134 - 142, 2005-11 |
| 37 | A simplified approach for incorporating thickness stress in the analysis of sheet metal forming using shell elements Cho, JW; Yang, Dong-Yol; Chung, WJ, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.53, no.10, pp.2311 - 2327, 2002-04 |
| 38 | A stress integration algorithm for plane stress elastoplasticity and its applications to explicit finite element analysis of sheet metal forming processes Lee, SW; Yoon, JW; Yang, Dong-Yol, COMPUTERS STRUCTURES, v.66, no.2-3, pp.301 - 311, 1998-01 |
| 39 | A Stress Integration Method Based Yang, Dong-Yol, , 1998-01-01 |
| 40 | A Study of the Effects on the Dynamic Explicit Analysis of Autobody Panel Stamping Processes by using the Faster Punch Velocity and the Mass Scaling S Yang, Dong-Yol; Jung, D.W., Advanced Technology of Plasticity 1999, pp.659 - 660, 1999 |
| 41 | A study of tool design for minimization of heat-affected zone in rapid heat ablation process Kim, H. C.; Lee, S. H.; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.187, pp.51 - 55, 2007-06 |
| 42 | A study of void crushing in large forgings I: Bonding mechanism and estimation model for bonding efficiency Park, CY; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.57, no.1-2, pp.129 - 140, 1996-02 |
| 43 | A study of void crushing in large forgings II. Estimation of bonding efficiency by finite-element analysis Park, CY; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.72, no.1, pp.32 - 41, 1997-12 |
| 44 | A Study on Infrared Local Heat Treatment for AA5083 to Improve Formability and Automotive Part Forming Lee, Eun-Ho; Yang, Dong-Yol; Ko, SeJin, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, v.26, no.10, pp.5056 - 5063, 2017-10 |
| 45 | A STUDY ON THE BEHAVIOR OF A THIN STS 304 SHEET WITH A FREE BOUNDARY CONDITIONS SUBJECTED TO IMPACT LOADING Ahn, D. G.; Moon, G. J.; Jung, C. G.; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, v.22, no.31-32, pp.5572 - 5577, 2008-12 |
| 46 | A study on the influence of the sloped cutting angle on kerfwidth and part quality in the hotwire cutting of EPS foam for the VLM-s rapid prototyping process Ahn, DG; Lee, SH; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.43, no.14, pp.1447 - 1464, 2003-11 |
| 47 | A study on thermal characteristics of non-contact hot-tool for rapid feature detailing (RFD) process Kim, HC; Ahn, DG; Lee, SH; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.45, no.3, pp.345 - 353, 2005-03 |
| 48 | A Three-Dementional Rigid-Viscoplastic Finite Element Analysis of Hot Square Die Extrusion of An H-Section with flow Guide by ALE Description Yang, Dong-Yol, ENGINEERING COMPUTATIONS, 1998-10 |
| 49 | A three-dimensional finite element analysis of hot extrusion through square dies - Automatic remeshing technique with modular concept Kang, YS; Yang, Dong-Yol, ENGINEERING COMPUTATIONS, v.14, no.8, pp.926 - 926, 1997 |
| 50 | A three-dimensional rigid-plastic finite element analysis of bevel gear forging by using a remeshing technique Yoon, JH; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.32, no.4, pp.277 - 291, 1990 |
| 51 | A Three-dimensional simulation of isothermal turbine blade forging by the rigid-viscoplastic finite-element method Yang, Dong-Yol; Lee, NK; Yoon, JH, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, v.2, no.1, pp.119 - 124, 1993-02 |
| 52 | A three-dimensional steady-state finite element analysis of square die extrusion by using automatic mesh generation Lee, CM; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.40, no.1, pp.33 - 47, 2000-01 |
| 53 | A UBET approach for the analysis of profile ring rolling Lee, J.S.; Yang, Dong-Yol; Hahn, Y.H.; Kim, K.H.; Cho, N.C., Proc. 3rd ICPT, pp.317 - 321, 1990 |
| 54 | (A) rigid-plastic finite element alalysis of sheet metal forming considering contact and friction = 접촉과 마찰을 고려한 박판성형의 강소성 유한요소해석link Chung, Wan-Jin; 정완진; et al, 한국과학기술원, 1989 |
| 55 | (A) rigid-plastic finite element formulation considering the effect of geometric change and material anisotropy with application to sheet metal working = 형상변화 효과와 재료의 이방성을 고려한 강소성 유한요소법의 수식화 및 박판금속 성형에의 응용link Kim, Yong-Jin; 김용진; et al, 한국과학기술원, 1986 |
| 56 | (A) rigid-plastic finite element formulation of continuum elements and its application to sheet metal workin = 연속체요소의 강소성 유한요소 수식화 및 박판금속 성형에의 적용link Lee, Dong-Woo; 이동우; et al, 한국과학기술원, 1997 |
| 57 | (A) study on rapid manufacturing process and applications by high-speed machining with automatic filling = 고속가공과 자동 충진공정을 이용한 쾌속 제작공정 및 응용에 관한 연구link Shin, Bo-Sung; 신보성; et al, 한국과학기술원, 2002 |
| 58 | (A) study on the growth and prediction of wrinkles in sheet metal forming processes using bifurcation theory = 분기 좌굴 이론을 이용한 박판성형 공정에서의 주름의 발생 및 예측에 관한 연구link KIM, Jong-Bong; 김종봉; et al, 한국과학기술원, 2000 |
| 59 | (A) study on the new extrusion-forging processes = 새로운 압출-단조 공정에 관한 연구link Yang, Dong-Yol; 양동열; et al, 한국과학기술원, 1975 |
| 60 | (A) study on the three-dimensional upset forging of prismatic blocks = 3차원 업셋팅 단조에 관한 연구link Kim, Jong-Ho; 김종호; et al, 한국과학기술원, 1986 |
