Browse "Dept. of Mechanical Engineering(기계공학과)" by Author Im, Yong-Taek
Showing results 1 to 60 of 377
| 10(th) international conference on advances in materials and processing technologies - Preface Im, Yong-Taek; Chen, Fuh Kuo, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.21, no.10, pp.1438 - 1438, 2007-10 |
| 3-D Finite Element Analysis of Austenite Grain Size Prediction for Process Design in Round-Oval-Round Bar Rolling Kwon, H.C; Lee, Y; Kim, S.Y; Woo, J.S; Im, Yong-Taek, International Conference on Technology of Plasticity, pp.601 - 606, 2002-10 |
| 3-DIMENSIONAL FINITE-ELEMENT ANALYSIS WITH PHASE-CHANGE BY TEMPERATURE RECOVERY METHOD CHEN, YH; Im, Yong-Taek; LEE, ZH, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.31, no.1, pp.1 - 7, 1991-01 |
| 3D NUMERICAL AND EXPERIMENTAL STUDY ON FLOW CHARACTERISTICS OF MULTI-PASS ECAP WITH AA1050 Jin, Young-Gwan; Son, Il-Heon; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, v.23, no.6-7, pp.1822 - 1828, 2009-03 |
| 3D Numerical and Experimental Study on Flow Characteristics of Multi-pass ECAP with AA11050 Jin, Y.G.; Son, I.H.; Im, Yong-Taek, International Conference on Advanced Materials and Processing, pp.43, Harbin Institute of Technology, 2008-09-03 |
| 3롤 압연공정의 근사변형모델 개발 = Development of approximated deformation model for 3-roll rolling systemlink 민지현; Min, Ji-Hyun; et al, 한국과학기술원, 2003 |
| 3차원 결정소성 유한요소해석을 통한 변형 집합조직 및 이방성 예측 = Prediction of deformation texture and anisotropy based on three-dimensional crystal plasticity finite element methodlink 정경환; Jung, Kyung-Hwan; et al, 한국과학기술원, 2012 |
| 3차원 비압축성 유체 유동의 자유 표면 추적과 경계면 요소 재구성 기법에 관한 연구 = A front tracking and fringe element reconstruction method for three-dimensional incompressible flowlink 최두순; Choi, Du-Soon; et al, 한국과학기술원, 2005 |
| 3차원 유한요소해석을 이용한 기어 냉간단조 공정설계 시스템 개발에 관한 연구 = A study on development of process design system for cold forging of gears using 3-dimensional FE analysislink 송종호; Song, Jong-Ho; et al, 한국과학기술원, 2004 |
| A BOLT FORMING OF ULTRA-FINE GRAINED ALUMINUM Choi, J.S.; Nawaz, S.; Hwang, S.K.; Lee, H.C.; Im, Yong-Taek, International Conference on Advances in Materials and Processing Technologies, pp.25 -, Faculty of Engineering, International Islamic University Malaysia, 2009-10-28 |
| A Comparative Study of Finite Element Solutions of Solidification by Temperature Recovery Method Im, Yong-Taek; Chen, YH; Lee, JK; Lee, ZH, TRANSACTIONS OF THE AMERICAN FOUNDRYMEN'S SOCIETY, pp.299 - 304, 1991-04 |
| A computer-aided-design system for forming processes Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.90Special, no.SI, pp.1 - 7, 1999-05 |
| A Continous Hybrid Process for Manufacturing High-strengthen Low Carbon Steel Hwang, S.K.; Jin, Y.G.; Baek, H.M.; Kim, D.K.; Son, I.H.; Im, Yong-Taek, International Conference on Technology of Plasticity, pp.314 - 319, German Metal Forming Association (AGU), 2011-09-28 |
| A Continuous Hybrid Process for Manufacturing High-strength Low Carbon Steel Hwang, SK; Jin, YG; Baek, HM; Kim, DK; Son, IH; Im, Yong-Taek, STEEL RESEARCH INTERNATIONAL, v.Special, pp.314 - 319, 2011-09 |
| A Design Guideline of Multi-pass Equal Channel Angular Extrusion for Uniform strain Distribution Lee, J.H; Son, I.H; Im, Yong-Taek, Advances in Materials and Processing Technologies, pp.539 - 548, ICTMP, 2004-06 |
| A Journey from Berkeley to Daejeon via Columbus Im, Yong-Taek, AMPT, pp.17 - 18, Chinese Society of Mechanical Engineers, 2019-10-22 |
| A knowledge-based expert system for roll pass and profile design for shape rolling of round and square bars Kim, SH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.90Special, no.SI, pp.145 - 151, 1999-05 |
| A Microstructure Evolution Model for Numerical Prediction of Austenite Grain Size Distribution Jung, K.H.; Lee, H.C.; Kang, S.H.; Im, Yong-Taek, International Conference on Advances in Materials and Processing Technologies, pp.74 -, Saudi Aramco & King Fahd University of Petroleum & Minerals in association with the Bahrain Society of Engineers, 2008-11-02 |
| A microstructure evolution model for numerical prediction of austenite grain size distribution Jung, KH; Lee, HW; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.52, no.9, pp.1136 - 1144, 2010-09 |
| A Novel Technique of Friction and Material Property Measurement by Tip Test in Cold Forging Im, Yong-Taek; Kang, S.H.; Cheon, J.S., Advances in Materials and Processing Technologies, pp.721 - 732, ICTMP, 2004-06 |
| A novel technique of friction and material property measurement by tip test in cold forging Im, Yong-Taek; Kang, SH; Cheon, JS, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.220, no.1, pp.81 - 90, 2006-01 |
| A Study for Multi-Pass Equal Channel Angular Extrusion with Split Dies for Manufacturing Bulk Nanomaterials Jin, Y.G.; Im, Yong-Taek, International Symposium on BULK NANOSTRUCTURED MATERIALS, pp.220 -, Ufa State Aviation Technical University, 2007-08-14 |
| A Study of Prediction of Ductile Fracture in Cold Forging Kim, H.S.; Im, Yong-Taek; Geiger, M., International conference on design and production of dies and molds , pp.305 - 310, 1997-06 |
| A Study of the Influence of Press Speed, Contact Time, and Heat Transfer in Non-Isothermal Forging of Ti and Al Alloy Rings Im, Yong-Taek; Shen, G., NAMRC XVI, University of Illinois at Urbana-Champaign , pp.91 - 98, NAMRC, 1988-05 |
| A Study of the Influence of Press Speed, Contact Time, and Heat Transfer in Non-Isothermal Forging of Ti and Al Alloy Rings Im, Yong-Taek; Shen, GangShu, TRANSACTIONS- NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, v.16, pp.91 - 98, 1988-05 |
| A study on chevron crack formation and evolution in a cold extrusion Choi, JS; Lee, HC; Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.24, no.9, pp.1885 - 1890, 2010-09 |
| A Study on Chevron Crack Formation and Evolution in a Cold Extrusion Choi, J.S.; Lee, H.C.; Im, Yong-Taek, International Conference on Advanced Manufacture, pp.89 - 93, Society of Manufacturing Engineering, Taipei Chapter, 2010-02-04 |
| A System Approach for Design & Manufacturing Im, Yong-Taek; Geiger, M., International conference on industrial tools, pp.401 - 404, 1997 |
| (A) study for determination and prediction of fiber volume fractions in compression molded SMC parts = 압축성형된 SMC 제품의 보강섬유 체적분율 측정 및 예측에 관한 연구link Cheon, Jae-Seung; 천재승; et al, 한국과학기술원, 1997 |
| Adaptive characterization of recrystallization kinetics in IF steel by electron backscatter diffraction Kim, Dong-Kyu; Park, Won-Woong; Lee, Ho Won; Kang, Seong-Hoon; Im, Yong-Taek, JOURNAL OF MICROSCOPY, v.252, no.3, pp.204 - 216, 2013-12 |
| An Experimental Study on Forming Axi-Symmetric Heavy Forging Products Using Modelling Material Lee, G; Chu, E; Im, Yong-Taek; Lee, J, Asia-Pacific Symposium on Advanced Engineering Plasticity and Its Application , pp.917 - 922, 1993 |
| AN EXPERIMENTAL-STUDY OF FATIGUE-STRENGTH FOR ADHESIVELY BONDED TUBULAR SINGLE LAP JOINTS Lee, Dai Gil; KIM, KS; Im, Yong-Taek, JOURNAL OF ADHESION, v.35, no.1, pp.39 - 53, 1991-07 |
| AN EXPERIMENTAL-STUDY ON DENSIFICATION OF SINTERED IRON P/M CYLINDRICAL BILLETS IN FORWARD EXTRUSION OH, SG; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.37, no.1-4, pp.499 - 511, 1993-02 |
| An expert system for cold forging process design based on a depth-first search Kim, HS; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.95, no.1-3, pp.262 - 274, 1999-10 |
| Analysis and design of flat-die hot extrusion process 1. Three-dimensional finite element analysis Lee, Guen-An; Kwak, Dae-Young; Kim, Soo-Young; Im, Yong-Taek, International Journal of Mechanical Sciences, Vol.44, No.5, pp.915-934, 2002-05 |
| Analysis and design of flat-die hot extrusion process - 1. Three-dimensional finite element analysis Lee, GA; Kwak, DY; Kim, SY; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.44, no.5, pp.915 - 934, 2002-05 |
| Analysis and die design of flat-die hot extrusion process 2. Numerical design of bearing lengths Lee, Geun-An; Im, Yong-Taek, International Journal of Mechanical Sciences, Vol.44, No.5, pp.935-946, 2002-05 |
| Analysis and die design of flat-die hot extrusion process - 2. Numerical design of bearing lengths Lee, GA; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.44, no.5, pp.935 - 946, 2002-05 |
| ANALYSIS OF AXISYMMETRIC FORGING OF POROUS MATERIALS BY THE FINITE ELEMENT METHOD. Im, Yong-Taek; Kobayashi, Shiro, MATERIALS AND MANUFACTURING PROCESSES (Formerly Advanced Manufacturing Processes), v.1, no.3-4, pp.473 - 499, 1986-07 |
| ANALYSIS OF SOLIDIFICATION IN SAND AND PERMANENT-MOLD CASTINGS AND SHRINKAGE PREDICTION CHEN, YH; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.30, no.2, pp.175 - 189, 1990-04 |
| Analysis of Thermoelastic Deformation of a Shot Sleeve in a Cold Chamber Die Casting Machine Juang S.H.; Im, Yong-Taek, TRANSACTIONS OF NADCA INTERNATIONAL DIE CASTING CONGRESS AND EXPOSITION, pp.T89 - 062, 1989-10 |
| ANALYSIS OF VOID CLOSURE IN OPEN-DIE FORGING DUDRA, SP; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.30, no.1, pp.65 - 75, 1990-01 |
| Analytical model for prediction of deformed shape in three-roll rolling process Min, JH; Kwon, HC; Lee, Y; Woo, JS; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.140, no.SI, pp.471 - 477, 2003-09 |
| AP-HTPB 기반 고체 추진제의 기계적 특성 연구 = Material behavior characterization of AP-HTPB based solid propellantlink 김신회; 임용택; et al, 한국과학기술원, 2019 |
| Application of element deletion method for numerical analyses of cracking Lee, H.C.; Choi, J.S.; Jung, K.H.; Im, Yong-Taek, International Scientific Conference on Achievements in Mechanical and Materials Engineering, v.3, World Academy of Materials and Manufacturing Engineering, 2009-06-14 |
| Application of element deletion method for numerical analyses of cracking Jung, K.H.; Lee, H.C.; Im, Yong-Taek; Choi, J.S., JOURNAL OF ACHIEVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING, v.35, no.2, pp.154 - 161, 2009-08 |
| Application of Fuzzy Control Algorithm for Hot Rolling of Uniformly Thin Steel Strip Manufacture Jung, J.Y; Im, Yong-Taek; Hong, S.C; Lee, J.K, Pacific Forum on Intelligent Processing and Manufacturing of Materials , pp.214 - 220, 1997-07 |
| Application of parallel processing in three-dimensional bulk forming finite element analysis Cheon, JS; Kim, SY; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.152, no.1, pp.106 - 115, 2004-01 |
| BOLT MANUFACTURING OF FINE-GRAINED MATERIALS Im, Yong-Taek; Lee, Jung-Wan; Hwang, Sun Kwang; Kim, Dong Kyu; Baek, Hyun Moo; Park, Won-Woong; Joo, Ho-Seon; et al, 45th International Cold Forging Group Plenary Meeting, pp.142 - 149, International Cold Forging Group, 2012-09-11 |
| Cellular Automata Modeling of Grain Coarsening and Refinement during the Dynamic Recrystallization of Pure Copper Lee, Ho Won; Im, Yong-Taek, MATERIALS TRANSACTIONS, v.51, no.9, pp.1614 - 1620, 2010-09 |
| Cellular Automata Modeling of Primary Recrystallization During Annealing of AA1050 Kim, D.K.; Lee, H.W.; Jung, K.W.; Im, Yong-Taek, Asian Symposium on Precision Forging, pp.66 - 71, 2010-10-25 |
| Cellular Automata Simulation for Modeling of Microstructure Evolution during Dynamic Recrystallization Lee, H.W.; Im, Yong-Taek, Asia Steel 2009, The Korean Institute of Metals and Materials, 2009-05-24 |
| Cellular automata simulation of textural evolution during primary static recrystallization of IF steel Kim, D.K.; Jung, K.H.; Lee, H.W.; Im, Yong-Taek, International Conference on the Textures of Materials, pp.615 - 618, IIT Bombay, 2011-12-15 |
| Cellular automata simulation of textural evolution during primary static recrystallization of IF steel Kim, Dong Kyu; Jung, KH; Lee, HW; Im, Yong-Taek, 16th International Conference on Textures of Materials, ICOTOM 16, pp.615 - 618, Trans Tech Publications, 2011-12 |
| Challenges and Innovation of R&D of Korea Institute of Machinery and Materials (Keynote Speech) Im, Yong-Taek, Advances in Materials and Processing Technologies (AMPT 2014), The Society of Materials in cooperation, 2014-11-18 |
| Challenges and Innovation of R&BD of Korea Institute of Machinery and Materials Im, Yong-Taek, Korea-Asean S&T Innovation Forum, 한아세안 STI 혁신 포럼 사무국, 2014-12-04 |
| Characterization of Frictional Behavior in Cold Forging Jung, KH; Lee, HC; Ajiboye, JS; Im, Yong-Taek, TRIBOLOGY LETTERS, v.37, no.2, pp.353 - 359, 2010-02 |
| Compressible flow analysis of filling and post-filling in injection molding with phase-change effect Han, KH; Im, Yong-Taek, COMPOSITE STRUCTURES, v.38, no.1-4, pp.179 - 190, 1997-05 |
| Compression Molding of Sheet Molding Compound in Molds with or with or without Substructures Fan, J.D; Kim, J; Im, Yong-Taek; Lee, L.J, Materials in Manufacturing Processes, MD-8,ASME Winter Annual Meeting in Chicago, pp.101 - 106, 1988-12 |
| COMPRESSION MOLDING SIMULATION OF CHOPPED FIBER REINFORCED POLYMERIC COMPOSITES IN PLATE-RIB TYPE GEOMETRY KIM, J; SHIAU, YC; LEE, LJ; Im, Yong-Taek, POLYMER COMPOSITES, v.13, no.2, pp.97 - 107, 1992-04 |
Discover
Open Access
Date issued
- 4,087 2020 - 2024
- 12,322 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989