Browse "Dept. of Mechanical Engineering(기계공학과)" by Author Hong, Chang-Sun

Showing results 1 to 23 of 23

1
Analysis of crack in two-dimensional anisotropic bodies with various shaped boundaries = 여러 형상의 경계를 갖는 이차원 이반성체 내부의 균열 해석link

Cheong, Seong-Kyun; 정성균; et al, 한국과학기술원, 1988

2
Build-up 기법을 이용한 힘 측정 시스템의 설계 및 응용 = Design and applications of force measuring system using build-up techniquelink

강대임; Kang, Dae-Im; et al, 한국과학기술원, 1994

3
Crack tip stress intensity factors in two-orthotropic layer, adhesively bonded structure = 두 개의 직교 이방성 판을 접착한 구조물의 균열 첨단에서의 응력 확대계수link

Ro, Hee-Seung; 노희승; et al, 한국과학기술원, 1981

4
Graphite/Epoxy Angle-Ply 복합 적층판의 층간균열성장에 관한 해석 = Anlysis of delamination crack growth in graphite/epoxy angle-ply laminated compositelink

김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 1985

5
Optimal design of laminated composite plates under in-plane loads = 평면 하중을 받는 복합적층판의 최적 설계link

Lee, Ho-Seop; 이호섭; Hong, Chang-Sun; Kwak, Byung-Man; et al, 한국과학기술원, 1986

6
SCM-4 강의 반복특성 및 저수명 피로 = Cyclic properties and low-cycle fatigue on SCM4 steellink

강대윤; Kang, Dae-Yoon; et al, 한국과학기술원, 1981

7
간헐적인 층간결합이 Graphite/expoxy 복합재료의 파괴인성에 미치는 영향 = Effects of intermittent interlaminar bonding on toughening of graphite/expoxy compositelink

이상순; Lee, Sang-Soon; et al, 한국과학기술원, 1983

8
경계요소법에 의한 고유치 조건하의 막 형상 최적설계 = Shape optimal design of membrane with natural frequency constraints by a boundary element methodlink

박준; Park, Jun; 곽병만; 홍창선; et al, 한국과학기술원, 1988

9
반사식 광탄성법을 이용한 노치를 가진 인장시편의 탄-소성 해석 = Elastic-plastic analysis of tensile specimens with notches by reflective photoelastic methodlink

김용완; Kim, Yong-Wan; et al, 한국과학기술원, 1985

10
복합 원통의 탄소성 해석에 관한 연구 = A study on the elasto-plastic analysis of compound cylinderlink

정성종; Chung, Sung-Chong; et al, 한국과학기술원, 1981

11
복합적 층판의 층간분리현상 해석 = Analysis of delamination in laminated compositeslink

김광수; Kim, Kwang-Soo; et al, 한국과학기술원, 1982

12
복합적층판에서 적층순서가 파괴인성치에 미치는 영향 = Influence of staking sequence on fracture thoughness of composite laminateslink

김상영; Kim, Sang-Young; et al, 한국과학기술원, 1983

13
부분 관통 균열을 갖는 이방성 접착 구조물의 해석 = Analysis of adhesively bonded anisotropic structure with a part-through cracklink

정성균; Cheong, Seong-Kyun; et al, 한국과학기술원, 1984

14
유한 평판의 원공으로 부터 균열이 파생할 때 경계 조건이 응력 확대 계수에 미치는 영향 = Effects of boundary conditions on the stress intensity factor for a crack emanating from circular hole in finite sheetslink

이호형; Lee, Ho-Hyung; et al, 한국과학기술원, 1981

15
응력동결법을 이용한 3차원 광탄성 실험에서의 균열물체의 응력확대계수의 결정 = Three-dimensional photoelastic determination of stress intensity factors for cracked bodies by stress-freezing methodlink

최현창; Choi, Hyeon-Chang; et al, 한국과학기술원, 1984

16
직교 이방성 복합재료의 Bolted Joint 유한 요소 응력 해석 = A stress analysis of bolted joint in composite material by finite element methodlink

한영명; Han, Young-Myong; et al, 한국과학기술원, 1981

17
크랙을 가진 이방성 접착구조물의 해석 = Analysis of adhesively bonded anisotropic structure with a cracked platelink

정광영; Jeong, Kwang-Young; et al, 한국과학기술원, 1982

18
펄트루전 기법으로 제작된 복합재료의 동적 성질에 관한 연구 = Dynamic of properties of pultruded compointe materialslink

변준형; Byun, Joon-Hyung; et al, 한국과학기술원, 1982

19
펄트루전에 의해 제작된 유리섬유 복합재료의 기계적 성질에 관한 연구 = Mechanical properties of pultruded glass fiber reinforced plasticslink

이호진; Lee, Ho-Jin; et al, 한국과학기술원, 1982

20
포옴 심재와 복합적층된 면재를 가진 샌드위치보의 국소 좌굴에 관한 연구 = A study on the flexural wrinkling of the foam-filled sandwich beam with laminated faceslink

한동주; Han, Dong-Juh; 홍창선; 송지호; et al, 한국과학기술원, 1986

21
핀하중을 받는 유한 복합적층판의 광탄성 도료법에 의한 응력해석 = Stress analysis around pin-loaded hole in finite composite laminates by photoelastic coatingslink

강성종; Kang, Sung-Jong; et al, 한국과학기술원, 1983

22
필라멘트로 감아만든 복합재료 압력용기의 응력해석 = Stress analysis of filament wound composite pressure vessellink

이형일; Lee, Hyung-Yiel; et al, 한국과학기술원, 1985

23
환형 원반의 내면 모양 최적 설계 = Optimal shape design of inner boundary of annular disklink

우종식; Woo, Jong-Sik; 곽병만; 홍창선; et al, 한국과학기술원, 1982

rss_1.0 rss_2.0 atom_1.0