Browse "Dept. of Mechanical Engineering(기계공학과)" by Author Im, Yong-Taek
Showing results 271 to 330 of 377
| Selection of Cold Forging Lubricants by Tip Test Ajiboye, Joseph Sehinde; Jung, Ki-Ho; Im, Yong-Taek, STEEL RESEARCH INTERNATIONAL, v.81, no.9, pp.286 - 289, 2010-09 |
| Selection of Cold Forging Lubricants by Tip Test Ajiboye, Joseph Sehinde; Jung, Ki- Ho; Im, Yong-Taek, Metal Forming 2010, v.81, no.9, pp.286 - 289, Toyohashi University of Technology, 2010-09-20 |
| Sensitivity of friction condition in finite element investigations of equal channel angular extrusion Son, IH; Jin, YG; Im, Yong-Taek; Chon, SH; Park, Joong Keun, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.445, pp.676 - 685, 2007-02 |
| Sensitivity of frictional behavior by dimensional analysis in cold forging Ajiboye, J.S.; Jung, K.H.; Im, Yong-Taek, International Conference on Manufacturing, Machine Design and Tribology, pp.70 -, KSME & JSME, 2009-06-25 |
| Sensitivity study of frictional behavior by dimensional analysis in cold forging Ajiboye, Joseph S.; Jung, Ki-Ho; Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.24, no.1, pp.115 - 118, 2010-01 |
| Simulation of clutch-hub forging process using CAMPform Hussain, PB; Cheon, JS; Kwak, DY; Kim, SY; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.123, no.1, pp.120 - 132, 2002-04 |
| Simulation of fuzzy shape control for cold-rolled strip with randomly irregular strip shape Jung, JY; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.63, no.1-3, pp.248 - 253, 1997-01 |
| SMC 압축성형공정의 3차원 유한요소 해석 = Three dimensional finite element analysis of compression molding of sheet molding compoundlink 김수영; Kim, Soo-Young; et al, 한국과학기술원, 1995 |
| SMC 압축성형에서의 열 및 유동에 관한 연구 = An experimental study on heat transfer and flow in compression molding of SMClink 김기택; Kim, Ki-Taek; et al, 한국과학기술원, 1994 |
| Special issue - 10th International Conference on Advances in Materials and Processing Technologies - AMPT 2007 - Daejeon, Korea, 7-11 October 2007 - Preface Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.201, no.1-3, pp.1 - 1, 2008-05 |
| Steady state finite element simulation of bar rolling processes based on rigid-viscoplastic approach Kim, SY; Lee, HW; Min, JH; Im, Yong-Taek, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.63, no.11, pp.1583 - 1603, 2005-07 |
| Surface wrinkle defect of carbon steel in the hot bar rolling process Kwon, H.C.; Lee, H.W.; Kim, H.Y.; Im, Yong-Taek; Park, H.D.; Lee, D.L., Asia-Pacific Conference on Materials Processing, pp.92 -, APCMP, 2008-06-15 |
| Surface wrinkle defect of carbon steel in the hot bar rolling process Kwon, Hyuck-Cheol; Lee, Ho-Won; Kim, Hak-Young; Im, Yong-Taek; Park, Hae-Doo; Lee, Duk-Lak, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.209, no.9, pp.4476 - 4483, 2009-05 |
| Surrogate Assisted Teaching Learning Based Optimisation for Process Design of a Non-circular Drawing Sequence Pholdee, Nantiwat; Burrerat, Sujin; Baek, HyunMoo; Im, Yong-Taek, International Symposium on Knowledge Aqusition and Modeling (KAM), pp.193 - 196, IEEE, 2015-06-28 |
| Sustainability issues of research and development of forging Im, Yong-Taek; Hwang, Sun Kwang; Kim, Dong-Kyu; Baek, Hyun Moo; Park, Won-Woong; Lee, Jung-Wan; Joo, Ho-Seon; et al, Journal of Achievements in Materials and Manufacturing Engineering, v.54, no.2, pp.147 - 158, 2012-10 |
| Sustainability issues of research and development of forging Im, Yong-Taek; Hwang, Sun Kwang; Kim, Dong Kyu; Baek, Hyun Moo; Park, Won-Woong; Lee, Jung-Wan; Joo, Ho-Seon; et al, Achievementsin Materials and Manufacturing Engineering 2012, v.54, no.2, pp.147 - 158, World Academy of Materials and Manufacturing Engineering AMME, 2012-09-11 |
| Sustainability Issues of Research and Development of Forging Im, Yong-Taek, 32nd SENAFOR, LdTM, 2012-10-23 |
| Sustainable Research and Development of Forging Im, Yong-Taek, Global Congress on Manufacturing and Management, pp.38 -, King Mongkut’s University of Technology North Bangkok, 2010-11-23 |
| Technological Development and Application of Additive Manufacturing of KIMM Im, Yong-Taek, Taiwan Metal Technology International Forum, pp.3-1 - 3-16, Metal Industries Research & Development Centre, 2015-12-03 |
| Tetrahedral mesh generation based on advancing front technique and optimization scheme Choi, WY; Kwak, DY; Son, IH; Im, Yong-Taek, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.58, no.12, pp.1857 - 1872, 2003-11 |
| Tetrahedral mesh generation using advancing front technique and optimization scheme = 선단 전진 기법과 최적화 기법을 이용한 사면체 격자생성에 관한 연구link Choi, Woo-Young; 최우영; et al, 한국과학기술원, 2001 |
| The applicability of process design system for forward extrusion of spur gears Song, Jong-Ho; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.184, no.1-3, pp.411 - 419, 2007-04 |
| The bending of an aluminum structural frame with a rubber pad Kwon, HC; Im, Yong-Taek; Ji, DC; Rhee, MH, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.113, no.1-3, pp.786 - 791, 2001-06 |
| The effect of a non-circular drawing sequence on delamination characteristics of pearlitic steel wire Baek, Hyun Moo; Hwang, Sun Kwang; Joo, Ho Seon; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, MATERIALS & DESIGN, v.62, pp.137 - 148, 2014-10 |
| The effect of a non-circular drawing sequence on spheroidization of medium carbon steel wires Joo, Ho Seon; Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.216, pp.348 - 356, 2015-02 |
| The Effect of Deformation Speed on Frictional Behavior by Tip Test Jung, Ki-Ho; Im, Yong-Taek, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, v.132, no.3, pp.031801-1 - 031801-6, 2010-07 |
| The effect of grain refinement by multi-pass continuous hybrid process on mechanical properties of low-carbon steel wires Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, CM; Lee, Ho Won, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.214, no.7, pp.1398 - 1407, 2014-07 |
| The effect of heat treatment on formability of ultra-fine grained AA6061 for bolt manufacturing Choi, J.-S.; Jin, Y.-G.; Im, Yong-Taek, Key Engineering Materials, v.443, no.0, pp.164 - 169, 2010-06 |
| The effect of heat treatment on formability of ultra-fine grained AA6061 for bolt manufacturing Choi, J.-S.; Jin, Y.-G.; Im, Yong-Taek, 9th Asia-Pacific Conference on Materials Processing, APCMP2010, pp.164 - 169, Trans Tech Publications Ltd., 2010-06-07 |
| The Effect of Manufacturing Processes on Microstructures, Textures and Mechanical Properties of Low-Carbon Steel Wires Hwang, Sun Kwang; Baek, Hyun Moo; Joo, Ho Seon; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, Advances in Materials and Processing Technologies 2013, National Taiwan University of Science and Technology, 2013-09-25 |
| The effect of microstructure and texture evolution on mechanical properties of low carbon steel in a non-circular drawing sequence Hwang, Sun Kwang; Baek, Hyun Moo; Lee, Jung Wan; Son, Il-Heon; Im, Yong-Taek; Bae, Chul Min, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.214, no.2, pp.318 - 325, 2014-02 |
| The effect of microstructure and texture evolution on mechanical properties of low-carbon steel processed by the continuous hybrid process Hwang, Sun Kwang; Baek, Hyun Moo; Son, Il-Heon; Im, Yong-Taek; Bae, Chul Min, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.579, pp.118 - 125, 2013-09 |
| The Effect of Processing Parameters on Flatness of the Strip during Coiling Process by Elastic Stress Analysis Park, Won Woong; Kim, Dong Kyu; Kwon, Hyuck Cheol; Chun, Myeong Sig; Im, Yong-Taek, Advances in Materials and Processing Technologies 2013, National Taiwan University of Science and Technology, 2013-09-23 |
| The effect of shrink fitting ratios on tool life in bolt forming processes Lee, Hyun Chul; Saroosh, MA; Song, JH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.209, no.8, pp.3766 - 3775, 2009-04 |
| The effect of strain-hardening on frictional behavior in tip test Kang, SH; Lee, JH; Cheon, JS; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.46, no.6, pp.855 - 869, 2004-06 |
| The Effect of Surface Conditions on Friction by Tip Test Jung, Ki-Ho; Lee, Hyun-Chul; Ajiboye, Joseph S.; Kang, Seong-Hoon; Im, Yong-Taek, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, v.132, no.1, pp.011601-1 - 011601-7, 2010-01 |
| The effect of the multi-pass non-circular drawing sequence on mechanical properties and microstructure evolution of low-carbon steel Lee, Jung Wan; Baek, Hyun Moo; Hwang, Sun Kwang; Son, Il-Heon; Bae, Chul Min; Im, Yong-Taek, MATERIALS & DESIGN, v.55, pp.898 - 904, 2014-03 |
| The effect of wire drawing and aging on mechanical and electrical properties of Cu-Cr-Zr alloy Joo, Ho Seon; Kim, Yong Nam; Hwang, Sun Kwang; Im, Yong-Taek, Procedia Engineering, v.207, pp.1129 - 1134, 2017-11 |
| The effect of wire drawing and aging on mechanical and electrical properties of Cu-Cr-Zr alloy Joo, HS; Kim, YN; Hwang, SK; Im, Yong-Taek, International Conference on the Technology of Plasticity, ICTP 2017, pp.1129 - 1134, Elsevier BV, 2017-09 |
| Thermal and Mechanical Analysis of Solidification-Application to Continuous Casting Tszeng, T.C; Im, Yong-Taek; Kobayashi, S., Thermal Aspects in Manufacturing(edited by Attia, M.H. and Kops,L.), pp.31 - 46, 1988 |
| THERMAL-ANALYSIS OF SOLIDIFICATION BY THE TEMPERATURE RECOVERY METHOD TSZENG, TC; Im, Yong-Taek; KOBAYASHI, S, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.29, no.1, pp.107 - 120, 1989-01 |
| Thermo-Elasto-Plastic Finite Element Analysis of Quenching Process of Carbon Steel Kang, S.H; Im, Yong-Taek, The Seventh Asia Pacific Conference on Materials Processing, pp.70 -, APCMP, 2006-12-05 |
| Thermo-elasto-plastic finite element analysis of quenching process of carbon steel Kang, SH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.192-193, no.SI, pp.381 - 390, 2007-08 |
| Thermo-Rigid Viscoplastic Finite Element Approach for Flow Simulation of Compression Molding of Thermoset Composites Kim, S.Y; Cheon, J.S; Im, Yong-Taek, Pacific Forum on Intelligent Processing and Manufacturing of Materials , pp.857 - 863, 1997-07 |
| Three Dimensional Finite Element Analysis of Compression Molding of Sheet Molding Compound Kim, S.Y; Im, Yong-Taek, International Conference on Mechanics of Solids & Materials Engineering , pp.510 - 516, 1995 |
| Three-dimensional bulk metal forming simulations under a PC cluster environment Cheon, JS; Kim, SY; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.140Special, no.SI, pp.36 - 42, 2003-09 |
| Three-dimensional crystal plasticity finite element analysis of microstructure and texture evolution during channel die compression of IF steel Kim, Dong-Kyu; Kim, Jaemin; Park, Wonwoong; Lee, Ho Won; Im, Yong-Taek; Lee, Yong-Shin, COMPUTATIONAL MATERIALS SCIENCE, v.100, pp.52 - 60, 2015-04 |
| Three-dimensional finite element analysis of multi-pass equal-channel angular extrusion of aluminum AA1050 with split dies Jin, Y. G.; Son, I. H; Kang, S. H.; Im, Yong-Taek, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.503, no.1-2, pp.152 - 155, 2009-03 |
| Three-Dimensional Finite Element Analysis of Non-Isothermal Shape Rolling Kim, S.Y; Im, Yong-Taek, Advances in Materials and Processing Technologies , pp.950 - 957, 1998-08 |
| Three-dimensional finite element analysis of non-isothermal shape rolling Kim, SY; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.127, no.1, pp.57 - 63, 2002-09 |
| Three-Dimensional Finite Element Simulation of Shape Rolling of Bars Kim, SY; Im, Yong-Taek, INTERNATIONAL JOURNAL OF FORMING PROCESS, v.3, no.3-4, pp.253 - 278, 2000-01 |
| Three-Dimensional Finite Element Simulations of Forming Processes Im, Yong-Taek, 6th JAPAN-CHINA JOINT SYMPOSIUM ON PRECISION FORGING, pp.91 - 96, Forging Research Committee of JSTP & Cold Forging Committee, Forging & Stamping Institute of CMES, 1998-10 |
| Three-Dimensional Finite Element Simulations of Shape Rolling Kim, S.Y.; Im, Yong-Taek, International Conference on Technology of Plasticity, pp.971 - 976, 1999-09 |
| Three-dimensional finite-element analysis of the compression molding of sheet molding compound Kim, SY; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.67, no.1, pp.207 - 213, 1997-05 |
| Three-dimensional finite-element analysis of the compression molding of sheet molding compound Kim, Soo-Young; Im, Yong-Taek, Journal of Materials Processing Technology, Vol.67, No.1-3, pp.207-213, 1997-05 |
| Three-dimensional finite-element analysis of the compression molding of sheet molding compound Kim, Soo-Young; Im, Yong-Taek, Journal of Materials Processing Technology, Vol.67, No.1, pp.207-213, 1997-05 |
| Three-dimensional finite-element analysis of the quenching process of plain-carbon steel with phase transformation Kang, SH; Im, Yong-Taek, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.36A, no.9, pp.2315 - 2325, 2005-09 |
| Three-dimensional flow characteristics of aluminum alloy in multi-pass equal channel angular pressing Jin, Young-Gwan; Son, Il-Heon; Im, Yong-Taek, METALS AND MATERIALS INTERNATIONAL, v.16, no.3, pp.413 - 420, 2010-06 |
| Three-dimensional thermo-elastic-plastic finite element modeling of quenching process of plain-carbon steel in couple with phase transformation Kang, Seong-Hoon; Im, Yong-Taek, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.49, no.4, pp.423 - 439, 2007-04 |
| Three-dimensional thermo-viscoplastic analysis of compression molding of sheet molding compounds with fiber volume fraction prediction Kim, SY; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.63, no.1-3, pp.631 - 636, 1997-01 |
Discover
Open Access
Date issued
- 4,098 2020 - 2024
- 12,322 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989