Showing results 58 to 117 of 195
Parametric Studies on Flashing Behavior of a Honizontal Open Channel Flow -- A Numerical Approach Lee, Sang Yong; Seul, KW, ANS Proceedings, 1991 National Heat Transfer Conference, pp.14 - 21, 1991 |
Performance Prediction of Heat Exchangers for Waste Heat Recovery from Humid Flue Gases Jeong, D. W.; Lee, Sang Yong; Lee, Han Ju, Proceedings of the 4th JSME-KSME Thermal Engineering Conference, pp.673 - 678, JSME-KSME, 2000-10-01 |
Post-impingement Behavior of a Drop of Shear-thinning Liquid on a Dry wall An, Sang Mo; Lee, Sang Yong, Proceedings of the 13th Annual Conference on Liquid Atomization and Spray Systems -Asia, pp.232 - 237, 2009-10 |
Prediction of Atomization Performance of Effervescent Atomizers Kim, J. Y.; Lee, Sang Yong, Proceedings of 8th Annual Conference on Liquid Atomization and Spray Systems, pp.1371 - 1377, 2000 |
Prediction of heat transfer rate and pressure drop of a humid flue-gas flow across a tube bank for waste heat recovery Jeong D.W.; Lee, Sang Yong; Park B.K., 2001 ASME International Mechanical Engineering Congress and Exposition, v.369, no.2, pp.281 - 289, 2001-11-11 |
Prediction of the Frost Formation on a Cold Flat Plate through the Thermal Network Analysis Kim, Seok; Lee, Sang Yong, 8th International Conference on Multiphase Flow (ICMF2013), pp.994 - 994, POSTECH, 2013-05-31 |
Preliminary consideration to avoid eruptive flow boiling in microchannels Jeong, D.W.; Koh, K.U.; Lee, Sang Yong, First International Conference on Microchannels and Minichannels, v.1, pp.609 - 614, 2003-04-24 |
Preliminary Investigation on Spread-Splash Criterion of an Electrically Charged Droplet Ryu, SU; Lee, Sang Yong, 10th International Congress on Liquid Atomization and Spray Systems (ICLASS-2006), ICLASS, 2006 |
Pressure drop and heat transfer characteristics of flow boiling in small rectangular horizontal channels Lee, HJ; Lee, Sang Yong, 4th International Conference on Multiphase Flow, 2001-05-27 |
Pressure drop of two-phase dry-plug flow in round mini-channels Lee C.Y.; Lee, Sang Yong, 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008, pp.369 - 377, 2008-06-23 |
PSD 성능 시험 장치의 설계 이상용, 우주발사체기술 심포지움, pp.0 - 0, 우주발사체기술 심포지움, 2003-05 |
PWR 증기발생기의 밀도파 불안정 현상에 미치는 운전변수의 영향 배주한; 김석; 최영준; 이상용, 대한기계학회 2011년도 추계학술대회, pp.1434 - 1439, 대한기계학회, 2011-11-02 |
Results of Two-phase Natural Circulation in Hotleg U-bend Simulation Experiments M. Ishii; Lee, Sang Yong; Abou El-Seoud, 15th Water Reactor Safety information Meeting, pp.81 - 105, 1988 |
REVISIT OF SPREAD-REBOUND TRANSITION CRITERION Ryu, SU; Lee, Sang Yong, The Eighteenth International Symposium on Transport Phenomena, 2007-08 |
Revisit of spread-rebound transition criterion in droplet-wall impingement Ryu, SU; Lee, Sang Yong, The 8th International Symposium on Transport Phenomena, pp.2093 - 2098, International Symposium on Transport Phenomena, 2007 |
Role of Expansion-Tank-Line Resistance in Flow Instability in Semi-Closed Two-Phase Natural Circulation Loop - An Experimental Observation Kim, S. Y.; Lee, Sang Yong, 4th KSME-JSME Fluids Engineering Conference, pp.369 - 372, 1998-10-18 |
Separation of Overlapped Particles Using Boundary Curvature Information Kim, YD; Lee, Sang Yong; Chu, JH, ILASS-Asia 2001, pp.259 - 260, ILASS, 2001-10-11 |
Significance of Gravity on the Formation of Gas Plugs in Mini-scale Y-junctions Jo, Sung Geun; Kim, Seok; Lee, Sang Yong, 22nd International Symposium on Transport Phenomena (ISTP-22), Delft University of Technology, 2011-11-10 |
Simulation Experiments on Two-phase Natural Circulation in a Freon-113 Flow Visualization Loop Lee, Sang Yong; Mamoru Ishii, ANS Proceedings, 1988 National Heat Transfer Conference, pp.374 - 386, 1988 |
Size prediction of spray drops disintegrated from subcooled liquid sheet in condensable environment Koh K.U.; Lee, Sang Yong, 2003 ASME International Mechanical Engineering Congress, v.374, no.4, pp.39 - 48, 2003-11-15 |
SOFC 시스템의 연료 개질기용 2-유체 노즐로부터 분사되는 등유 액적의 평균 입경 측정 안상모; 이치영; 이상용, 대한기계학회 2009년도 유체공학부문 춘계학술대회 , pp.159 - 162, 대한기계학회, 2009-05 |
Spatial Distribution of Injected Liquid in Multiple-Spray System with Flow Interaction Between Liquid Sprays Lee, Sang Yong, Third Asian Congress of Fluid Mechanics, pp.565 - 568, 1986 |
Spray characteristics of liquid phase LPG injection for port fuel injection S.I. Engine Bae, Choongsik; Kim, Jeong Heon; Choi, Dongseok; Choi, Jaejoon; Lee, Sang Yong, Proc. 6th ILASS-Asia (Liquid Atomization and Spray Systems), pp.161 - 166, ILASS, 2001 |
Spread-Rebound Transition Criterion of Electrically Charged Drops Impacting on Dry Walls Ryu, SU; Lee, Sang Yong, 19th International Symposium on Transport Phenomena (ISTP-19), 2008 |
Spreading and Receding Behavior of a Shear-Thinning Liquid Droplet Impacting on Dry Solid Surfaces at Various Wettability and Velocity Conditions Lee, Sang Yong, 21st International Symposium on Transport Phenomena (ISTP-21), 2010 |
Spreading behavior of impinging water droplet on porous surfaces Kim, Woo Shik; An, Sang Mo; Lee, Sang Yong, Proceedings of 8th KSME-JSME Thermal Engineering Conference (TFEC8), 2012-03 |
Study of Flow Characteristics inside a Y-jet Twin-Fluid Atomizer Park, BS; In, WK; Lee, Sang Yong, 2nd JSME-KSME Thermal Engineering Conference, pp.199 - 204, 1992 |
Study of Flow Reversal Phenomenon in Crank-Type Vertical Tubes Lee, Sang Yong; Lee, CB; Jeong, DW; Kim, MH, 3rd International Symposium on Two-Phase Flow Modelling and Experimentation, 2004-09-22 |
Study of Gas/Liquid Merging Flow at a Y-Shaped Junction In, W. K.; Lee, Sang Yong, Proc. of the 3rd KSME-JSME Thermal Engineering Conference, pp.361 - 366, 1996-10-20 |
STUDY OF GAS/LIQUID MERGING FLOW AT A Y-SHAPED JUNCTION In, WK; Lee, Sang Yong, Proc. of the 3rd KSME-JSME Thermal Engineering Conference, pp.361 - 366, 1996-10-20 |
SURFACE WETTING EFFECT ON SPREAD-SPLASH TRANSITION CRITERION Ryu, Sung Uk; Lee, Sang Yong, 11th Annual Conference on Liquid Atomization and Spray Systems , ILASS, 2007-11 |
Themally Induced Flow Oscillation in Vertical Two-phase Natural Circulation Loop Lee, Sang Yong; M.Ishii, Third Int. Topical Meeting on Nuclear Power Plant Thermal Hydraulics and Operations, 1988 |
Thermally induced flow oscillation in vertical two-phase natural circulation loop Lee, Sang Yong; Ishii, Mamoru, The Third International Topical Meeting on Nuclear Power Plant Thermal Hydraulics and Operations, The Third International Topical Meeting on Nuclear Power Plant Thermal Hydraulics and Operations, 1988-11 |
Two-Phase Flow Behavior Inside A Header Lee, J. K.; Lee, Sang Yong, 3rd International Symposium on Two-Phase Flow Modelling and Experimentation, pp.0 - 0, 2004-09-22 |
Two-Phase Flow Behavior inside a Header connected to Multiple Parallel Channels Lee, JK; Lee, Sang Yong, 3rd International Symposium on Two-Phase Flow Modelling and Experimentation, 2004-09-22 |
Two-phase Flow Instabilities in an Open Natural Circulation Loop Lee, DW; Lee, Sang Yong, Second KSME-JSME Fluids Engineering Conference, pp.410 - 415, 1990 |
Two-phase Flow Studies in Spray Technology 이상용, AFERC Conference, pp.38 - 58, 1991 |
Two-phase Plug Flow Distribution at a Meso-scale T-junction - Effect of Plug Bubble Length Hong, J. H.; Lee, Sang Yong; Lim, J. S., 7th International Conference on Multiphase Flow (ICMF-2010), 2010-05-31 |
Vaporization of a Cold Water Drop Impinging against Hot Porous Substrates Kee, June Woo; Lee, Sang Yong, 26th International Symposium of Transport Phenomena (ISTP-26), Montan Universitaet Leoben, 2015-09-30 |
Y 형 삽입물이 수평관내 응축열전달 촉진에 미치는 영향 - 예비분석 이한주; 이상용; 구재학, 공기조화 냉동공학회 하계학술발표회, pp.45 - 50, 공기조화 냉동공학회, 1997 |
Y-jet 노즐부문의 유량 및 입경관계식의 도출 송시홍; 이상용, 대한기계학회 94년도 춘계학술대회, v.1, no.2, pp.368 - 371, 대한기계학회, 1994 |
Y-분기관에서의 기체 및 액체 플러그 생성에 관한 연구 조성근; 염수진; 이상용, 대한기계학회 2010년도 열공학부문 춘계학술대회 , pp.111 - 112, 대한기계학회, 2010 |
Y-자형 기체-액체 합류지점에서의 슬러깅 시작 인왕기; 이상용, 대한기계학회 1997년도 추계학술대회 , pp.457 - 462, 대한기계학회, 1997 |
Y-자형 합류지점에서 공기-물 플러그 생성에 관한 사전 연구 이치영; 권화길; 이상용, 대한기계학회 2008년도 열공학부문/유체공학부문 춘계학술대회 , pp.616 - 619, 대한기계학회, 2008-04-23 |
Y-자형 합류지점에서 기체 및 액체 플러그 생성에 관한 연구 이치영; 이상용, 대한기계학회 2009년도 유체공학부문 춘계학술대회, pp.163 - 166, 대한기계학회, 2009-05 |
가압경수형 증기발생기 유동 불안정 특성 박태정; 이학성; 배주한; 김석; 이상용, 대한기계학회 2011년도 추계학술대회, pp.1440 - 1443, 대한기계학회, 2011-11-02 |
개방된 2상 자연 순환회로에서의 입구과냉도의 영향 경익수; 이상용, 대한기계학회 94년도 춘계학술대회 , pp.478 - 481, 대한기계학회, 1994 |
개변압에 따른 디젤 분무 특성 변화 이장희; 이상용, 한국액체미립화학회 1998년도 학술강연회 , pp.70 - 77, 한국액체미립화학회, 1998 |
개변압에 따른 디젤 분무의 분사말기 미립화 특성 이장희; 이상용, 한국자동차공학회 1998년 추계학술대회, pp.423 - 429, 한국자동차공학회, 1998 |
고체 표면에 충돌하는 뉴턴 액적에 대한 최대 액막 직경 모델 검토 안상모; 이상용, 대한기계학회 2011년도 추계학술대회, 대한기계학회, 2011-11-03 |
기체-액체 밀도비가 열 교환기 헤더 내 2상 유동분배에 미치는 영향 - 실험적 연구 기준우; 김석; 이상용, 대한기계학회 2012년도 추계학술대회, pp.822 - 827, 대한기계학회, 2012-11-09 |
기체주입노즐의 내부유동양식의 구분 김주연; 이상용, 대한기계학회 2000년 학술대회, pp.306 - 315, 대한기계학회, 2000 |
기체주입노즐의 미립화 성능에 관한 연구 김주연; 이상용, 공기조화 냉동공학회 1999년도 하계학술발표회 , pp.793 - 799, 공기조화 냉동공학회, 1999 |
노즐에서 분사되는 분무액체막의 분사현상에 관한 고찰 이상용; 김인구, 대한기계학회 1984년 춘계학술대회 , pp.418 - 423, 대한기계학회, 1984 |
다공성 재료의 표면에 연속 충돌하는 액적의 크기 및 속도가 재료 내부 침투에 미치는 영향 김우식; 이상용, 대한기계학회 2009년도 유체공학부문 춘계학술대회 , pp.185 - 188, 대한기계학회, 2009-05 |
다량의 비응축성 기체가 포함된 증기/기체 혼합물의 막응축 물질전달계수 관계식의 검토 정동운; 이상용; 이한주, 대한기계학회 1999년 추계기계학술대회 , pp.370 - 377, 대한기계학회, 1999 |
단순 와류 분무노즐에서 분사되는 중공 원추형 액막의 분무각 고광웅; 이상용, 한국액체미립화학회 2002년도 학술강연회 , pp.94 - 100, 한국액체미립화학회, 2002 |
등유의 평균입경이 SOFC 시스템용 개질기의 성능에 미치는 영향에 관한 실험적 연구 안상모; 김우식; 이상용, 대한기계학회 2010년도 열공학 부문 춘계학술대회, 대한기계학회, 2010-05-14 |
디젤분무의 분사말기 미립화에 관한 관찰 이장희; 이상용, 대한기계학회 98년 춘계학술대회, pp.29 - 34, 대한기계학회, 1998 |
레이저 유속계의 기능을 확장한 입경 측정 장치의 개요 이상용; 김주연; 박병서, 한국액체미립화연구회 1993년 학술대회, 한국액체미립화연구회, 1993 |
Discover