Showing results 69 to 128 of 377
Deformation behavior of the surface defects of low carbon steel in wire rod rolling Son, IH; Lee, JD; Choi, S; Lee, DL; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.201, no.1-3, pp.91 - 96, 2008-05 |
Design Guideline of Multi-Pass Equal Channel Angular Extrusion for Uniform Starin Distribution Lee, J.H; Son, I.H; Im, Yong-Taek; Chon S.H; Park, J.K, Advance in Materials Processing Technologies, pp.MF14/1 - 6, 2006-07 |
Design guideline of multi-pass equal channel angular extrusion for uniform strain distribution Lee, JH; Son, IH; Im, Yong-Taek; Chon, SH; Park, Joong Keun, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.191, no.1-3, pp.39 - 43, 2007-08 |
Design of Bearing Lengths in Flat Die Hot Extrusion through Three Dimensional Finite Element Analysis Lee, G.A; Kim, S.Y; Kwak, D.Y; Im, Yong-Taek, Asia Symposium on Precision Forging, pp.17 - 20, 2000-10 |
Design of Gate System in Injection Molding of a Dashboard by CAMPmold Choi, D. S.; Han, K. H.; Kim, H. S.; Im, Yong-Taek, The Japan-Korea Plastics Processing Joint Seminar, pp.33 - 39, 2003-04 |
Determination of a Dimensionless Equation for Shear Friction Factor in Cold Forging Jung, KH; Im, Yong-Taek, JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, v.135, no.3, 2013-07 |
Determination of a major design parameter for forward extrusion of spur gears Song, JH; Im, Yong-Taek, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v.126, no.2, pp.255 - 263, 2004-05 |
Determination of forming limit of a structural aluminum tube in rubber pad bending Lee, JW; Kwon, HC; Rhee, MH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.140Special, no.SI, pp.487 - 493, 2003-09 |
Determination of friction condition by geometrical measurement of backward extruded aluminum alloy specimen Im, Yong-Taek; Cheon, JS; Kang, SH, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, v.124, no.2, pp.409 - 415, 2002-05 |
Determination of Shear Friction Factor using Backward Extrusion of Al Alloy Cheon, J.S; Kang, S.H; Im, Yong-Taek, Asia Symposium on Precision Forging, pp.105 - 108, 2000-10 |
Determination of short glass-fiber volume fractions in compression molded thermoset composites - Experimental Cheon, JS; Im, Yong-Taek, JOURNAL OF COMPOSITE MATERIALS, v.33, no.6, pp.525 - 546, 1999-03 |
Determination of short glass-fiber volume fractions in compression molded thermoset composites - Numerical Cheon, JS; Kim, SY; Im, Yong-Taek, JOURNAL OF COMPOSITE MATERIALS, v.33, no.6, pp.547 - 566, 1999-03 |
Development of a computer-aided-design system of cold forward extrusion of a spur gear Song, JH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.153, no.1-3, pp.821 - 828, 2004-11 |
Development of Automated Simulation System for Forming Kwak, D.Y; Cheon, J.S; Kim, S.Y; Lee, G.A; Im, Yong-Taek, International Symposium on Advanced Forming and Die Manufacturing Technology, pp.377 - 382, 1999-09 |
Development of Computer Integrated System Supporting Design of Process and Dies of Multiple Stage Forging Processes Yang, Dong-Yol; Im, Yong-Taek; Lee,Y.K.; Park, C.H.; Song, J.H.; Lee,Y.S.; Yoh, E.G.; et al, International Conference on Technology of Plasticity 1999, pp.149 - 154, 1999-09 |
Development of Dynamic Recrystallization Model and Its Application to Hot Metal Forming Processes Lee, Ho Won; Kang, Seong-Hoon; Lee, Young-Seon; Im, Yong-Taek, 7th ICFG Workshop in Process Simulation in Metalforming, International Cold Forging Group, 2012-09-13 |
Development of empirical equation to predict shear friction factor in cold forging = 냉간 단조에서의 전단마찰상수 예측식 개발link Jung, Ki-Ho; 정기호; et al, 한국과학기술원, 2012 |
DEVELOPMENT OF FUZZY CONTROL ALGORITHM FOR SHAPE CONTROL IN COLD-ROLLING JUNG, JY; Im, Yong-Taek; Lee, Kwang-Hyung, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.48, no.1-4, pp.187 - 195, 1995-01 |
Development of integrated and intelligent design and analysis system for forging processes Yang, D.Y.; Im, Yong-Taek; Yoo, Y.C.; Park, J.J.; Kim, J.H.; Chun, M.S.; Lee, C.H.; et al, CIRP ANNALS - MANUFACTURING TECHNOLOGY, v.49, no.1, pp.177 - 180, 2000-01 |
Development of Product Design System for Cold Forged Gears Considering Addendum Profile Shift Song, J.H; Im, Yong-Taek, International Conference on Technology of Plasticity, pp.61 - 66, 2002-10 |
Development of Smart Materials Processing Technologies Im, Yong-Taek, Advances in Materials and Processing Technologies 2013, National Taiwan University of Science and Technology, 2013-09-24 |
Development of Sustainable Materials Processing Technologies (Keynote Speech VI) Im, Yong-Taek, International Conference of Manufacturing Technology Engineers 2014 (ICMTE 2014), 한국생산제조시스템학회(KSMTE), 2014-10-01 |
Ductile Fracture of Aluminum Alloys in Cold Forging Im, Yong-Taek; Kim, H.S; Geiger, M, Internacional de Forjamento, pp.146 - 154, 1997 |
Editorial Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.22, no.1, pp.1 - 1, 2008-01 |
Effect of Closure Approximation on Fiber Orientation Distribution in Injection Molding Han, Kyeong-Hee; Im, Yong-Taek, INTERNATIONAL JOURNAL OF FORMING PROCESS, v.3, no.3-4, pp.213 - 234, 2000-01 |
Effect of continuous hybrid process on mechanical and electrical properties of rectangular pure copper wire Joo, Ho Seon; Hwang, Sun Kwang; Kim, Yong Nam; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.244, pp.51 - 61, 2017-06 |
Effect of Flash Dimensions and Billet Size in a Closed-Die Forging of an Aluminum Alloy Part Shen, G; Im, Yong-Taek; Altan, T, TRANSACTIONS OF THE NAMRC, v.17, pp.34 - 40, 1989-05 |
Effect of flash dimentions and billet size in closed-die forging of an aluminium alloy part Gangshu Shen; Im, Yong-Taek; Taylan Altan, NAMRC, pp.34, The Ohio State University, 1989-05 |
Effect of heat treatment and madrel material on precision tube drawing of Ni-Ti shape memory alloy Kim, Yong Nam; Hwang, Sun Kwang; Joo, Ho Seon; Im, Yong-Taek, Procedia Engineering, v.207, pp.1517 - 1522, 2017-11 |
Effect of heat treatment and mandrel material on precision tube drawing of Ni-Ti shape memory alloy Kim, YN; Hwang, SK; Joo, HS; Im, Yong-Taek, International Conference on the Technology of Plasticity, ICTP 2017, pp.1517 - 1522, Elsevier BV, 2017-09 |
Effect of initial microstructure on mechanical properties in warm caliber rolling of high carbon steel Oh, YS; Son, IH; Jung, KH; Kim, DK; Lee, DL; Im, Yong-Taek, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.528, no.18, pp.5833 - 5839, 2011-07 |
Effect of Initial Microstructure on Mechanical Properties of High Carbon Steel in Warm Caliber Oh, Y.S.; Jung, K.H.; Kim, D.K.; Im, Yong-Taek; Son, I.H.; Lee, D.L., Global Congress on Manufacturing and Management, pp.247 - 252, King Mongkut’s University of Technology North Bangkok, 2010-11-23 |
Effect of Molding Parameters on Compression Molded Sheet Molding Compound Parts Kim, K.T; Im, Yong-Taek, International Conference on Mechanics of Solids & Materials Engineering , pp.136 - 141, 1995 |
Effect of molding parameters on compression molded sheet molding compounds parts Kim, KT; Jeong, JH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.67, no.1-3, pp.105 - 111, 1997-05 |
Effect of processing routes in a multi-pass continuous hybrid process on mechanical properties, microstructure, and texture evolutions of low-carbon steel wires Hwang, Sun Kwang; Baek, Hyun Moo; Joo, HoSeon; Im, Yong-Taek, METALS AND MATERIALS INTERNATIONAL, v.21, no.2, pp.391 - 401, 2015-03 |
Effect of Surface Roughness on Friction in Cold Forging Jung, K.H.; Lee, H.C.; Kang, S.H.; Im, Yong-Taek, Global Congress on Manufacturing and Management 2008, pp.97 -, GCMM, 2008-11-12 |
Effect of surface roughness on friction in cold forging Jung, K.H.; Lee, H.C.; Kang, S.H.; Im, Yong-Taek, JOURNAL OF ACHIEVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING , v.31, no.2, pp.327 - 334, 2008-12 |
Effect of thermomechanical treatment on mechanical and electrical properties of Cu-Cr-Zr alloy in continuous hybrid process Joo, Ho Seon; Hwang, Sun Kwang; Im, Yong-Taek, Procedia Manufacturing, v.15, pp.1525 - 1532, 2018-08 |
Effect of thermomechanical treatment on mechanical and electrical properties of Cu-Cr-Zr alloy in continuous hybrid process Joo, HoSeon; Hwang, Sun-Kwang; Im, Yong-Taek, 17th International Conference on Metal Forming, METAL FORMING 2018, pp.1525 - 1532, Elsevier BV, 2018-09 |
Effects of processing parameters on elastic deformation of the coil during the thin-strip coiling process Park, Wonwoong; Kim, Dong Kyu; Im, Yong-Taek; Kwon, Hyuck-Cheol; Chun, Myung-Sik, METALS AND MATERIALS INTERNATIONAL, v.20, no.4, pp.719 - 726, 2014-07 |
Efficient hybrid evolutionary algorithm for optimization of a strip coiling process Pholdee, Nantiwat; Park, Won-Woong; Kim, Dong-Kyu; Im, Yong-Taek; Bureerat, Sujin; Kwon, Hyuck-Cheol; Chun, Myung-Sik, ENGINEERING OPTIMIZATION, v.47, no.4, pp.521 - 532, 2015-04 |
Enhancement of accuracy in calculating fiber orientation distribution in short fiber reinforced injection molding = 단섬유 보강 사출성형 시 섬유 배향 해석의 정확도 향상에 관한 연구link Han, Kyeong-Hee; 한경희; et al, 한국과학기술원, 2000 |
Estimation of sink mark depth in compression molded SMC parts with substructures Jeong, JH; Im, Yong-Taek, JOURNAL OF COMPOSITE MATERIALS, v.31, no.21, pp.2161 - 2187, 1997-01 |
Experimental and numerical prediction of austenite grain size distribution in round-oval shape rolling Kwon, HC; Lee, Y; Im, Yong-Taek, ISIJ INTERNATIONAL, v.43, no.12, pp.1967 - 1975, 2003-06 |
Experimental and numerical study of the impact behavior of SMC plates Lee, S.-M.; Cheon, J.-S.; Im, Yong-Taek, 10th International Conference on Composite Structures, v.47, no.40547, pp.551 - 561, 1999-11-15 |
Experimental and numerical study of the impact behavior of SMC plates Lee, SM; Cheon, JS; Im, Yong-Taek, COMPOSITE STRUCTURES, v.47, no.1-4, pp.551 - 561, 1999-12 |
Experimental and numerical study of the impact behavior of SMC plates Lee, Sang-Min; Cheon, Jae-Seung; Im, Yong-Taek, Composite structures, Vol.47, No.1-4, pp.551-561, 1999-12 |
Experimental study of material behavior of AP-HTPB base composite solid propellant Kim, Shinhoe; Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.33, no.7, pp.3355 - 3361, 2019-07 |
Experimental study of miniaturized tip test Chauviere, P; Jung, KH; Kim, DK; Lee, HC; Kang, SH; Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.22, no.5, pp.924 - 930, 2008-05 |
Experimental Study of Process Design System for Forward Extrusion of Spur Gear Song, J.H.; Im, Yong-Taek, JSME/ASME Int. Conf. on Materials and Processing , pp.PLF-04 -, 2005-06 |
EXPERIMENTAL STUDY OF SURFACE IRREGULARITIES OF LOW CARBON STEEL IN HOT BAR ROLLING Lee, Ho-Won; Awais, Muhammad; Im, Yong-Taek; Lee, You-Hwan; Son, Il-Heon; Lee, Duk-Lak, STEEL RESEARCH INTERNATIONAL, v.79, no.2, pp.65 - 72, 2008-09 |
Experimental study of surface irregularities of low carbon steel in hot bar rolling Lee, H.W.; Awais, M.; Im, Yong-Taek; Lee, Y.H.; Son, I.H.; Lee, D.L., Metal Forming 2008, pp.65 - 72, AGH University of Science and Technology, 2008-09-01 |
Experimental study on physical properties of compression molded SMC parts under plane strain condition Kim, KT; Im, Yong-Taek, COMPOSITE STRUCTURES, v.35, no.2, pp.131 - 141, 1996-06 |
Expert System for Multi-stage Cold Forging Process Sequence Design Kim, H.S; Yoon, S.M; Im, Yong-Taek, NAMRC XXII SMETechnical Paper, MF94-132, pp.1 - 6, NAMRC, 1994-05 |
Expert system for multi-stage cold-forging process design with a re-designing algorithm Kim, Hong-Seo; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.54, no.1-4, pp.271 - 285, 1995-10 |
Expert system for the process sequence design of a ball stud Song, JH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.90Special, no.SI, pp.72 - 78, 1999-05 |
Fiber Orientation Prediction in Short Fiber Reinforced Injection Molding of Complex Cavity Shape Han, K.H; Im, Yong-Taek, International Symposium on Advanced Forming and Die Manufacturing Technology, pp.751 - 756, 1999-09 |
Finite Element Analysis of Free Surface Contact in Open-Die Forging Hahn, Y.W; Im, Yong-Taek, Fourth International Conference on Computational Palsticity:Fundamentals and Applications , pp.1399 - 1410, 1995-04 |
Finite element analysis of plastic deformation of CP-Ti by multi-pass equal channel angular extrusion at medium hot-working temperature Zhang, ZJ; Son, IH; Im, Yong-Taek; Park, Joong Keun, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.447, no.1-2, pp.134 - 141, 2007-02 |
Finite Element Analysis of Plastic Deformation of Porous Materials Im, Yong-Taek; Kobayashi, S., Metal forming and Impact mechanics(edited by Reid,S.R.), Pergamon Press , pp.103 - 122, 1985 |
Discover