| 143 | CAD/CAM of the lubricated cold extrusion process for gear manufacturing Yang, Dong-Yol; Lee, C.M.; Yoon, J.H., Proc. 1st ICDM , pp.417 - 424, 1990-01-01 |
| 144 | Calculation and verification of rotation angle of a four-axis hotwire cutter for transfer-type variable lamination manufacturing using expandable polystyrene foam Lee, SH; Ahn, DG; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.22, pp.175 - 183, 2003-09 |
| 145 | Characterization of Polymer Microtoroid Resonators Chang, Jee Soo; Lee, Seung Hoon; Son,Yong; Prem, Prabhakaran; Lee, Kwang-Sup; Park, Namkyoo; Yang, Dong-Yol, CLEO2011, CLEO, 2011-05-01 |
| 146 | Comparative Investigation into 3-D Finite Element Analysis for Sheet Metal Forging of a Rectangular Cup with Beads-Comparison of Material Modeling, Ti Yang, Dong-Yol; Lee, S. W.; Yoon, J. W.; Lee, D. W., invited paper of ICFP, 1998 |
| 147 | COMPARATIVE INVESTIGATION INTO IMPLICIT, EXPLICIT, AND ITERATIVE IMPLICIT EXPLICIT SCHEMES FOR THE SIMULATION OF SHEET-METAL FORMING PROCESSES Yang, Dong-Yol; JUNG, DW; SONG, IS; YOO, DJ; LEE, JH, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.50, no.1-4, pp.39 - 53, 1995-03 |
| 148 | Comparative Investigation into Implicit, Explicit, and Iterative Implicit/Explicit Schemes for Simulation of Sheet Metal Forming Processes Yang, Dong-Yol; Jung, D.W.; Song, I.S.; Yoo, D.J.; Lee,J.H., Proceedings 2nd International Conference on Sheet Metal Forming Process-NUMISHEET'93, pp.35 - 52, 1993 |
| 149 | Comparative investigation into the dynamic explicit and the static implicit method for springback of sheet metal stamping Lee, SW; Yoon, Jeong Whan; Yang, Dong-Yol, ENGINEERING COMPUTATIONS, v.16, no.2-3, pp.347 - 373, 1999 |
| 150 | Comparative investigation of sheet metal forming processes by the elastic-plastic finite element method with emphasis on the effect of bending Yang, Dong-Yol; Shim, HB; Chung, WJ, ENGINEERING COMPUTATIONS, v.7, no.4, pp.274 - 283, 1990-12 |
| 151 | Compressive and shear responses of shaped-sheet pyramidal truss core for reinforced sandwich structure Lee, Sung-Uk; Lee, Dong-Hyo; Lee, Eun Ho; Yang, Dong-Yol, 11th International Conference on Technology of Plasticity, ICTP 2014, pp.1121 - 1126, Elsevier Ltd, 2014-10 |
| 152 | Compressive Behaviors of a Sandwich Plate with Structurally Stiffened Pyramidal Truss Core Lee, S.U.; Seong, D.Y.; Yang, Dong-Yol, ICTP 2011, ICTP, 2011-09-01 |
| 153 | Compressive Instability Phenomena During Springback Kim, JB; Yoon, Jeong Whan; Yang, Dong-Yol, AIP Conference Proceedings, v.908, pp.619 - 624, 2007 |
| 154 | Computationally Efficient Elasto-plastic Implicit Finite Element Analysis for Complicated Sheet Metal Forming Processes Yang, Dong-Yol; Yoon, J. W., Proc. 19th IDDRG'96 , pp.25 - 31, Proc. 19th IDDRG'96, 1996 |
| 155 | Computationally efficient finite element analysis method incorporating virtual equivalent projected model for metallic sandwich panels with pyramidal truss cores Seong D.-Y.; Jung C.; Yang, Dong-Yol, MATERIALS PROCESSING AND DESIGN; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes, pp.949 - 954, 2007-06-17 |
| 156 | COMPUTER-AIDED NUMERICAL-ANALYSIS AND DESIGN FOR COLD-EXTRUSION OF A SPUR GEAR Yang, Dong-Yol; YOON, JH; LEE, CM, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.204, no.3, pp.203 - 209, 1990 |
| 157 | Computer-Integrated Simulation System for Die Design and Manufacture of Automobile Sheet Panels Yang, Dong-Yol; Yoon, J. W.; Lee, S. W.; Lee, D. W., CIRP '97, 1997-01-01 |
| 158 | Concurrent Engineering Approach to the Die Design of Metal Forming Processes Using Rapid Prototyping and Finite Element Analysis Yang, Dong-Yol; Park, K.; Yoon, J. W.; Cho, J. R., ISATA '97, pp.105 - 111, 1997 |
| 159 | Consideration of geometric nonlinearity in rigid-plastic finite element formulation of continuum elements for large deformation Lee, DW; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.39, no.12, pp.1423 - 1440, 1997-12 |
| 160 | Contour Offset Algorithm (COA) in nano Replication Printing (nRP) for Fabricating Nano-Precision Features Yang, Dong-Yol; Lim, T.W.; Park,S.H.; Yi, S.W.; Kong, H.J.; Lee, K.S., ISNM, pp.295 - 299, 2004 |
| 161 | Contour Offset Algorithm (COA) in nano Replication Printing (nRP) for fabricating nano-precision features Lim, TW; Park, SH; Yang, Dong-Yol; Yi, SW; Kong, Hong-Jin; Lee, KS, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.19, pp.2105 - 2111, 2005-11 |
| 162 | Contour offset algorithm for precise patterning in two-photon polymerization Lim, TW; Park, SH; Yang, Dong-Yol, MICROELECTRONIC ENGINEERING, v.77, no.3-4, pp.382 - 388, 2005-04 |
| 163 | Cutting path generation of linear hotwire cutter for VLM-ST Lee, SH; Ahn, DG; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.30, no.5-6, pp.401 - 415, 2006-09 |
| 164 | Design and analysis of hollow section extrusion of the underframe part of a railroad vehicle using mismatching refinement with domain decomposition Park, K; Lee, YK; Yang, Dong-Yol; Lee, DH, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.215, no.3, pp.383 - 394, 2001 |
| 165 | Design and development of a lightweight metallic sandwich panel using cross-sectionally curved pyramidal truss cores = 피라미드 내부 구조재의 단면형상을 성형한 경량 금속샌드위치 소재의 설계에 관한 연구link Lee, Sung-Uk; 이성욱; et al, 한국과학기술원, 2016 |
| 166 | Design and development of a metallic sandwich plate with truss type 3-dimensional inner structures = 3차원 트러스형 구조를 내부에 가지는 금속 샌드위치 판재의 설계 및 제작공정 개발에 관한 연구link Jung, Chang-Gyun; 정창균; et al, 한국과학기술원, 2009 |
| 167 | Design and Development of Trial Die Casting process by using Rapid Prototyping Yang, Dong-Yol; Kim, K. D.; Heong, J. H.; Park, T. K., Rapid Prototyping & Manufacturing '99, 1999 |
| 168 | Design and fabrication of lightweight metallic sandwich plates with three-dimensional inner structures Yang, Dong-Yol, ASIASTEEL2009, 2009-05 |
| 169 | Design map of bendable metallic sandwich plates for U-bending Seong, D. Y.; Jung, C.G.; Yang, Dong-Yol; Chung, W.J.; Kim, J.H., ASIASTEEL 2009, 2009-05 |
| 170 | Design of hollow section extrusion process for manufacturing a triply-connected rectangular tubular section with improved flow control Yang, Dong-Yol; Park, K., CIRP1999, 1999 |
| 171 | Design of Precision Process using Three-Dimensional Rigid-Plastic Finite Element Analysis Yang, Dong-Yol; Park, K.; Kang, Y. S., CIRP STC , 1997-01-01 |
| 172 | Design of processes and products through simulation of three-dimensional extrusion Yang, Dong-Yol; Kim, KJ, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.191, no.1-3, pp.2 - 6, 2007-08 |
| 173 | Design optimization for three-dimensional extrusion processes Yang, Dong-Yol; Lee S.-R.; Kim K.-J., MATERIALS PROCESSING AND DESIGN; Modeling, Simulation and Applications - NUMIFORM '07: 9th International Conference on Numerical Methods in Industrial Forming Processes, pp.275 - 280, 2007-06-17 |
| 174 | Design optimization for three-dimensional forming processes by an approximation scheme based on state variable linearization = 상태변수 선형화에 기초한 근사최적화법에 의한 3차원 금속 성형 공정의 최적 설계link Lee, Seok-Ryol; 이석렬; et al, 한국과학기술원, 2006 |
| 175 | Determination of Frictional Coefficient of Sheet Metal Working and its Application to Stretch Forming Lee, C. H.; Shim, H. B.; Yang, Dong-Yol, Proceedings of 6th International Congress on Experimental Mechanics, pp.71 - 76, 1988-06-01 |
| 176 | Development and finite element simulation of vibration assisted casting process = 진동 부가 주조 공정의 개발 및 충전 과정의 수치적 모사link Kim, Ki-Don; 김기돈; et al, 한국과학기술원, 2004 |
| 177 | Development of a bendable pyramidal kagome structure and its structural characteristics Hwang, June-Sun; Choi, Tae-Gyun; Lee, Dongyoung; Lyu, Min-Young; Lee, Dai Gil; Yang, Dong-Yol, COMPOSITE STRUCTURES, v.142, pp.87 - 95, 2016-05 |
| 178 | Development of a cold incremental rolling process using a line array roll set for the manufacture of doubly curved metal plates = 이중 곡률의 금속 판재 성형을 위한 선형 배열 롤 셋을 이용한 냉간 점진적 롤 성형 공정 개발link Shim, Do-Sik; 심도식; et al, 한국과학기술원, 2010 |
| 179 | Development of a continuous fabrication system for a metallic sandwich plate with a three-dimensional truss core Jung, C. G.; Seung, D. Y.; Yang, Dong-Yol; Na, Suck-Joo; Ahn, D. G., INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v.45, no.3-4, pp.352 - 361, 2009-11 |
| 180 | Development of a flexible forming system using the incremental roll forming process for the manufacture of a doubly curved sheet metal = 이중곡률의 판재 성형을 위한 점진적 롤 성형 방식의 유연성형시스템 개발link Yoon, Seok-Joon; 윤석준; et al, 한국과학기술원, 2005 |
| 181 | Development of a flexible incremental forming process to manufacture asymmetric shafts = 비대칭 축류형 제품의 점진성형공정 개발link Altun, Ali Ozhan; Yang, Dong-Yol; et al, 한국과학기술원, 2005 |
| 182 | Development of a grid-based mesh generation technique and its application to remeshing during the finite element simulation of a metal forming process Lee, YK; Yang, Dong-Yol, ENGINEERING COMPUTATIONS, v.16, no.2-3, pp.316 - 336, 1999 |
| 183 | Development of a highly flexible incremental roll forming process for the manufacture of a doubly curved sheet metal Yoon, SJ; Yang, Dong-Yol, CIRP ANNALS-MANUFACTURING TECHNOLOGY, v.52, no.1, pp.201 - 204, 2003 |
| 184 | Development of a highly Flexible Incremental rolling process for the manufacture of a doubly curved sheet metal Yang, Dong-Yol; Yoon, S.J., CIRP, pp.0 - 0, 2003-08 |
| 185 | DEVELOPMENT OF A NEW COMPUTER-AIDED MANUFACTURING SYSTEM FOR THE HOT RING-ROLLING PROCESS. Yang, Dong-Yol; Lee C.S.; Cho, Hyungsuck; Lee C.W.; Cho N.S.; Ryoo J.S., Proceedings of the 3rd International Conference on Rotary Metalworking Processes., pp.229 - 238, 1984 |
| 186 | Development of a Plaster Die-Casting Machine and Process using Combined Pressurization and Vibration Based on Rapid Prototyping Kim, K. D.; Yang, Dong-Yol; Park ,T. K., The 8th Int. Conf. On R.P, 1999 |
| 187 | Development of a rapid heat ablation (RHA) process using a hot tool Kim, HC; Lee, SH; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.47, no.1, pp.124 - 132, 2007-01 |
| 188 | Development of a tube-ECAE process to improve the mechanical properties of a metal tube Kim, KJ; Lee, SU; Yang, Dong-Yol; Yoon, Jeong Whan, 9th International Conference on Technology of Plasticity, ICTP 2008, pp.2295 - 2299, International Centre for Theoretical Physics, 2008-08 |
| 189 | Development of an Innovative Bending Process Employing Synchronous Incremental Heating and Incremental forming Yang, Dong-Yol; Park, J.C.; Seong, D.Y.; Park, J.C., ICTP 2011, ICTP, 2011-09-01 |
| 190 | Development of basic operating and motion-transforming elements based on elastic design and their applications = 탄성 설계를 이용한 정밀 기본 구동 및 운동 전환 요소의 개발과 응용link Ha, Cheol Woo; 하철우; et al, 한국과학기술원, 2016 |
| 191 | Development of Computer Integrated System Supporting Design of Process and Dies of Multiple Stage Forging Processes Yang, Dong-Yol; Im, Yong-Taek; Lee,Y.K.; Park, C.H.; Song, J.H.; Lee,Y.S.; Yoh, E.G.; et al, International Conference on Technology of Plasticity 1999, pp.149 - 154, 1999-09 |
| 192 | Development of dual scale scaffolds via direct polymer melt deposition and electrospinning for applications in tissue regeneration Park, Suk-Hee; Kim, Taek-Gyoung; Kim, Hyo-Chan; Yang, Dong-Yol; Park, Tae-Gwan, ACTA BIOMATERIALIA, v.4, no.5, pp.1198 - 1207, 2008-09 |
| 193 | Development of Full-automated VLM-st Process and its Apparatus Yang, Dong-Yol; Ahn, D.G.; Lee, S.H.; Kim, H.C.; Park, S.K.; Kim, C.K., RP&M, pp.0 - 0, 2004-08-01 |
| 194 | Development of Full-Automated VLM-st Process and Its Apparatus Yang, Dong-Yol, SME, TECHANICAL REPORT, 2004-03 |
| 195 | Development of innovative rapid prototyping system Yang, Dong-Yol; Ahn, D.G.; Lee, S.H.; Choi, H.S., Proc. of the 35th CIRP International Seminar on Manufacturing systems, pp.523 - 528, 2002 |
| 196 | Development of Integrated and Intelligent Design and Analysis System Yang, Dong-Yol; Im,Y. T.; Yoo,Y.C.; Park, J. J.; Kim, J. H.; Chun, M. S.; Lee, C. H.; et al, CIRP, pp.177 - 180, 2000 |
| 197 | Development of Integrated and Intelligent Design and Analysis System for Forging Processes Yang, Dong-Yol; Im,Y. T.; Yoo,Y.C.; Park, J.J.; Kim, J.H., CIRP 2000, CIRP 2000, 2000-08 |
| 198 | Development of large-area 3D fabrication process using continuous scanning method and its micro-applications = 연속적 스캐닝 방법을 이용한 대면적 극미세 3차원 형상 제작기술 개발 및 응용link Lim, Tae-Woo; 임태우; et al, 한국과학기술원, 2010 |
| 199 | Development of nano-stereolithography process for the direct fabrication of three-dimensional nano/microstructures Park, S. H.; Lim, T. W.; Yang, Dong-Yol, UM-KAIST Joint Symposium, pp.0 - 0, 2005-11 |
| 200 | Development of nanofiber-based 3D biomimetic scaffold for tissue engineering applications Park, Suk-hee; Ko, Unghyun; Park, Jinho; Yang, Dong-Yol; Shin, Jennifer Hyunjong; Lee, Nak Kyu, Biofabrication2014(ICB2014, International society for biofabrication, 2014-09-29 |
| 201 | Development of Plater Die-Casting Machine and Process using Combined Pressurization and Vibration Based on Rapid Prototyping Yang, Dong-Yol; Kim, K. D., The 8th Internation Conference on Rapid Prototyping, pp.377 - 382, 2000 |
| 202 | Development of Process Design Program for Manufacture of Desired Shapes using Line Array Roll Set (LARS) Process Shim, Do-Sik; Yang, Dong-Yol; Lee, Don-Jin; Han, Myoung-Soo, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.14, no.8, pp.1501 - 1504, 2013-08 |
