626 | 자유 환상 압연에 관한 이론과 실험적 연구 = An analytical and experimental study on the free ring-rolling processlink 조남선; Cho, Nam-Seon; et al, 한국과학기술원, 1980 |
627 | 재인발 가공에서의 한계 인발비 및 성형 하중 예측에 관한 연구 = A study on the prediction of limit-drawing ratio and forming load in redrawinglink 박장호; Park, Jang-Ho; et al, 한국과학기술원, 1981 |
628 | 적외선 온도센서를 이용한 GMA용접 품질 모니터링에 관한 연구 = A study on the monitoring of weld quality using IR temperature sensor in GMA welding processlink 김병만; Kim, Byung-Man; 조형석; 양동열; et al, 한국과학기술원, 1996 |
629 | 전자 박판 부품의 가공성 평가에 대한 연구 = Estimation of formability for sheet metal forming of electronic partslink 이병찬; Lee, Byoung-Chan; et al, 한국과학기술원, 1995 |
630 | 중첩된 박판간의 결합을 위한 접착-성형공정에 관한 연구 = Investigation into a new form-joining process with the aid of adhesive for joining of a sheet metal pairlink 정창균; Jeong, Chang-Gyun; et al, 한국과학기술원, 2003 |
631 | 채색된 내부 형상을 포함한 광조형물의 쾌속조형공정 개발 및 공정변수 분석 = Inner visible color prototype fabrication process using rapid prototyping and analysis of processlink 박종철; Park, Jong-Cher; et al, 한국과학기술원, 2009 |
632 | 초소성 박판 성형 공정의 유한 요소 압력 제어 해석 Huh, Hoon; Han, Soo Sik; Yang, Dong-Yol; Lee, Jong Soo, 대한기계학회논문집, Vol.15, No.5, pp.1563-1571, 1991 |
633 | 최적응답특성을 갖는 부하적응유압속도 제어기 설계에 관한 연구 = A study on the design of load adaptive hydraulic velocity controller with the optimal responselink 범희락; Beom, Hee-Rak; 조형석; 양동열; et al, 한국과학기술원, 1985 |
634 | 축 대칭 Hydroforming 공정에 의한 유한 요소 해석 = Finite element analysis of the axisymmetric hydroforming processlink 최선준; Choi, Sun-Jun; et al, 한국과학기술원, 1984 |
635 | 축 대칭 복합 압출에 관한 상계해 = An upper bound analysis of the axisymmetric combined extrusionlink 김용환; Kim, Yong-Hwan; et al, 한국과학기술원, 1981 |
636 | 축대칭 hydroforming 공정의 상계해석 = An upper-bound analysis of the axisymmetric hydroforming processlink 박영현; Park, Young-Hyun; et al, 한국과학기술원, 1986 |
637 | 축대칭 및 평면 변형 단조의 열-점소성 유한 요소 해석 = Thermo-viscoplastic finite element analysis of axisymmetric and plane strain forginglink 천명식; Cheon, Myeong-Sig; et al, 한국과학기술원, 1988 |
638 | 축대칭 유한 요소 해석에서 단위체 격자 재구성법과 퍼지 로직을 이용한 전방투사법 = Forward projection using modular remeshing and fuzzy logic in axisymmetric finite element simulationlink 정낙면; Jung, Nak-Myeon; et al, 한국과학기술원, 1992 |
639 | 축대칭 하이드로 미케니칼 디프 드로잉 공정의 유한 요소 해석 = Finite element analysis of axisymmetric hydro-mechanical deep drawing processlink 김한경; Kim, Han-Gyeong; et al, 한국과학기술원, 1990 |
640 | 쾌속조형을 이용한 다이 캐스팅 제품의 시작 공정 설계 및 제작 = Design and development of trial die casting process by using rapid prototypinglink 김기돈; Kim, Ki-Don; et al, 한국과학기술원, 1999 |
641 | 트리밍 없는 볼트 성형에 대한 연구 = A stydy onthe trimless bolt-heading and bulge profilelink 최영; Choi, Young; et al, 한국과학기술원, 1981 |
642 | 펨토초 레이저를 이용한 극미세 광조형 시스템의 정밀도 향상을 위한 복셀 차감법에 관한 연구 = Improvement of precision using contour offset algorithm (COA) in ultramicro stereolithography by femtosecond laserlink 임태우; Lim, Tae-Woo; et al, 한국과학기술원, 2004 |
643 | 펨토초 레이저의 초점면 방향 제어를 통한 다방향 어블레이션 공정 개발에 관한 연구 = A study on multi-directional ablation process with controlling the focal plane of femtosecond laserlink 하철우; Ha, Cheol-Woo; 양동열; Yang, Dong-Yol; 김승우; Kim, Seung-Woo; et al, 한국과학기술원, 2011 |
644 | 평금형을 이용한 축대칭 열간 압출의 유한요소해석 = Finite element analysis of axisymmetric hot extrusion through square dieslink 강연식; Kang, Yeon-Sick; et al, 한국과학기술원, 1991 |
645 | 평면 응력 Bore expanding 에 있어서의 평면 이방성의 영향 = The effect of planar anisotropy in plane-stress bore expandinglink 주진원; Joo, Jin-Won; 양동열; 이중홍; et al, 한국과학기술원, 1983 |
646 | 평행해법을 이용한 박판 성형의 단면 해석 = Sectional analysis of sheet metal forming using the equilibrium approachlink 윤정환; Yoon, Jeong-Hwan; et al, 한국과학기술원, 1993 |
647 | 포트홀 금형을 이용한 원형 튜브의 3차원 압출에서 압접 강도 개선을 위한 연구 = Improvement of welding strength in three dimensional extrusion of tubes using porthole dieslink 김경진; Kim, Kyung-Jin; et al, 한국과학기술원, 2001 |
648 | 표면적응층을 가지는 새로운 자동격자 재구성 기법과 2차원 단조공정의 강소성 유한요소 해석에의 응용 = A new automatic remeshing technique with surface adaptive layer and its application to rigid-plastic finite element analysis of two-dimensional forging processlink 이영규; Lee, Young-Kyu; et al, 한국과학기술원, 1993 |
649 | 플라즈마 디스플레이 패널용 격벽의 초정밀 제작에 관한 연구 = A study on ultra-precision fabrication of barrier rib for plasma display panel using a roll-forming processlink 류승민; Ryu, Seung-Min; et al, 한국과학기술원, 2005 |
650 | 플래퍼-노즐 밸브를 이용한 전기 비례 릴리이프 밸브의 정적 해석 = Static characteristics of electro-magnetic relief valve using flapper-nozzle valvelink 김영국; Kim, Young-Guk; 양동열; 조형석; et al, 한국과학기술원, 1986 |
651 | 플랜지를 갖는 축류형 부품의 점진적인 반경-축방향 복합단조 공정개발에 관한 연구 = Study on incremental radial-axial forging of flanged shaft partslink 이경훈; Lee, Kyung-Hoon; et al, 한국과학기술원, 2003 |
652 | 플레인징 공정의 성형한계에 대한 이론 및 실험적 연구 = A theoretical and experimental study on forming limits in the flanging processeslink 박승교; Park, Seung-Kyo; et al, 한국과학기술원, 1985 |
653 | 피이드포워드 보상을 이용한 저온액조의 온도제어에 관한 연구 = A study on the design of a digital controller for the low temperature container using the feedforward compensationlink 이창한; Lee, Chang-Han; 양동열; 조형석; et al, 한국과학기술원, 1986 |
654 | 행렬법을 이용한 환상압연의 슬립라인 해석 = A slip line analysis of the ring rolling process using a matrix methodlink 정완진; Jung, Wan-Jin; et al, 한국과학기술원, 1985 |
655 | 힘다각형 선도법을 이용한 세롤에 의한 파워스피닝 공정의 해석 = A study on the three-roll power spinning process by using the method of force polygon diagramlink 유동진; Yoo, Dong-Jin; et al, 한국과학기술원, 1985 |