Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Article

Showing results 7501 to 7560 of 12260

7501
Pressure drop correlations for two-phase flow within horizontal rectangular channels with small heights

Lee, HJ; Lee, Sang Yong, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, v.27, no.5, pp.783 - 796, 2001-05

7502
Pressure drop of two-phase dry-plug flow in round mini-channels: Effect of moving contact line

Lee, Chi Young; Lee, Sang Yong, EXPERIMENTAL THERMAL AND FLUID SCIENCE, v.34, no.1, pp.1 - 9, 2010-01

7503
Pressure drop of two-phase plug flow in round mini-channels: Influence of surface wettability

Lee, Chi Young; Lee, Sang Yong, EXPERIMENTAL THERMAL AND FLUID SCIENCE, v.32, no.8, pp.1716 - 1722, 2008-09

7504
Pressure Insensitive Strain Sensor with Facile Solution-Based Process for Tactile Sensing Applications

Oh, Jinwon; Yang, Jun Chang; Kim, Jin-Oh; Park, Hyunkyu; Kwon, Se Young; Lee, Serin; Sim, Joo Yong; et al, ACS NANO, v.12, no.8, pp.7546 - 7553, 2018-08

7505
Pressure loss effect on recuperative heat exchanger and its thermal performance

Hwang, Gyu-Wan; Jeong, Sang-Kwon, CRYOGENICS, v.50, pp.13 - 17, 2010-01

7506
PRESSURE MODEL BASED COORDINATED CONTROL OF VGT AND DUAL-LOOP EGR IN A DIESEL ENGINE AIR-PATH SYSTEM

Kim, S.; Choi, Seibum B; Jin, H., INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.17, no.2, pp.193 - 203, 2016-04

7507
Pressure resistance of the corrugated stainless steel membranes of LNG carriers

Kim, Byung-Chul; Yoon, Soon-Ho; Lee, Dai-Gil, OCEAN ENGINEERING, v.38, no.4, pp.592 - 608, 2011-03

7508
Pressure Sensitive Paint를 이용한 압력장 측정기술의 이미지 등록에 관한 연구

성형진; 박상현; 장영기, 대한기계학회논문집 B, v.28, no.3, pp.271 - 280, 2004-03

7509
Pressure-dependent synthesis of high-quality few-layer graphene by plasma-enhanced arc discharge and their thermal stability

Kumar, Rajesh; Singh, Rajesh Kumar; Dubey, Pawan Kumar; Kumar, Pradip; Tiwari, Radhey Shyam; Oh, Il-Kwon, JOURNAL OF NANOPARTICLE RESEARCH, v.15, no.9, 2013-08

7510
Pressure-resisting capability of the knot area of the primary barrier for a LNG containment system

Lee, Dongyoung; Kim, Ki Hyun; Choi, Ilbeom; Lee, Dai-Gil, OCEAN ENGINEERING, v.95, pp.128 - 133, 2015-02

7511
Pressure-volume-temperature gauging method experiment using liquid nitrogen under microgravity condition of parabolic flight

Seo, Mansu; Park, Hana; Yoo, Dong Gyu; Jung, Young Suk; Jeong, Sangkwon, Progress in Superconductivity and Cryogenics (PSAC), v.16, no.2, pp.64 - 69, 2014-06

7512
Pressurized diesel fuel processing using hydrogen peroxide for the fuel cell power unit in low-oxygen environments

Lee, Kwangho; Han, Gwangwoo; Cho, Sungbaek; Bae, Joongmyeon, JOURNAL OF POWER SOURCES, v.380, pp.37 - 45, 2018-03

7513
Pressurized drop tube furnace tests of global coal gasification characteristics

Shin, Y; Choi, Sangmin; Ahn, DH, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, v.24, no.9, pp.749 - 758, 2000-07

7514
Preventing Gas Hydrate Agglomeration with Polymer Hydrogels

Seo, Yu Taek; Shin, Kyuchul; Kim, Hyun Ho; Wood, Colin D.; Tian, Wendy; Kozieski, Karen A., ENERGY & FUELS, v.28, no.7, pp.4409 - 4420, 2014-07

7515
Prevention of methane hydrate re-formation in transport pipeline using thermodynamic and kinetic hydrate inhibitors

Kim, Jakyung; Kim, Hyunho; Sohn, Young Hoon; Chang, Daejun; Seo, Yutaek; Kang, Seong-Pil, JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, v.154, pp.114 - 125, 2017-06

7516
Prevention of Water Permeation by Strong Adhesion Between Graphene and SiO2 Substrate

Jung, Wonsuk; Park, Joonkyu; Yoon, Taeshik; Kim, Taek-Soo; Kim, Soohyun; Han, Chang-Soo, SMALL, v.10, no.9, pp.1704 - 1711, 2014-05

7517
Preview Control of Active Vehicle Suspensions Based on a State and Input Estimator

Park, Youngjin; Roh, HS, SAE Special Publications(SAE SP), no.1338, pp.201 - 208, 1998

7518
A PRIDICTION MODEL FOR THE VORTEX SHEDDING NOISE FROM THE WAKE OF AN AIRFOIL OR AXIAL FLOW FAN BLADES

Lee, C.; Chung, M.K.; Kim, Y.-H., Journal of sound and vibration v.164 no.2 pp.327-336, 1993

7519
Primary and Secondary Instabilities in a Glass Melting Furnace

Lim, K.O.; Lee, K.S.; Song, Tae-Ho, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, v.V.36, pp.309 - 325, 1999

7520
Primary stability of cementless stem in THA improved with reduced interfacial gaps

Park, Youngbae; Shin, HoChul; Choi, Donk; Albert, Carolyne; Yoon, Yong-San, JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, v.130, no.2, 2008-04

7521
Printed fabric heater based on Ag nanowire/carbon nanotube composites

Ahn, Junseong; Gu, Jimin; Hwang, Boyeon; Kang, Hyeokjung; Hwang, Soonhyoung; Jeon, Sohee; Jeong, Junho; et al, NANOTECHNOLOGY, v.30, no.45, 2019-11

7522
Printing of Woodpile Scaffold Using Fresnel Lens for Tissue Engineering

Ho, Chee Meng Benjamin; Hu, Kan; Mishra, Abhinay; Noh, Jinhong; Kim, Jeonghwan; Lee, Suhan; Yoon, MinSung; et al, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, v.9, no.2, pp.507 - 522, 2022-03

7523
Probabilistic analytical target cascading using kernel density estimation for accurate uncertainty propagation

Jung, Yongsu; Lee, Jongmin; Lee, Mingyu; Kang, Namwoo; Lee, Ikjin, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.61, no.5, pp.2077 - 2095, 2020-05

7524
Probabilistic modeling of ship powering performance using full-scale operational data

Yoo, Byunghyun; Kim, Jinwhan, APPLIED OCEAN RESEARCH, v.82, pp.1 - 9, 2019-01

7525
Probabilistic sensitivity analysis for novel second-order reliability method (SORM) using generalized chi-squared distribution

Yoo, David; Lee, IkJin; Cho, Hyunkyoo, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.50, no.5, pp.787 - 797, 2014-11

7526
Process design for closed-die forging of bevel gear by finite element analyses

Song, JH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.192-193, no.SI, pp.1 - 7, 2007-08

7527
Process design for refinement and homogenization of microstructure in bar rolling

Kwon, Hyuck-Chul; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.167, no.2, pp.273 - 282, 2005-08

7528
Process Design for Refinement and Homogenization of Microstructure in Bar Rolling

Im, Y.T.; Kwon, H.C., Journal of Materials Processing Technology, VoI.167, No.2-3, pp.273-282, 2005-08

7529
Process design of combined deep drawing and electromagnetic sharp edge forming of DP980 steel sheet

Choi, M. K.; Huh, H.; Park, Namsu, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.244, pp.331 - 343, 2017-06

7530
Process design of high-strength bolt of fully pearlitic high-carbon steel

Lee, Hyun-Chul; Jin, Young-Gwan; Lee, You-Hwan; Son, Il-Heon; Lee, Duk-Lak; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.210, no.14, pp.1870 - 1875, 2010-11

7531
Process designing for laser forming of circular sheet metal

Nadeem, Q; Seong, WJ; Na, Suck-Joo, CHINESE OPTICS LETTERS, v.10, no.2, 2012-02

7532
Process of measurement error treatment using model selection and local intensive smoothing and application to refractive index estimation of water

Lee, Kyungeun; Kim, Joong Bae; Park, Jeong Woo; Lee, Bong Jae; Lee, Ikjin, APPLIED PHYSICS B-LASERS AND OPTICS, v.126, no.4, 2020-03

7533
Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms

Pholdee, Nantiwat; Baek, Hyun Moo; Bureerat, Sujin; Im, Yong-Taek, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.29, no.8, pp.3427 - 3436, 2015-08

7534
PROCESS SEQUENCE DESIGN OF LARGE AXISYMMETRICAL FORGING PRODUCT OF AISI4130 IN NOZZLE TYPE

CHU, ED; Im, Yong-Taek; KIM, N; LEE, J, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.48, no.1-4, pp.143 - 149, 1995-01

7535
Process simulation of iron ore sintering bed with flue gas recirculation Part 1 - Modelling approach

Ahn, H.; Choi, Sangmin; Cho, B., IRONMAKING & STEELMAKING, v.40, no.2, pp.120 - 127, 2013-02

7536
Process simulation of iron ore sintering bed with flue gas recirculation Part 2 - Parametric variation of gas conditions

Ahn, H.; Choi, Sangmin; Cho, B., IRONMAKING & STEELMAKING, v.40, no.2, pp.128 - 137, 2013-02

7537
Processable high internal phase Pickering emulsions using depletion attraction

Kim, KyuHan; Kim, Subeen; Ryu, Jiheun; Jeon, Jee-Yeon; Jang, Se Gyu; Kim, Hyunjun; Gweon, Dae-Gab; et al, NATURE COMMUNICATIONS, v.8, 2017-02

7538
Processing Challenges and Delamination Prevention Methods in Titanium-Steel DED 3D Printing

Andreu, Alberto; Kim, Sanglae; Kim, Insup; Kim, Jeong-Hwan; Noh, Jinhong; Lee, Suhan; Lee, Wonhee; et al, International Journal of Precision Engineering and Manufacturing-Green Technology, 2024-03

7539
Processing map approach for surface defect prediction in the hot bar rolling

Kim, HY; Kwon, HC; Lee, HW; Im, Yong-Taek; Byon, SM; Park, HD, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.205, no.1-3, pp.70 - 80, 2008-08

7540
Product data quality assurance for e-manufacturing in the automotive industry

Yang, J; Han, Soonhung; Kang, H; Kim, J, INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, v.19, no.2, pp.136 - 147, 2006-03

7541
Profile-based feature representation method and its application in data exchange from mechanical CAD systems to ship CAD systems

Li, Jinggao; Mun, Duhwan; Han, Soonhung, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.30, no.12, pp.5641 - 5649, 2016-12

7542
Prognose zur Warmeleistung einer Industrieerdgasfeuerung

Song, Tae-Ho; Viskanta, R., Industriefeunerung, no.41, pp.36 - 49, 1987

7543
Programmable Fabrication of Submicrometer Bent Pillar Structures Enabled by a Photoreconfigurable Azopolymer

Jo, Wonhee; Choi, Jaeho; Kang, Hong Suk; Kim, Mingeon; Baik, Sangyul; Lee, Bong Jae; Pang, Changhyun; et al, ACS APPLIED MATERIALS & INTERFACES, v.12, no.4, pp.5058 - 5064, 2020-01

7544
Programmable Liquid Crystal Defect Arrays via Electric Field Modulation for Mechanically Functional Liquid Crystal Networks

You, Ra; Kang, Sumin; Lee, Changjae; Jeon, Jisoo; Wie, Jeong Jae; Kim, Taek-Soo; Yoon, Dong Ki, ACS APPLIED MATERIALS & INTERFACES, v.13, no.30, pp.36253 - 36261, 2021-08

7545
Programming Anisotropic Functionality of 3D Microdenticles by Staggered-Overlapped and Multilayered Microarchitectures

Park, Jeong Eun; Je, Hyeongmin; Kim, Chae Ryean; Park, Sudong; Yu, Yeonuk; Cho, Woongbi; Won, Sukyoung; et al, ADVANCED MATERIALS, v.36, no.7, 2024-02

7546
Progress in Intracoronary Optical Coherence Tomography

Suter, Melissa Jane; Tearney, Guillermo J.; Oh, Wang-Yuhl; Bouma, Brett E., IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS, v.16, no.4, pp.706 - 714, 2010

7547
Promotion of Myogenic Maturation by Timely Application of Electric Field Along the Topographical Alignment

Ko, Ung Hyun; Park, Sukhee; Bang, Hyunseung; Kim, Mina; Shin, Hyunjun; Shin, Jennifer H., TISSUE ENGINEERING PART A, v.24, no.9-10, pp.752 - 760, 2018-05

7548
Propagation and quenching of premixed flames in a concentration-length-velocity diagram

Jung, Yongjin; Lee, Min-Jung; Kim, Nam Il, PROCEEDINGS OF THE COMBUSTION INSTITUTE, v.36, no.3, pp.4243 - 4251, 2017

7549
Propagation of Orifice- and Nozzle-Generated Vortex Rings in Air

Syed, AH; Sung, Hyung Jin, JOURNAL OF VISUALIZATION, v.12, no.2, pp.139 - 156, 2009

7550
PROPAGATION OF THE TEMPERATURE FRONT IN HEAT-UP OF AN INITIALLY ISOTHERMAL FLUID

Hyun, Jae Min, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.29, no.3, pp.499 - 501, 1986-03

7551
PROPAGATION OF THE VELOCITY SHEAR FRONT IN SPIN-UP FROM REST IN A CUT-CONE

KIM, JW; Hyun, Jae Min, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, v.117, no.1, pp.58 - 61, 1995-03

7552
Properties and Astrophysical Implications of the 150 M Binary Black Hole Merger GW190521

Abbott, B. P.; Noh, Minkyun, ASTROPHYSICAL JOURNAL LETTERS, v.900, no.1, 2020-09

7553
Properties and Reliability of Solder Microbump Joints Between Si Chips and a Flexible Substrate

Ko, Yong Ho; Kim, Min-Su; Bang, Junghwan; Kim, Taek-Soo; Lee, Chang-Woo, JOURNAL OF ELECTRONIC MATERIALS, v.44, no.7, pp.2458 - 2466, 2015-07

7554
Properties of (Pr1-xSrx)CoO3-delta as a cathode material for intermediate tempature-operating soild oxide fuel cell(IT-SOFC)

Bae, Joongmyeon, THE 7TH EUROPEAN SOLID OXIDE FUEL CELL FORUM, v.0, no.0, pp.0 - 0, 2006

7555
Properties of La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF) double layer cathodes on gadolinium-doped cerium oxide (CGO) electrolytes - I. Role of SiO2

Bae, Joongmyeon; Steele, BCH, SOLID STATE IONICS, v.106, no.3-4, pp.247 - 253, 1998-02

7556
Properties of La0.6Sr0.4Co0.2Fe0.8O3-x (LSCF) double layer cathodes on gadolinium-doped cerium oxide (CGO) electrolytes - II. Role of oxygen exchange and diffusion

Steele, BCH; Bae, Joongmyeon, SOLID STATE IONICS, v.106, no.3-4, pp.255 - 261, 1998-02

7557
Properties of pyrochlore ruthenate cathodes for intermediate temperature solid oxide fuel cells

Bae, Joongmyeon; Steele, BCH, JOURNAL OF ELECTROCERAMICS, v.3, no.1, pp.37 - 46, 1999-04

7558
Properties of selected sulfonated polymers as proton-conducting electrolytes for polymer electrolyte fuel cells

Bae, Joongmyeon; Honma, I; Murata, M; Yamamoto, T; Rikukawa, M; Ogata, N, SOLID STATE IONICS, v.147, no.1-2, pp.189 - 194, 2002-03

7559
PROPERTIES OF TURBULENCE IN TURBULENT-DIFFUSION FLAMES

TAKAGI, T; Shin, Hyun Dong; ISHIO, A, COMBUSTION AND FLAME, v.40, no.2, pp.121 - 140, 1981

7560
Proportional enlargement of movement by using an optically driven multi-link system with an elastic joint

Jeong, Yu-Jin; Lim, Tae-Woo; Son, Yong; Yang, Dong-Yol; Kong, Hong-Jin; Lee, Kwang-Sup, OPTICS EXPRESS, v.18, no.13, pp.13745 - 13753, 2010-06

rss_1.0 rss_2.0 atom_1.0