Browse "Dept. of Mechanical Engineering(기계공학과)" by Type Conference
Showing results 6601 to 6660 of 15772
| Low-Noise Mode-Locked Lasers for Fiber Strain Sensing Kim, Jungwon, International Conference on Optical Fiber Sensors (OFS) 2017, Optical Society Korea, 2017-04-25 |
| Low-noise optical frequency combs and their applications in microwave photonics Kim, Jungwon, IEEE Photonics Conference (IPC) 2016, IEEE, 2016-10-04 |
| Low-Noise Ultrafast Fiber Lasers Kim, Jungwon, 23rd Opto-Electronics and Communications Conference (OECC), IEEE, 2018-07 |
| Low-observable radomes composed of aramid/epoxy composites sandwich structures and frequency selective surface Lee, Dai Gil; Ilbeom Choi; Jin Gyu Kim; Il Sung Seo, 18th International Conference of Composite Materials (ICCM18), 한국복학재료학회(Korean Society for Composite Materials), 2011-08-21 |
| Low-order numerical model of free-surface wave in film flow on a rotating disk 김동주; 이민섭; 조아라; 김대겸, 2021 한국전산유체공학회 추계학술대회, 한국전산유체공학회, 2021-11-11 |
| Low-power and Self-powered Environmental Sensor Assisted by Deep-Learning Technology Park, Inkyu, 2021 IEEE International Electron Devices Meeting (IEDM), IEEE, 2021-12-11 |
| Low-repetition-rate fiber femtosecond laser oscillator Kim, Seung-Woo; Kim, Yunseok; Kim, Seungman; Han, Seunghwoi; Park, Sanguk; Park, Jiyong, 2012 Conference on Lasers and Electro-Optics(CLEO), CLEO, 2012-05 |
| Low-temperature, all-inorganic nanoparticle solution process for ZnO nanowire network transistor fabrication on a polymer substrate Ko, Seung Hwan; Park, Inkyu; Pan, H.; Misra, N.; Rogers, M.S.; Grigoropoulos, C.P.; Pisano, A .P., 2009 ASME Summer Heat Transfer Conference, ASME, 2009-07-19 |
| Low-temperature, Wet-chemical Route to the Selective and Direct Integration of TiO2 Nanotubes via Thermal-driven and Template-based Reactions and Applications to Ambient Light Sensors Park, Inkyu; Yang, D; Kim, D, 2012 MRS Fall Meeting, MRS, 2012-11 |
| Lower limb motion estimation using a single IMU based on mechanical characteristics during walking Lim, Hyerim; Kim, Myeongsub; Park, Su-Kyung, The 14th International Conference on Motion and Vibration Control (MoViC) 2018, The Korean Society for Noise and Vibration Engineering, 2018-08-08 |
| Lower Upper-Bound Analysis of the Ring-Rolling Process by using force Polycon Diaphram and Dual Velocity Field Yang, Dong-Yol; Ryoo, J. S.; Jhonson, W., Proc. 1st Int. Conf. on Technology of Plasticity, pp.1292 - 1298, 1984-09-03 |
| LPBF 공정에서 Fe-Si 합금의 데이터기반 공정조건 최적화 송병욱; 이익진, 2023 춘계 분말재료학회, (사)한국분말재료학회, 2023-04 |
| LPG COMBUSTION PHASE CONTROL IN LEAN STRATIFIED SPARK IGNITION ENGINE Lee, Sanguk; Park, Sangjae; Bae, Choongsik, International Conference on Sustainable Energy and Environmental Challenges (SEEC-2018), Indian Institute of Science Bangalore, 2018-01-02 |
| LPG 액상 분사엔진에서의 EGR에 따른 배기가스 특성 박용국; 우영민; 염기태; 장진영; 배충식, 한국자동차공학회 2002년도 기계관련 산학연 연합심포지엄 강연, pp.428 - 428, 한국자동차공학회, 2002-11 |
| LPG 액상분무의 분열 및 혼합특성 최동석; 최재준; 배충식, 한국자동차공학회 2001년 추계학술대회, pp.473 - 478, 한국자동차공학회, 2001-11 |
| LPG 희박성층연소의 분위기 압력에 따른 분무형상과 배기 이상욱; 박상재; 배충식, 2018년 한국액체미립화학회 학술강연회, 한국액체미립화학회, 2018-10-19 |
| LPG액상분사 아이싱 방지기구 박정서; 염기태; 장진영; 문석수; 박정남; 김성근; 배충식, 한국자동차공학회 2006년 춘계학술대회, v.0, no.0, pp.1817 - 1822, 한국자동차공학회, 2006-06 |
| LPG와 가솔린 예혼합 압축 착화 엔진의 배기가스 배출물 특성 염기태; 장진영; 배충식, 한국자동차공학회 2005년 추계학술대회, v.0, no.0, pp.28 - 33, 한국자동차공학회, 2005-11 |
| LSGM 기반의 다공성 Scaffold 연료극 SOFC에 관한 연구 윤병영; 김정현; 배중면, KSNRE 2012 annual spring meeting, KSNRE, 2012-06 |
| LSTDC / H∞ 제어를 이용한 불확실한 저감쇠 시스템의 제어 김준식; 오준호, 대한전자공학회 학술회의, pp.896 - 901, 대한전자공학회, 1994-10-17 |
| Lubrication characteristics under transient conditions in a swash-plate axial piston pump Shin, J.H.; Kim Kyung-Woong, ASIATRIB 2010, 2010-09-05 |
| LuGre 마찰 모델을 이용한 선형 임팩트 구동기의 Stick-slip 거동 시뮬레이션 이종현; 신영준; 김경수; 김수현, 한국정밀공학회 2009년도 춘계학술대회 , pp.279 - 280, 한국정밀공학회, 2009-06 |
| Lyapunov 안정성에 근거한 LQ 강건 제어 연구 김경수; 박영진, 대한전자공학회 학술회의, v.1, pp.505 - 510, 1994 |
| Lyapuonv 방법을 통한 근골격계의 자기안정화 특성의 해석적 연구 및 로봇 공학에의 응용 장한뜻; 김상준; 김정, ICROS(제어로봇시스템학회), 제어로봇시스템학회, 2015-12-09 |
| L자형 비틀림 구조 기반 광범위 가속도 측정용 압저항 센서에 대한 해석 정지훈; 엄준성; 이승섭; 서성호; 정홍집; 곽상은, 한국군사기술학회 추계학술대회 신관기술컨퍼런스, (사)한국군사기술학회, 2015-11-24 |
| L자형 유동 하의 방사형 플레이트 휜 히트 싱크의 열저항 예측 김성진; 이길호, 2016 춘계 학술대회, 대한기계학회, KSME, 2016-04-20 |
| L적분을 이용한 원호계면균열에서의 응력강도계수 계산 엄윤용, 대한기계학회 춘계학술대회, pp.38 - 41, 1991 |
| M-적분을 이용한 각형개재물의 모서리 특이응력장의 해석 엄윤용, 대한기계학회 재료 및 파괴부문 학술대회, pp.53 - 580, 1998 |
| MABEL, a new robotic bipedal walker and runner Grizzle, Jessy W; Hurst, Jonathan; Morris, Benjamin; Park, Hae-Won; Sreenath, Koushil, 2009 American Control Conference, ACC 2009, pp.2030 - 2036, IEEE, 2009-06-11 |
| Machinability studies of AA2024-T351 alloy with uncoated carbide tool Paresi, Prudvi Reddy; Arunachalam, N.; Lou, Yanshan; Yoon, Jeong Whan, 11th International Conference on Materials, Processing and Characterization (ICMPC), pp.1058 - 1064, ELSEVIER, 2020-12 |
| Machine learning assisted characterization of atherosclerotic plaque components via multispectral fluorescence lifetime imaging microscopy Han, Jeongmoo; Kim, Sunwon; Kim, Hyun Jung; Nam, Hyeong Soo; Kim, Jin Won; Yoo, Hongki, SPIE Photonics West 2023, SPIE, 2023-01-29 |
| Machine learning-enabled framework for the process optimization of metal 3D printing in soft magnetic alloys Song, Byunguk; Lee, Ikjin, The 2nd International Conference on Design for 3D Printing, ICD3DP 2023, The Korean Society of Mechanical Engineers, Nanyang Technological University, 2023-10 |
| Machine Learning-Incorporated Intravascular Optical Coherence Tomography-Fluorescence Lifetime Imaging (OCT-FLIm) Provides Automated and Comprehensive Structural-Biochemical Characterization of Coronary Atherosclerotic Plaques Kim, Sun Won; Nam, Hyeong Soo; Kang, Woojae; Song, Joon Woo; Han, Jeongmoo; Lee, Min Woo; Park, Hyun-Sang; et al, AHA Scientific Sessions 2019, American Heart Association, 2019-11-16 |
| Macintosh IIx and IBM PC Based Automatic Control Laboratory Park, Youngjin; Leu.M. Zhou, ASME International Computers in Engineering Conference, 1990 |
| Macrophage Dectin-1 Targeted Photoactivation Promotes Infl ammation Resolution WithStabilization ImagingStabilization of the High-Risk Atheroma as Serially Assessed by Intravascular OCT-NIRF Imaging Kim, Jin Hyuk; Kim, Yeon Hoon; Ahn, Jae Won; Kim, Hyun jung; Kim, Ryeong Hyun; Song, Joon woo; Park, Ye Hee; et al, AHA Scientific Sessions 2022, AHA, 2022-11-06 |
| Macrophage Targeted Theranostic Photoactivation Attenuates Plaque Inflammation and Regresses the Atheroma via Autophagy-Induced Cholesterol Efflux Assessed by Serial in vivo Imaging Song, Joon Woo; Lee, Min Woo; Kim, Hyun Jung; Joo, Young Dae; Choi, Jah Yeon; Oh, Wang-Yuhl; Yoo, Hongki; et al, AHA Scientific Sessions 2018, American Heart Association, 2018-11-11 |
| Magnetic Impact Actuator for Robotic Endoscope Kim, Soohyun; Min, HJ; Lim, HJ; Lim,YM; Park, JJ; Kim, BK, Intelligent Microsystem Symposium, pp.45 - 49, 2001 |
| Magnetic Refrigeration and its material issues 정상권, 2023년도 대한금속 재료학회 춘계학술대회, 대한금속 재료학회, 2023-04-27 |
| Magnetic Refrigerator for Hydrogen Re-liquefaction Application 박지호; 박인명; 이천규; 정상권, 2014년 한국수소 및 신에너지학회 추계학술대회, 한국수소 및 신에너지학회, 2014-11-06 |
| Magnetohydrodynamic flow of a liquid metal slug under a rotating magnetic field 문지후; 정재욱; 김대겸, 2023 한국가시화정보학회 추계학술대회, 한국가시화정보학회, 2023-11-16 |
| Maintaining State of Charge Method for Repetitive Driving LEE, JINWOO; Sung, ByungChul; Kim, Kyung-Soo; Kim, Soohyun, 17th International Conference on Control, Automation and Systems, ICCAS, 2017-10 |
| Manipulating Pore Sizes in PVA Brush 신소민; 김산하; 김동근, 76th Korea CMPUGM Technical Meeting, 한국에어로졸학회, 2022-11-17 |
| Manipulation of a sub-um sized particle using the unit cell of single CNT tip Lee, JS; Kim, Soohyun, International Symposium on Nanomanufacturing, pp.177 - 180, KAIST, 2004-11-03 |
| Manipulation of microparticles inside a droplet using surface acoustic waves Park, Kwangseok; Jung, Jin Ho; Park, Jinsoo; Destgeer, Ghulam; Ahmed, Husnain; Sung, Hyung Jin, Korean Society of Visualization, Fall Annual Meeting, 한국가시화정보학회, 2016-12-02 |
| Manipulation of multi-polar electric field profile in micro fluidic cell culture platform Jung, Hyuntae; Cho, Young Bin; Ko, Ung Hyun; Shin, Jennifer Hyunjong, IBEC 2016 추계학술대회, 대한의용생체공학회, 2016-11 |
| Manipulationof source width based on sound field reproduction Lee, Jung-Min; Choi, Jung-Woo; Kim, Yang-Hann, 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control, INTERNOISE 2014, Australian Acoustical Society, 2014-11 |
| Manipulator Path Design to Reduce End Point Residual Vibration Park, KJ; Park, Youn-sik, International Conference on Motion and Vibration Control, pp.471 - 476, 1992-09 |
| Manufacture and experiment of a compliant parallel XY nano-positioning stage for high dynamic performance Jeong, Jae Heon; Kim, Myeong-Hyeon; Woo, Siwoong; Lee, Hak Jun; Park, Jae Hyun; Ahn, Dahoon; Kim, Hyoyoung; et al, 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016, euspen, 2016-05 |
| Manufacture of composite screw rotors for air compressors by RTM process Suh J.D.; Lee, Dai Gil, 5th Asia Pacific Conference on Materials Processing, v.113, no.40546, pp.196 - 201, 2001-06-25 |
| Manufacture of One-piece Automotive Drive Shafts with Aluminum and Composite Materials Durk Hyun Cho,; Lee, Dai Gil; Jin Ho Choi, International Conference on Composite Structures , 1997 |
| Manufacturing and Testing of Chatter-Free Boring Bars. Lee, Dai Gil, Vibration Conference, v.37, no.0, pp.82 - 91, CIRP, 1988-06 |
| Manufacturing of bi-layered copper nanostructural thin sheet using electrodeposition and its application for high efficient particulate air filter 장지혜; 김산하; 유승훈; 정지훈, 대한기계학회 Annual Meeting 2022, 대한기계학회, 2022-11-10 |
| Manufacturing of medium carbon steel wires with improved spheroidization by non-circular drawing sequence Joo, HoSeon; Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il-Heon; Bae, Chul Min, 11th International Conference on Technology of Plasticity, ICTP 2014, pp.682 - 687, The Japan Society for Technology of Plasticity, Material Forming and Processing Laboratory Nagoya University, Frontier Forming System Laboratory Toyohashi University of Technology, 2014-10-21 |
| Manufacturing of medium carbon steel wires with improved spheroidization by non-circular drawing sequence Joo, HoSeon; Hwang, Sun Kwang; Baek, Hyun Moo; Im, Yong-Taek; Son, Il Heaon; Bae, Chul Min, 11th International Conference on Technology of Plasticity, ICTP 2014, pp.682 - 687, Elsevier, 2014-10 |
| Manufacturing of Structurally Hierarchical Copper Surface for High Performance Lithium-Metal Battery Anode Current Collectors Yang, Inyeong; Jeong, Ji-hun; Seok, Jae Young; Kim, Sanha, The 9th International Conference on Manufacturing, Machine Design and Tribology, ICMDT 2023, KSME, 2023-03-10 |
| Manufacturing of the carbon/phenol composite bipolar plate for PEMFC with hot rolling process Kim, Min Kook; Choe, Jae Heon; Lim, Jun Woo; Lee, Dai Gil, 18th International Conference on Composite Structures, ICCS18, 2015-06-18 |
| Mapping 2D Midship Drawings into 3D Structural Models based on STEP AP218 Hwang, Ho-Jin; Han, Soonhung; Kim, Yong-Dea, pp.0 - 0, 2002-07-01 |
| Mapping coastal wind field using wind-current transfer function analysis Kim, Sung Yong, 2013 International Conference on Aerodynamics of Offshore Wind Wakes, Technical University of Denmark, 2013-06 |
| Mapping coastal wind field using wind-current transfer function analysis Kim, Sung Yong, International Conference on Aerodynamics of Offshore Wind Energy Systems and Wakes (ICOWES2013), Technical University of Denmark, 2013-06-17 |
| Mapping coastal wind field using wind-current transfer function analysis (invited) Kim, Sung Yong, Wind Energy Department, Technical University of Denmark (DTU), DTU, 2013-08 |
Discover
Open Access
Date issued
- 4,101 2020 - 2024
- 12,341 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989