Showing results 5341 to 5400 of 12271
Incremental object learning and robust tracking of multiple objects from RGB-D point set Koo, Seongyong; Lee, Dongheui; Kwon, Dong-Soo, JOURNAL OF VISUAL COMMUNICATION AND IMAGE REPRESENTATION, v.25, no.1, pp.108 - 121, 2014-01 |
Indenter Study: Associations Between Prostate Elasticity and Lower Urinary Tract Symptoms Kim, Kwang Hyun; Ahn, Bummo; Lim, Sey Kiat; Han, Woong Kyu; Kim, Jang Hwan; Rha, Koon Ho; Kim, Jung, UROLOGY, v.83, no.3, pp.544 - 548, 2014-03 |
Independent component analysis based source number estimation and its comparison for mechanical systems Cheng, Wei; Lee, Seungchul; Zhang, Zhousuo; He, Zhengjia, JOURNAL OF SOUND AND VIBRATION, v.331, no.23, pp.5153 - 5167, 2012-11 |
Independent traction control for uneven terrain using stick-slip phenomenon: application to a stair climbing robot Choi, HD; Woo, CK; Kim, Soohyun; Kwak, Yoon Keun; Yoon, S, AUTONOMOUS ROBOTS, v.23, no.1, pp.3 - 18, 2007-07 |
Indirect adaptive control of an autonomous underwater vehicle-manipulator system for underwater manipulation tasks Mohan, Santhakumar; Kim, Jinwhan, OCEAN ENGINEERING, v.54, pp.233 - 243, 2012-11 |
Indirect input identification by modal filter technique Kim, YR; Kim, Kwang-joon, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, v.13, no.6, pp.893 - 910, 1999-11 |
Indirect input identification in multi-source environments by principal component analysis Cho, MS; Kim, Kwang-joon, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, v.16, no.5, pp.873 - 883, 2002-09 |
Indirect Measurements of Coherent Thermal Emission from a Truncated Photonic Crystal Structure Lee, Bong Jae; Zhang, Z. M., JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, v.23, no.1, pp.9 - 17, 2009 |
Indium capillary liquid-metal-ion-source G operation in the flow resistance regime Tajmar, Martin, JOURNAL OF PHYSICS D-APPLIED PHYSICS, v.37, no.21, pp.3056 - 3057, 2004-11 |
Indium field emission electric propulsion microthruster experimental characterization Tajmar, Martin; Genovese, A; Steiger, W, JOURNAL OF PROPULSION AND POWER, v.20, no.2, pp.211 - 218, 2004 |
Indium ion emission from nanotube fibres Hulman, Martin; Tajmar, Martin, NANOTECHNOLOGY, v.18, no.49, 2007-12 |
Individual finger movement decoding using a novel ultra-high-density electroencephalography-based brain-computer interface system Lee, Hyemin S. S.; Schreiner, Leonhard; Jo, Seong-Hyeon; Sieghartsleitner, Sebastian; Jordan, Michael; Pretl, Harald; Guger, Christoph; et al, FRONTIERS IN NEUROSCIENCE, v.16, 2022-10 |
Inducing Nanoscale Morphology Changes of Pentaerythritol Tetranitrate Using a Heated Atomic Force Microscope Cantilever Nafday, Omkar A.; Weeks, Brandon L.; King, William P.; Lee, Jungchul, JOURNAL OF ENERGETIC MATERIALS, v.27, no.1, pp.1 - 16, 2009 |
Inductive Micro Displacement Detecting System with High Sensitivity and Low Linearity Error Dong-June Choi; In-Mook Choi; Soo Hyun Kim, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.2, no.3, pp.54 - 60, 2001-09 |
Industrial issues and solutions to statistical model improvement: a case study of an automobile steering column Son, Hyejeong; Lee, Guesuk; Kang, Kyeonghwan; Kang, Young-Jin; Youn, Byeng D.; Lee, Ikjin; Noh, Yoojeong, STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, v.61, no.4, pp.1739 - 1756, 2020-04 |
Industrieroboter mit taktilen Sensoren zur Kontaktteilmontage Schlaich, G.; Gweon, Dae-Gab; Cho, H. S., WERKSTATTSTECHNIK, v.77, no.12, pp.671 - 674, 1987 |
Inelastic buckling behavior of steel members under reversed cyclic loading Lee, PhillSeung; Noh, HC, ENGINEERING STRUCTURES, v.32, no.9, pp.2579 - 2595, 2010-09 |
Inertia-driven flow symmetry breaking by oscillating plates Lim, Daegyu; Lahooti, Mohsen; Kim, Daegyoum, AIP ADVANCES, v.9, no.10, 2019-10 |
Inertial migration of a 3D elastic capsule in a plane Poiseuille flow Kim, Boyoung; Chang, Cheong Bong; Park, Sung Goon; Sung, Hyung Jin, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, v.54, pp.87 - 96, 2015-08 |
Inertial migration of an elastic capsule in a Poiseuille flow Shin, Soo-Jai; Sung, Hyung-Jin, PHYSICAL REVIEW E, v.83, no.4, 2011-04 |
INFERENCE ON ROBOTIC ASSEMBLY PRECEDENCE CONSTRAINTS USING A PART CONTACT LEVEL GRAPH CHO, DY; Cho, Hyungsuck, ROBOTICA, v.11, pp.183 - 2, 1993-03 |
Inferencing assembly direction using vector analysis 신철균; 조형석, 대한기계학회지, 1993 |
Inflammatory coronary ectasia identified by three-dimensional volume rendering of F-18-Fluorodeoxyglucose PET/CT Park, Eun Jin; Lee, Sinae; Nam, Hyeong Soo; Oh, Dong Joo; Kim, Ji Bak; Yoo, Hongki; Kim, Jin Won, EUROINTERVENTION, v.13, no.2, pp.E227 - E227, 2017-06 |
Influence of a large-eddy breakup device on the frictional drag in a turbulent boundary layer Kim, Joon-Seok; Hwang, Jinyul; Yoon, Min; Ahn, Junsun; Sung, Hyung Jin, PHYSICS OF FLUIDS, v.29, no.6, 2017-06 |
Influence of Acceptor Type and Polymer Molecular Weight on the Mechanical Properties of Polymer Solar Cells Choi, Joonhyeong; Kim, Wansun; Kim, Seonha; Kim, Taek-Soo; Kim, Bumjoon J., CHEMISTRY OF MATERIALS, v.31, no.21, pp.9057 - 9069, 2019-09 |
Influence of backflow on skin friction in turbulent pipe flow Jalalabadi, Razieh; Sung, Hyung Jin, PHYSICS OF FLUIDS, v.30, no.6, 2018-06 |
The Influence of Charge Dilution and Injection Timing on Low-Temperature Diesel Combustion and Emissions Kook, Sanghoon; Bae, Choongsik; Miles, Paul C; Choi, Dae; Pickett, Lyle M, SAE 2005 Powertrain & Fluid Systems Conference, San Antonio, 2005. 10, 2005-10 |
Influence of compressive load conditions and thickness on the two-way shape memory behavior in tube-shaped NiTi alloy Yoo, Young-Ik; Shin, Dong-Kil; Lee, Chang-Ho; Lee, Jung-Ju, SMART MATERIALS AND STRUCTURES, v.21, no.10, 2012-10 |
Influence of dispersant concentration toward enhancing printing precision and surface quality of vat photopolymerization 3D printed ceramics Kim, Insup; Kim, Sanglae; Andreu, Alberto; Kim, Jeong-Hwan; Yoon, Yong-Jin, ADDITIVE MANUFACTURING, v.52, 2022-04 |
Influence of driving forces on weld pool dynamics in GTA and laser welding Han, Sang-Woo; Cho, Won-Ik; Na, Suck-Joo; Kim, Cheol-Hee, WELDING IN THE WORLD, v.57, no.2, pp.257 - 264, 2013-03 |
Influence of early drop bouncing on heat transfer during drop impact Ko, Young Su; Kim, Jeonghwan; Ryu, Seunggeol; Han, Jeonghoon; Nam, Youngsuk; Lee, Choongyeop, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, v.137, 2022-10 |
Influence of early fuel injection timings on premixing and combustion in a diesel engine Kook, Sanghoon; Park, Seik; Bae, Choongsik, ENERGY & FUELS, v.22, no.1, pp.331 - 337, 2008-01 |
Influence of fabrication residual thermal stresses on rubber-toughened adhesive tubular single lap steel-steel joints under tensile load Kim, YG; Lee, Dai Gil, JOURNAL OF ADHESION, v.65, no.1-4, pp.163 - 185, 1998 |
Influence of Geometric Patterns of Microstructured Superhydrophobic Surfaces on Water-Harvesting Performance via Dewing Seo, Donghyun; Lee, Choongyeop; Nam, Youngsuk, LANGMUIR, v.30, no.51, pp.15468 - 15476, 2014-12 |
INFLUENCE OF HEATING RATE ON THE LASER SURFACE HARDENING OF A MEDIUM CARBON-STEEL Na, Suck-Joo; YANG, YS, SURFACE COATINGS TECHNOLOGY, v.34, no.3, pp.319 - 330, 1988-05 |
Influence of impedance phase angle on sound pressures and reverberation times in a rectangular room Jeong, Cheol-Ho; Lee, Doheon; Santurette, Sebastien; Ih, Jeong-Guon, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, v.135, no.2, pp.712 - 723, 2014-02 |
Influence of indenter geometry on half-plane with edge crack subjected to fretting condition Kim, HK; Lee, Soon-Bok, THEORETICAL AND APPLIED FRACTURE MECHANICS, v.36, no.2, pp.125 - 139, 2001 |
Influence of inflow disturbances on stagnation-region heat transfer Bae S.; Lele S.K.; Sung, Hyung Jin, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, v.122, no.2, pp.258 - 265, 2000 |
Influence of initial back stress on the earing prediction of drawn cups for planar anisotropic aluminum sheets Yoon, Jeong Whan; Barlat, F; Chung, K; Pourboghrat, F; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.80-1, pp.433 - 437, 1998 |
Influence of injector spray angle and gasoline-diesel blending ratio on the low load operation in a gasoline compression ignition (GCI) engine Pinazzi, Pietro Matteo; Hwang, Joonsik; Kim, Donghoon; Foucher, Fabrice; Bae, Choongsik, FUEL, v.222, no.15, pp.496 - 505, 2018-06 |
Influence of lamination pressure upon the stiffness of laminated rotor Kim, YC; Kim, Kyung-Woong, JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, v.49, no.2, pp.426 - 431, 2006-06 |
Influence of large-scale accelerating motions on turbulent pipe and channel flows Hwang, Jinyul; Lee, Jin; Sung, Hyung Jin, JOURNAL OF FLUID MECHANICS, v.804, pp.420 - 441, 2016-10 |
Influence of large-scale motions on the frictional drag in a turbulent boundary layer Hwang, Jinyul; Sung, Hyung Jin, JOURNAL OF FLUID MECHANICS, v.829, pp.751 - 779, 2017-10 |
Influence of local ultrasonic forcing on a turbulent boundary layer Park, YS; Sung, Hyung Jin, EXPERIMENTS IN FLUIDS, v.39, no.6, pp.966 - 976, 2005-12 |
Influence of lubricant-mediated droplet coalescence on frosting delay on lubricant impregnated surfaces Seo, Donghyun; Oh, Seungtae; Moon, Byungyun; Kim, Hyunsik; Kim, Juhyok; Lee, Choongyeop; Nam, Youngsuk, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.128, pp.217 - 228, 2019-01 |
Influence of Oxygen Supply in an Iron Ore Sintering Process Kang, Heejin; Choi, Sangmin; Yang, Won; Cho, Byungkook, ISIJ INTERNATIONAL, v.51, no.7, pp.1065 - 1071, 2011 |
Influence of pad shape on self-alignment in electronic packaging Ahn, DH; Lee, J; Yoo, CD; Kim, YS, JOURNAL OF ELECTRONIC MATERIALS, v.35, no.3, pp.411 - 415, 2006-03 |
Influence of pad-pivot friction on tilting pad journal bearing Kim, Sung-Gi; Kim, Kyung-Woong, TRIBOLOGY INTERNATIONAL, v.41, no.8, pp.694 - 703, 2008-08 |
Influence of power source dynamics on metal and heat transfer behaviors in pulsed gas metal arc welding Zhao, Yangyang; Chung, Hyun, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.121, pp.887 - 899, 2018-06 |
Influence of process parameters on the surface roughness in hotwire cutting of EPS foam sheet for VLM-S rapid prototyping process Ahn, DG; Lee, SH; Yang, Dong-Yol, JOURNAL OF MATERIALS SCIENCE, v.40, no.21, pp.5699 - 5702, 2005-11 |
Influence of reflected arc light on vision sensors for automatic GTAW systems Yu, JY; Kim, JI; Na, Suck-Joo, WELDING JOURNAL, v.82, no.2, pp.36 - 42, 2003-02 |
Influence of simulation methods of temperature distribution on thermal and metallurgical characteristics in GMA welding Cheon, Jason; Na, Suck-Joo, MATERIALS & DESIGN, v.108, pp.183 - 194, 2016-10 |
Influence of spring dynamics and friction on a spring-actuated cam system Ahn, KY; Kim, Soohyun, ARCHIVE OF APPLIED MECHANICS, v.71, no.8, pp.497 - 508, 2001-08 |
Influence of surface wettability on transition of two-phase flow pattern in round mini-channels Lee, Chi Young; Lee, Sang Yong, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, v.34, no.7, pp.706 - 711, 2008-07 |
The Influence of Swirl Ratio and Injection Parameters on CO Emission and Fuel Conversion Efficiency for High-Dilution, Low-Temperature Combustion in an Automotive Diesel Engine Kook, Sanghoon; Bae, Choongsik; C Miles, Paul; Choi, Dae; Bergin, Michael; Reitz, D. Rolf, SAE Transactions, Journal of Engines, Vol. 114, Sec. 3, 2006-04 |
Influence of Taylor cone size on droplet generation in an indium liquid metal ion source Tajmar, Martin, APPLIED PHYSICS A-MATERIALS SCIENCE PROCESSING, v.81, no.7, pp.1447 - 1450, 2005-11 |
Influence of tensile properties on hole expansion ratio investigated using a generative adversarial imputation network with explainable artificial intelligence Lee, Jeong Ah; Park, Jaejung; Choi, Yeon Taek; Kim, Rae Eon; Jung, Jaimyun; Lee, Seungchul; Seo, Min Hong; et al, JOURNAL OF MATERIALS SCIENCE, v.58, no.11, pp.4780 - 4794, 2023-03 |
Influence of Tensile Speeds on the Failure Loads of the DP590 Spot Weld under Various Combined Loading Conditions Song, Jung Han; Huh, Hoon, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015 |
Influence of the delivery systems using a microneedle array on the permeation of a hydrophilic molecule, calcein Oh, Jae-Ho; Park, Hyoun-Hyang; Do, Ki-Young; Han, Manhee; Hyun, Dong-Hun; Kim, Chang-Gyu; Kim, Chang-Hyeon; et al, EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS, v.69, no.3, pp.1040 - 1045, 2008-08 |
Influence of the silicon substrate thickness on the response of thin film pyroelectric detectors Ko, JS; Liu, WG; Zhu, WG; Kwak, Byung Man, SOLID-STATE ELECTRONICS, v.46, no.8, pp.1155 - 1161, 2002-08 |
Discover